Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
-
Ignition and preheating
- Spark plugs Mitsubishi Lancer 7 Saloon 1.6 (CS3A) 105 hp Petrol
- Ignition coil Mitsubishi Lancer 7 Saloon 1.6 (CS3A) 105 hp Petrol
- Camshaft sensor Mitsubishi Lancer 7 Saloon 1.6 (CS3A) 105 hp Petrol
- Ignition leads Mitsubishi Lancer 7 Saloon 1.6 (CS3A) 105 hp Petrol
- Crankshaft sensor Mitsubishi Lancer 7 Saloon 1.6 (CS3A) 105 hp Petrol
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Wiper and washer system
Spark plugs Mitsubishi Lancer 7 Saloon 1.6 (CS3A) 105 hp Petrol
Article №: 686S0009
Details
-
- TecDoc Engine Number: 4G18
- Construction Year to: 02/2003, 03/2007
- Required quantity: 4
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
-50%
compared to RRP:
£ 4,00
£ 1,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0003
Details
-
- Construction Year to: 03/2007
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode, Unscrewable SAE connector
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
-46%
compared to RRP:
£ 3,70
£ 1,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0081
Details
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 4
- Electrode Gap [mm]: 1
- Spanner Size: 16 mm
- Spark Plug: Connector Type SAE, with gasket seat
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 4
- Tightening angle [degrees]: 90
- Condition: New
More
-36%
compared to RRP:
£ 8,70
£ 5,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0063
Details
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£ 7,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0071
Details
-
- Construction Year to: 03/2007
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£ 7,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0064
Details
-
- TecDoc Engine Number: 4G18
- Construction Year to: 02/2003, 03/2007
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£ 11,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0072
Details
-
- Construction Year to: 03/2007
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£ 11,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0326
Details
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Electrode Gap [mm]: 1
- Spanner Size: 16 mm
- Construction Year to: 02/2003
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 4
- Tightening angle [degrees]: 90
- Condition: New
More
£ 21,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0317
Details
-
- Construction Year to: 02/2003
- Fuel Type: CNG/LPG
- Replace after km: 30000
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 4
- Electrode Gap [mm]: 0,7
- Spanner Size: 16 mm
- Thread Pitch [mm]: 1,25
- Connector type: SAE/M4
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£ 21,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990008
Details
-
- TecDoc Engine Number: 4G18
- Construction Year to: 02/2003, 03/2007
- Required quantity: 4
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
-50%
compared to RRP:
£ 4,00
£ 1,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990002
Details
-
- Construction Year to: 03/2007
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode, Unscrewable SAE connector
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
-46%
compared to RRP:
£ 3,70
£ 1,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0009P
Details
-
- TecDoc Engine Number: 4G18
- Construction Year to: 02/2003, 03/2007
- Required quantity: 4
- Product line: Nickel
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Spark Plug: Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Resistor [kOhm]: 6
- Spark Plug Head: Fixed SAE connector
- Condition: New
More
£ 2,74
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0003P
Details
-
- Construction Year to: 03/2007
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Product line: Nickel
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Spark Plug: Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Number of pins: 1
- Resistor [kOhm]: 6
- Spark Plug Head: Fixed SAE connector
- Condition: New
More
£ 2,90
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 229 660
FR 8 DCX+, Blister N23 - FR 8 DCX
Details
-
- TecDoc Engine Number: 4G18
- Construction Year to: 02/2003
- for OE number: MS851357
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£ 3,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 235 667
FR 7 DCX+, Blister N06 - FR 7 DCX
Details
-
- TecDoc Engine Number: 4G18
- Construction Year to: 02/2003, 03/2007
- for OE number: MS851727
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£ 3,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 240 593
FR 6 D+, Blister N12 - FR 6 DC
Details
-
- Construction Year to: 03/2007
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£ 3,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: OE063/T10
RC10YC4, OE063
Details
- Product line: Powersport
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, with gasket seat, Copper Centre Electrode
- Thread Size: M14x1.25
- Connector type: SAE
- Required quantity: 4
- Packing Type: Box
- Quality/ Grade: Nickel GE
- Technical Information Number: RC10YC4
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8,65
- Packaging width [cm]: 2,45
- Packaging height [cm]: 2,45
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 7,5
- Projection [mm]: 1,5
- Condition: New
More
-29%
compared to RRP:
£ 5,63
£ 3,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCF860004
Details
-
- TecDoc Engine Number: 4G18
- Construction Year to: 02/2003, 03/2007
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£ 4,43
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 232 502
FR 78 X
Details
-
- Construction Year to: 03/2007
- Required quantity: 4
- Supplementary Info: Super 4
- Thread Length [mm]: 19
- Spark Position [mm]: 5
- Electrode Gap [mm]: 1
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 4
- Condition: New
More
£ 5,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V99-75-1020
Details
- Supplementary Info: Q+, original equipment manufacturer quality
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,7
- Spanner Size: 21
- Spark Plug: 1 - Earthed Electrode
- Construction Year to: 02/2003
- Thread Size: M 14 x 1,25
- Vehicle Equipment: for vehicles with gas operation
- Condition: New
More
-62%
compared to RRP:
£ 17,23
£ 6,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 236 616
6724, FR 7 DPP 30 X
Details
-
- Construction Year to: 03/2007
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£ 6,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V99-75-0013
Details
-
- Construction Year to: 02/2003
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Product line: Q+, original equipment manufacturer quality
- Electrode Gap [mm]: 0,8
- Spark Plug: 3 - Earthed Electrode
- Weight [kg]: 0,052
- Packaging width [cm]: 8,5
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Condition: New
More
£ 7,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990062
Details
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£ 7,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990070
Details
-
- Construction Year to: 03/2007
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£ 7,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCF860032
Details
-
- TecDoc Engine Number: 4G18
- Construction Year to: 02/2003, 03/2007
- Fuel Type: CNG/LPG
- Replace after km: 30000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 4
- Electrode Gap [mm]: 0,7
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£ 18,83
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 34 products
