Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs Mitsubishi Galant 5 E50 2.5 V6-24 4WD (E88A) 170 hp Petrol
- Brake pads Mitsubishi Galant 5 E50 2.5 V6-24 4WD (E88A) 170 hp Petrol
- Brake caliper Mitsubishi Galant 5 E50 2.5 V6-24 4WD (E88A) 170 hp Petrol
- Drum brake Mitsubishi Galant 5 E50 2.5 V6-24 4WD (E88A) 170 hp Petrol
- ABS sensor Mitsubishi Galant 5 E50 2.5 V6-24 4WD (E88A) 170 hp Petrol
- Brake caliper repair kit Mitsubishi Galant 5 E50 2.5 V6-24 4WD (E88A) 170 hp Petrol
- Handbrake Mitsubishi Galant 5 E50 2.5 V6-24 4WD (E88A) 170 hp Petrol
- Brake caliper carrier Mitsubishi Galant 5 E50 2.5 V6-24 4WD (E88A) 170 hp Petrol
- Brake shoes Mitsubishi Galant 5 E50 2.5 V6-24 4WD (E88A) 170 hp Petrol
- Brake hose Mitsubishi Galant 5 E50 2.5 V6-24 4WD (E88A) 170 hp Petrol
- Brake drum GALANT 2.5 V6-24 4WD (E88A) 170 hp Petrol
- Master cylinder GALANT 2.5 V6-24 4WD (E88A) 170 hp Petrol
- Handbrake cable GALANT 2.5 V6-24 4WD (E88A) 170 hp Petrol
- Guide sleeve kit, brake caliper GALANT 2.5 V6-24 4WD (E88A) 170 hp Petrol
- Brake fluid GALANT 2.5 V6-24 4WD (E88A) 170 hp Petrol
- Handbrake shoes GALANT 2.5 V6-24 4WD (E88A) 170 hp Petrol
- Brake pad fitting kit GALANT 2.5 V6-24 4WD (E88A) 170 hp Petrol
- Accessory kit, brake shoes GALANT 2.5 V6-24 4WD (E88A) 170 hp Petrol
- Brake pads and discs GALANT 2.5 V6-24 4WD (E88A) 170 hp Petrol
- Brake light switch GALANT 2.5 V6-24 4WD (E88A) 170 hp Petrol
- Abs ring GALANT 2.5 V6-24 4WD (E88A) 170 hp Petrol
- Brake caliper piston GALANT 2.5 V6-24 4WD (E88A) 170 hp Petrol
- Master cylinder repair kit GALANT 2.5 V6-24 4WD (E88A) 170 hp Petrol
- High-performance brake pads GALANT 2.5 V6-24 4WD (E88A) 170 hp Petrol
- Repair kit, wheel brake cylinder GALANT 2.5 V6-24 4WD (E88A) 170 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs Mitsubishi Galant 5 E50 2.5 V6-24 4WD 170 hp Petrol

Article №: 82B0295
Details
- Fitting Position: Front Axle
- Diameter [mm]: 276
- Brake Disc Type: Vented
- Number of Holes: 4/8
- Wheel Bolt Bore Diameter [mm]: 12,7
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 69,1
- Height [mm]: 45,3
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-47%
compared to RRP:
£55,00
£28,97
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 6054230
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 262
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness [mm]: 10
- Production Number: K6054230
- Condition: New
More
£20,23
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 561926CH
Details
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22,4
- Centering Diameter [mm]: 69
- Height [mm]: 45,5
- Weight [kg]: 10,52
- Tightening Torque [Nm]: 100
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packing Type: Box
- Packaging length [cm]: 26,5
- Packaging width [cm]: 27
- Packaging height [cm]: 11,5, 9,5
- Drilled: no
- Condition: New
More
-73%
compared to RRP:
£91,64
£24,37
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 561926JC
Details
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22,4
- Centering Diameter [mm]: 69
- Height [mm]: 45,5
- Weight [kg]: 10,52
- Surface: Coated
- Tightening Torque [Nm]: 100
- Version: JC
- Test Mark: R90 Homologated
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packing Type: Box
- Packaging width [cm]: 28
- Packaging height [cm]: 11
- Drilled: no
- Condition: New
More
£24,37
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: DDF885C
Details
- Product line: PREMIER
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Number of Holes: 4
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22,4
- Centering Diameter [mm]: 69
- Height [mm]: 45,5
- Weight [kg]: 5,26
- Surface: Coated
- Tightening Torque [Nm]: 100
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packaging length [cm]: 25,5
- Packaging width [cm]: 25,5
- Packaging height [cm]: 8,5
- Drilled: no
- Condition: New
More
£25,75
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: BG3810
