Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
-
Suspension
- Suspension arm Mitsubishi Lancer 8 Saloon 1.8DI-D 116 hp Diesel
- Wheel hub Mitsubishi Lancer 8 Saloon 1.8DI-D 116 hp Diesel
- Wheel bearing Mitsubishi Lancer 8 Saloon 1.8DI-D 116 hp Diesel
- Top strut mount and bearing Mitsubishi Lancer 8 Saloon 1.8DI-D 116 hp Diesel
- Anti-roll bar link Mitsubishi Lancer 8 Saloon 1.8DI-D 116 hp Diesel
- Track rod end Mitsubishi Lancer 8 Saloon 1.8DI-D 116 hp Diesel
- Engine mount Mitsubishi Lancer 8 Saloon 1.8DI-D 116 hp Diesel
- Suspension kit Mitsubishi Lancer 8 Saloon 1.8DI-D 116 hp Diesel
- Inner tie rod Mitsubishi Lancer 8 Saloon 1.8DI-D 116 hp Diesel
- ABS sensor Mitsubishi Lancer 8 Saloon 1.8DI-D 116 hp Diesel
- Ball joint LANCER 1.8DI-D 116 hp Diesel
- Shock absorber dust cover and bump stops LANCER 1.8DI-D 116 hp Diesel
- Suspension bushes LANCER 1.8DI-D 116 hp Diesel
- Steering knuckle LANCER 1.8DI-D 116 hp Diesel
- Tyre pressure sensor (TPMS) LANCER 1.8DI-D 116 hp Diesel
- Anti-roll bar bushes LANCER 1.8DI-D 116 hp Diesel
- Axle bushes LANCER 1.8DI-D 116 hp Diesel
- Wheel bolts and wheel nuts LANCER 1.8DI-D 116 hp Diesel
- Wheel spacers LANCER 1.8DI-D 116 hp Diesel
- Repair kit, wheel suspension LANCER 1.8DI-D 116 hp Diesel
- Steering rack boot LANCER 1.8DI-D 116 hp Diesel
- Spring cap LANCER 1.8DI-D 116 hp Diesel
- Camber bolts LANCER 1.8DI-D 116 hp Diesel
- Wheel nuts LANCER 1.8DI-D 116 hp Diesel
- Leaf spring LANCER 1.8DI-D 116 hp Diesel
- Mounting, shock absorbers LANCER 1.8DI-D 116 hp Diesel
- Anti-roll bar stabiliser kit LANCER 1.8DI-D 116 hp Diesel
- Nut, stub axle LANCER 1.8DI-D 116 hp Diesel
- Steering knuckle bushing LANCER 1.8DI-D 116 hp Diesel
- Shaft seal, wheel hub LANCER 1.8DI-D 116 hp Diesel
- Repair kit, support- / steering link LANCER 1.8DI-D 116 hp Diesel
- Subframe LANCER 1.8DI-D 116 hp Diesel
- Steering mounting LANCER 1.8DI-D 116 hp Diesel
- Shock absorber mounting brackets LANCER 1.8DI-D 116 hp Diesel
- Towbar / parts
- Wiper and washer system
Ball joint Mitsubishi Lancer 8 Saloon 1.8 DI-D 116 hp Diesel
Article №: MI-464
Details
- Fitting Position: Front Axle, Lower
- Weight [kg]: 0,34
- Thread Size 1: 20
- Height [mm]: 50
- Material: Steel
- Width [mm]: 50
- max. length [mm]: 77
- Condition: New
More
£6,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: SJ1408
Details
- Fitting Position: Front Axle, Lower, both sides, Front axle both sides, Front Axle Left, Front Axle Right
- Required quantity: 2
- Condition: New
More
£7,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: SBK-8101
Details
- Fitting Position: Upper, Left, Right
- Cone Pitch: 1/8
- Thread Size: R-M10×1,25
- Weight [kg]: 0,19
- Condition: New
More
£8,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 9971084
Details
- Fitting Position: Front axle both sides
- Cone Size [mm]: 20
- Cone Pitch: /
- Diameter [mm]: 40,1
- Condition: New
More
£8,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: MI-474
Details
- Fitting Position: Front Axle, Lower
- Weight [kg]: 0,377
- Thread Size 1: 20
- Height [mm]: 49
- Material: Steel
- Width [mm]: 49
- max. length [mm]: 73
- Condition: New
More
£8,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: SBK-8142
Details
- Fitting Position: Lower Left, Lower Right
- Cone Size [mm]: 17
- Cone Pitch: 1/8
- Thread Size: R-M12×1,25
- Weight [kg]: 0,3
- Condition: New
More
£8,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: SS7637
Details
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Required quantity: 2
- Condition: New
More
£8,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 450 493
Details
- Fitting Position: Lower, Front Axle Left, Front Axle Right
- Construction Year to: 12/2013
- Control/Trailing Arm Type: Control Arm
- Condition: New
More
£9,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 73528
Details
- Fitting Position: Lower Front Axle
- Fitted Diameter [mm]: 20
- Diameter [mm]: 40
- Overall Height [mm]: 72
- Condition: New
More
£9,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: DSS2858
