Car part
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
-
Steering
- Track rod end Nissan HGS130 2.8 140 hp Petrol
- Inner tie rod Nissan HGS130 2.8 140 hp Petrol
- Tie rod Nissan HGS130 2.8 140 hp Petrol
- Ball joint Nissan HGS130 2.8 140 hp Petrol
- Power steering pump Nissan HGS130 2.8 140 hp Petrol
- Steering rack Nissan HGS130 2.8 140 hp Petrol
- Power steering filter Nissan HGS130 2.8 140 hp Petrol
- Steering shaft Nissan HGS130 2.8 140 hp Petrol
- Gasket set, hydraulic pump Nissan HGS130 2.8 140 hp Petrol
- Suspension
- Wiper and washer system
Power steering pump Nissan HGS130 2.8 140 hp Petrol
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
NISSAN 280 ZX,ZXT (HGS130) 2.8 year of manufacture 1978, 140 hp vehicle parts products
-47%
compared to RRP:
£577,01
incl. 20% VAT, free delivery
- Operating Mode: Electric-hydraulic
- Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles
- Observe technical data
- Condition: Remanufactured
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- for steering manufacturer: SAGINAW
- Supplementary Article / Supplementary Info: without reservoir
- Number of grooves: 6
- Pulleys: with belt pulley
- Pressure [bar]: 80
- Rotation Direction: Clockwise rotation
- New part without deposit
- Assy./disassy. by qualified personnel required!
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Pressure [bar]: 110
- Operating Mode: Hydraulic
- Material: Aluminium
- Valve type: Pressure Limiting Valve
- Belt Pulley Ø [mm]: 125
- Pulleys: with belt pulley
- Rotation Direction: Clockwise rotation
- Number of inlets/outlets: 1
- Pump Type: Vane Pump
- Number of grooves: 6
- Weight [kg]: 2,17
- Operating Pressure [bar]: 80
- Number of ribs: 6
- Flow rate [l/h]: 50
- Mounting Points Distance [mm]: 41
- Always compare old and new part (in particular OE No.)
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- for steering manufacturer: ZF
- Supplementary Article / Supplementary Info: without reservoir
- Pulleys: without belt pulley
- Pressure [bar]: 120
- Rotation Direction: Clockwise rotation
- New part without deposit
- Assy./disassy. by qualified personnel required!
- Condition: New
Over 100 in stock
-38%
compared to RRP:
£147,34
incl. 20% VAT, excl. delivery costs
- Pressure [bar]: 110
- Operating Mode: Hydraulic
- Valve type: Pressure Limiting Valve
- Pump Type: Vane Pump
- Distance of mounting bores [mm]: 80
- Suction pipe connector diameter [mm]: 16
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Operating Mode: Hydraulic
- Manufacturer Restriction: SAGINAW
- Pulleys: without belt pulley
- Number of inlets/outlets: 2
- Supplementary Article / Supplementary Info Info 2: without adapter
- Distance of mounting bores [mm]: 80
- Suction pipe connector diameter [mm]: 16
- Mounting points diameter [mm]: 8
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Operating Mode: Hydraulic
- for steering manufacturer: ZF
- Manufacturer Restriction: Hub Height 104mm
- Pressure [bar]: 125
- Net weight [kg]: 1,72
- Number of mounting bores: 3
- Condition: Remanufactured
Over 100 in stock
-33%
compared to RRP:
£220,99
incl. 20% VAT, free delivery
- Operating pressure to [bar]: 8
- Diameter [mm]: 17
- Rotation Direction: Clockwise rotation
- Operating Mode: Hydraulic
- Pulleys: with belt pulley
- Weight [kg]: 1,906
- for OE number: 49110-3X01A
- Internal Thread Size: M16 x 1,5
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- for steering manufacturer: SAGINAW
- Supplementary Article / Supplementary Info: without reservoir
- Number of grooves: 5
- Pulleys: with belt pulley
- Pressure [bar]: 90
- Rotation Direction: Clockwise rotation
- New part without deposit
- Assy./disassy. by qualified personnel required!
- Condition: New
Over 100 in stock
-51%
compared to RRP:
£293,00
incl. 20% VAT, free delivery
- Manufacturer Restriction: DELPHI, SAGINAW
- Operating Mode: Hydraulic
- Housing Type: Aluminium Housing
- Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles
- Pressure [bar]: 100
- Observe technical data
- Exchange Part
- Condition: Remanufactured
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Operating Mode: Hydraulic
- Pressure [bar]: 95, 100
- Belt Pulley Ø [mm]: 125
- Number of grooves: 5
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Operating Mode: Hydraulic
- for OE number: 1094962, 1 094 962
- Manufacturer Restriction: ZF
- Number of inlets/outlets: 2
- Distance from adapter to pump [mm]: 32
- Distance of mounting bores [mm]: 70
- Suction pipe connector diameter [mm]: 16
- Condition: New
Over 100 in stock