Details
-
- Fitting Position: Front Axle
- Construction Year from: 05/1996
- Diameter [mm]: 276
- Brake Disc Type: Vented
- Number of Holes: 4
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22,4
- Centering Diameter [mm]: 69
- Height [mm]: 45,1
- Surface: Oiled
- Test Mark: E1 90R-02C0074/1560
- Drilled: no
- Condition: New
More
£28,05
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 5010-2006
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 262
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,4
- Centering Diameter [mm]: 90
- Height [mm]: 60
- Drilled: no
- Condition: New
More
£29,43
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 3963200100
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 262
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness [mm]: 10
- Surface: Coated
- Drilled: no
- Condition: New
More
-27%
compared to RRP:
£40,36
£29,43
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 6394.10
Details
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Number of Holes: 4
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22,4
- Centering Diameter [mm]: 69
- Height [mm]: 45,1
- Weight [kg]: 4,63
- Test Mark: K.B.A.: 61209
- Drilled: no
- Condition: New
More
£30,35
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 08.8316.11
Details
- Product line: Prime
- Fitting Position: Rear Axle
- Diameter [mm]: 262
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,4
- Centering Diameter [mm]: 90
- Height [mm]: 60
- Surface: Coated
- Tightening Torque [Nm]: 100
- Drilled: no
- Condition: New
More
£30,35
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 8DD 355 107-331
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 262
- Brake Disc Type: solid
- Hole Arrangement/Number: 04/07
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,4
- Centering Diameter [mm]: 90
- Inner Diameter [mm]: 168
- Height [mm]: 60,1
- Weight [kg]: 4,1
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
-66%
compared to RRP:
£94,39
£31,73
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 0 986 479 140
Details
-
- Construction Year to: 05/1996
- Fitting Position: Front Axle
- Diameter [mm]: 276
- Brake Disc Type: Vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22,4
- Centering Diameter [mm]: 69
- Height [mm]: 45,2
- Surface: Oiled
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 12,6
- Drilled: no
- Condition: New
More
£32,19
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 23-0653
Details
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Number of Holes: 6
- Bolt Hole Circle Ø [mm]: 69,0
- Brake Disc Thickness [mm]: 24,0
- Height [mm]: 45,3
- Test Mark: ECE-R90
- Drilled: no
- Condition: New
More
£32,65
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 92104000
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 262
- Brake Disc Type: solid
- Hole Arrangement/Number: 04/07
- Wheel Bolt Bore Diameter [mm]: 12,7
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,4
- Centering Diameter [mm]: 90
- Inner Diameter [mm]: 168
- Height [mm]: 60,1
- Weight [kg]: 4,1
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 27,8
- Packaging width [cm]: 27,8
- Packaging height [cm]: 15,5
- Drilled: no
- Condition: New
More
-60%
compared to RRP:
£84,20
£33,57
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 6838.00
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 262
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,4
- Centering Diameter [mm]: 90
- Height [mm]: 60,1
- Weight [kg]: 4,08
- Test Mark: K.B.A.: 61210
- Drilled: no
- Condition: New
More
£34,95
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: DF4345
Details
- Fitting Position: Front Axle
- Diameter [mm]: 276
- Brake Disc Type: Vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22,4
- Centering Diameter [mm]: 69
- Height [mm]: 45
- Surface: Painted
- Thread Size: 12,5
- Colour: black
- Test Mark: E1 90R-02 C0176/0673