Details
- Fitting Position: Lower Front Axle
- Cone Size [mm]: 20,0
- for OE number: 4013A281
- Bore Diameter [mm]: 40,0
- Paired product: 100
- Condition: New
More
£9,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 0408077
Details
- Fitting Position: Front Axle Right, Front Axle Left
- Condition: New
More
£10,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 472 628
Details
- Fitting Position: Front Axle
- Cone Size [mm]: 20
- Condition: New
More
£10,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: SB-7102
Details
- Fitting Position: Lower Left, Lower Right
- Cone Size [mm]: 15
- Cone Pitch: 1/8
- Thread Size: R-M12×1,25
- Weight [kg]: 0,45
- Condition: New
More
£10,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: SUG1065
Details
- Fitting Position: Front Axle
- Cone Size [mm]: 20
- Diameter [mm]: 40,1
- Weight [kg]: 0,404
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting
- Packaging length [cm]: 9
- Packaging width [cm]: 6,5
- Packaging height [cm]: 14
- Condition: New
More
£10,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 10Z5021-OYO
Details
- Fitting Position: Front Axle Left, Front Axle Right, outer, Lower
- Cone Size [mm]: 20
- Diameter [mm]: 40,1
- Condition: New
More
£10,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: BBJ5677
Details
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Diameter [mm]: 20
- Control/Trailing Arm Type: for control arm
- Mounting Type: Pressed
- Version: Fitting Kit
- Bore Diameter 1 [mm]: 20
- Bore Diameter 2 [mm]: 39,8
- Condition: New
More
£10,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 53181
Details
- Fitting Position: Front axle both sides
- Condition: New
More
£11,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: MI-734
Details
- Fitting Position: Front Axle
- Weight [kg]: 0,352
- Thread Size 1: 20
- Height [mm]: 43
- Material: Steel
- Width [mm]: 43
- max. length [mm]: 70
- Condition: New
More
£11,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: N4865018
Details
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Cone Size [mm]: 20
- Condition: New
More
£15,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 8500 42562
Details
- Fitting Position: Front Axle
- Cone Size [mm]: 20, 18
- Diameter [mm]: 39,7
- Required quantity: 2
- Mounting Type: Press-fitted
- for article number: 8500 42563, 8500 42564
- Condition: New
More
£15,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: CBM-36
Details
- Fitting Position: Front axle both sides, Front Axle, Lower
- Supplementary Article / Supplementary Info: without pressure pin
- Diameter [mm]: 43
- Length [mm]: 43
- Weight [kg]: 0.4
- for OE number: 4013A282, 4013A281, 4013A010, 4013A009
- Supplementary Article / Supplementary Info Info 2: without nut, without bolts
- Height [mm]: 51
- Material: Polychloroprene (Neoprene)
- Weight [g]: 362
- Bolt Head-/Nut Design: Conical Nut
- Bolt/Nut Version: without plain washer
- Gross Weight [g]: 412
- Machined: without dowel hole
- Condition: New
More
£16,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 55063
Details
- Fitting Position: Lower, Front Axle Left, Front Axle Right
- External Thread [mm]: M12 x 1,25
- Supplementary Article / Supplementary Info Info 2: with nut
- Height [mm]: 83,3
- Condition: New
More
£17,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: S 025
Details
- Fitting Position: Front axle both sides, Lower
- Weight [kg]: 0,34
- Condition: New
More
£17,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: G3-1106
Details
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Required quantity: 2
- Bolt Head Diameter [mm]: 20
- Condition: New
More
£18,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 0104-0330
Details
- Fitting Position: Front Axle, Front Axle Right, Front Axle Left, Left
- Weight [kg]: 1
- Control/Trailing Arm Type: Control Arm
- Core Dimensions: SIZE:W110×H70×L70, BOX#:BB01
- Condition: New
More
£19,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Showing 25 out of 90 products
Show the next items
- 1
- 2
- 3
- 4
