Car part
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
-
Electrics
- Window regulator Mitsubishi L200 K74 3.0 4WD (K76T) 181 hp Petrol
- Alternator parts Mitsubishi L200 K74 3.0 4WD (K76T) 181 hp Petrol
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Interior
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Alternator parts Mitsubishi L200 K74 3.0 4WD (K76T) 181 hp Petrol
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
MITSUBISHI L 200 Platform/Chassis (K6_T, K7_T) 3.0 4WD (K76T) year of manufacture 1996, 181 hp vehicle parts products
incl. 20% VAT, excl. delivery costs
- for manufacturer number: F-236591.05/.07
- Number of grooves: 6
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting
- Observe service information
- Distance to first groove [mm]: 12,9
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 55,8
- Width [mm]: 41,2
- Thread Size: M16
- Number of grooves: 6
- Depth [mm]: 11,1
- Bore Diameter [mm]: 17
- Bolt Head-/Nut Design: Torx
- Rotation Direction: Clockwise rotation
- Weight [kg]: 0,56
- Distance to first groove [mm]: 14,6
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Article number of the recommended special tool: GAT4955B
- Number of grooves: 6
- Diameter [mm]: 61
- Inner Diameter [mm]: 17
- Width [mm]: 40
- Supplementary Info: Micro-V® UNIQUE FIT
- Product line: DriveAlign
- OE recommends exchanging the entire kit
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Weight [kg]: 0,542
- Packaging width [cm]: 9
- Packaging length [cm]: 11
- Packaging height [cm]: 6
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting
- Width [mm]: 42,4
- Diameter [mm]: 61,0/17,0
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Number of grooves: 6
- Thread Size: M16x1,5
- Length [mm]: 11,70
- Quality: PREMIUM LINE
- New part without deposit
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Distance from belt pulley to alternator [mm]: 15
- Diameter [mm]: 61
- Fitting Depth [mm]: 11,1
- for manufacturer number: F-227628.XX, F-553470.XX
- Manufacturer Restriction: Hitachi, Bosch, Valeo
- Width [mm]: 42,8
- Thread Size: M16x1,5
- Inner Diameter [mm]: 17
- Belt Pulley Ø [mm]: 56
- Rotation Direction: Clockwise rotation
- Supplementary Article / Supplementary Info Info 2: with cap
- Number of grooves: 6
- Assy./disassy. by qualified personnel required!
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- for OE number: 16 068 569 80
- Width [mm]: 38
- Diameter [mm]: 59
- Number of Teeth: 33
- for manufacturer number: F-236591.04, F-236591.06
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- for OE number: 12 04 178
- Width [mm]: 40
- Diameter [mm]: 59
- Number of Teeth: 33
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- for manufacturer number: F-556014.XX
- Number of grooves: 6
- Width [mm]: 39,8
- Diameter [mm]: 53,8/17,0
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting
- Distance to first groove [mm]: 16,3
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Article number of the recommended special tool: GAT4955B
- Number of grooves: 6
- Diameter [mm]: 59
- Inner Diameter [mm]: 17
- Width [mm]: 38
- Supplementary Info: Micro-V® UNIQUE FIT
- Product line: DriveAlign
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 61
- Width [mm]: 40,7
- Thread Size: M16
- Number of grooves: 6
- Depth [mm]: 16
- Bore Diameter [mm]: 17
- Bolt Head-/Nut Design: Torx
- Rotation Direction: Clockwise rotation
- Weight [kg]: 0,55
- Distance to first groove [mm]: 10,7
- Condition: New
Over 100 in stock
