Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
-
Propshafts and differentials
- Automatic transmission fluid MITSUBISHI Lancer IV Saloon (C6_A, C7_A) 1.3GL (C61A) 68 hp Petrol
- Gearbox oil and transmission fluid MITSUBISHI Lancer IV Saloon (C6_A, C7_A) 1.3GL (C61A) 68 hp Petrol
- Differential seal MITSUBISHI Lancer IV Saloon (C6_A, C7_A) 1.3GL (C61A) 68 hp Petrol
- Differential parts MITSUBISHI Lancer IV Saloon (C6_A, C7_A) 1.3GL (C61A) 68 hp Petrol
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Wiper and washer system
Differential seal MITSUBISHI Lancer IV Saloon (C6_A, C7_A) 1.3 GL (C61A) 68 hp Petrol
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
MITSUBISHI Lancer IV Saloon (C6_A, C7_A) 1.3 GL (C61A) year of manufacture 1988, 68 hp vehicle parts products
incl. 20% VAT, excl. delivery costs
- Transmission Code: AT, MT
- Thickness [mm]: 9
- Inner Diameter [mm]: 35
- Packaging length [cm]: 5,6
- Packaging width [cm]: 5,6
- Packaging height [cm]: 1,5
- Diameter [mm]: 56
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Dust Cover: with dust lip
- Height 1 [mm]: 10
- Height 2 [mm]: 13,5
- Inner Diameter [mm]: 35
- Diameter [mm]: 56
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Height 1 [mm]: 7
- Material: ACM (Polyacrylate)
- Inner Diameter 2 [mm]: 28
- Swirl Type: Right-hand Twist
- Dust Cover: with dust lip
- Diameter [mm]: 56
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Inner Diameter [mm]: 33
- Height [mm]: 8
- Height 2 [mm]: 13
- Radial Shaft Seal Design: A/BS
- Swirl Type: Right-hand Twist
- Material: ACM (Polyacrylate)
- Dust Cover: with dust lip
- Diameter [mm]: 55
- Goods tariff number: 8484200000
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Height [mm]: 12
- Inner Diameter [mm]: 45
- Thickness [mm]: 19,5
- Material: NBR (nitrile butadiene rubber)
- Radial Shaft Seal Design: 822S
- Diameter [mm]: 72
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Height 1 [mm]: 12,5
- Material: NBR (nitrile butadiene rubber)
- Inner Diameter 2 [mm]: 37
- Diameter [mm]: 62
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Height 1 [mm]: 12
- Material: ACM (Polyacrylate)
- Inner Diameter 2 [mm]: 42
- Diameter [mm]: 65
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: front propshaft at transfer case
- Transmission Type: Manual Transmission
- Fabrication Number: NUP-MS-000
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Height 1 [mm]: 12
- Material: ACM (Polyacrylate)
- Inner Diameter 2 [mm]: 32
- Diameter [mm]: 65
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: transmission sided
- Weight [kg]: 0,0336
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Height 1 [mm]: 12
- Material: ACM (Polyacrylate)
- Inner Diameter 2 [mm]: 45
- Diameter [mm]: 72
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Drive Axle
- Height 1 [mm]: 12,5
- Inner Diameter 2 [mm]: 37
- Material: NBR (nitrile butadiene rubber)
- Diameter [mm]: 62
- Condition: New
Over 100 in stock
