Car part
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
-
Suspension
- Wheel hub Nissan HGS130 2.8 200 hp Petrol
- Wheel bearing Nissan HGS130 2.8 200 hp Petrol
- Top strut mount and bearing Nissan HGS130 2.8 200 hp Petrol
- Anti-roll bar link Nissan HGS130 2.8 200 hp Petrol
- Track rod end Nissan HGS130 2.8 200 hp Petrol
- Inner tie rod Nissan HGS130 2.8 200 hp Petrol
- Ball joint Nissan HGS130 2.8 200 hp Petrol
- Suspension bushes Nissan HGS130 2.8 200 hp Petrol
- Shock absorber dust cover and bump stops Nissan HGS130 2.8 200 hp Petrol
- Anti-roll bar bushes Nissan HGS130 2.8 200 hp Petrol
- Axle bushes 280ZX 2.8 200 hp Petrol
- Wheel bolts and wheel nuts 280ZX 2.8 200 hp Petrol
- Wheel nuts 280ZX 2.8 200 hp Petrol
- Wiper and washer system
Suspension arm Nissan HGS130 2.8 200 hp Petrol
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
NISSAN 280 ZX,ZXT (HGS130) 2.8 year of manufacture 1983, 200 hp vehicle parts products
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle Right, Lower
- Material: Steel
- Control/Trailing Arm Type: Control Arm
- Paired product: 42630
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 3,16
- Supplementary Article / Supplementary Info: with rubber mounts
- Observe service information
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Control/Trailing Arm Type: Trailing Arm
- Paired product: SCA-6692
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Right, Lower
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 390
- Height [mm]: 70
- Paired product: TC1307
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 375
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Right, Lower
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 430
- Height [mm]: 85
- Paired product: TC2467
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 390
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Left, Rear
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Left, Lower
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 430
- Height [mm]: 85
- Paired product: TC2468
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 390
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Material: Steel
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 282
- Cone Size [mm]: 16
- Paired product: 210476
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 2,094
- as standard
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Supplementary Info: Original VAICO Quality
- Fitting Position: Right, Lower Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Paired product: V46-0115
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 9,3
- Packaging height [cm]: 34,1
- Packaging Depth [cm]: 23,5
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle Right, Lower
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 360
- Height [mm]: 50,5
- Paired product: TC3910
- Thread Size 1: 19.95
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 319
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle Left, Lower
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 360
- Height [mm]: 50,5
- Paired product: TC3911
- Thread Size 1: 19.95
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 319
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 346
- Paired product: JTC2563
- Diameter 1 [mm]: 14,2
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Left, Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Cone Size [mm]: 20
- Paired product: 179807
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 3,259
- Supplementary Article / Supplementary Info: with rubber mounts
- Observe service information
- Condition: New
Over 100 in stock