- Drilled: no
- Condition: New
More
-67%
compared to RRP:
£108,58
£35,41
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 6838.00
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 262
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,4
- Centering Diameter [mm]: 90
- Height [mm]: 60,1
- Weight [kg]: 4,08
- Test Mark: K.B.A.: 61210
- Drilled: no
- Condition: New
More
£35,87
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 60522C
Details
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Number of bores: 4
- Bolt Hole Circle Ø [mm]: 69
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22,4
- Height [mm]: 45,5
- Surface: Painted
- Tightening Torque [Nm]: 100
- Test Mark: ECE R90 APPROVED
- for OE number: 51712M2000
- Drilled: no
- Condition: New
More
£36,33
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 16669
Details
- Fitting Position: Front Axle
- Diameter [mm]: 276
- Brake Disc Type: Vented
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 69
- Hub Diameter [mm]: 156
- Height [mm]: 45,2
- Weight [kg]: 6,07
- Surface: Coated
- Drilled: no
- Condition: New
More
-62%
compared to RRP:
£103,81
£38,63
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 92110500
Details
- Fitting Position: Front Axle
- Diameter [mm]: 276
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 04/08
- Wheel Bolt Bore Diameter [mm]: 12,6
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22,4
- Centering Diameter [mm]: 69
- Inner Diameter [mm]: 145,2
- Height [mm]: 45
- Weight [kg]: 6
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 29,3
- Packaging width [cm]: 29,3
- Packaging height [cm]: 10,5
- Drilled: no
- Condition: New
More
-60%
compared to RRP:
£97,96
£39,09
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 60-05-522C
Details
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Number of bores: 4
- Bolt Hole Circle Ø [mm]: 69
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22,4
- Height [mm]: 45,5
- Surface: Painted
- Tightening Torque [Nm]: 100
- Test Mark: ECE R90 APPROVED
- for OE number: 51712M2000
- Drilled: no
- Condition: New
More
£40,01
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 563610J
Details
-
- Fitting Position: Front Axle
- Construction Year from: 05/1996
- Diameter [mm]: 276
- Brake Disc Type: Vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22,4
- Centering Diameter [mm]: 69
- Height [mm]: 45,2
- Weight [kg]: 12,39
- Surface: Oiled
- Number of mounting bores: 4
- Version: J
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packing Type: Box
- Packaging width [cm]: 28,5
- Packaging height [cm]: 9
- Condition: New
More
£42,77
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 203032
Details
-
- Fitting Position: Front Axle
- Construction Year from: 05/1996
- Diameter [mm]: 276
- Brake Disc Type: Vented
- Rim Hole Number: 4
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22,4
- Centering Diameter [mm]: 69
- Height [mm]: 45
- Surface: Oiled
- Net weight [kg]: 6,07
- Drilled: no
- Condition: New
More
£51,05
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 23-1066C
Details
-
- Construction Year from: 05/1996
- Fitting Position: Front Axle
- Diameter [mm]: 276,0
- Brake Disc Type: Vented
- Number of Holes: 4
- Brake Disc Thickness [mm]: 24,0
- Centering Diameter [mm]: 69,0
- Height [mm]: 45
- Surface: Painted
- Test Mark: ECE-R90, ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£11,95
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: SKBD-0020300
Details
- Fitting Position: Front Axle
- Diameter [mm]: 276
- Brake Disc Type: Vented
- Number of Holes: 4/8
- Wheel Bolt Bore Diameter [mm]: 12,7
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 69,1
- Height [mm]: 45,3
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-44%
compared to RRP:
£55,00
£30,35
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Showing 25 out of 89 products
Show the next items
- 1
- 2
- 3
- 4