Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs FTO 2.0 (DE3A) 180 hp Petrol
- Brake pads FTO 2.0 (DE3A) 180 hp Petrol
- Brake caliper FTO 2.0 (DE3A) 180 hp Petrol
- Brake caliper repair kit FTO 2.0 (DE3A) 180 hp Petrol
- Handbrake FTO 2.0 (DE3A) 180 hp Petrol
- Brake hose FTO 2.0 (DE3A) 180 hp Petrol
- Handbrake cable FTO 2.0 (DE3A) 180 hp Petrol
- Guide sleeve kit, brake caliper FTO 2.0 (DE3A) 180 hp Petrol
- Brake fluid FTO 2.0 (DE3A) 180 hp Petrol
- Brake pad fitting kit FTO 2.0 (DE3A) 180 hp Petrol
- Brake pads and discs FTO 2.0 (DE3A) 180 hp Petrol
- Brake caliper piston FTO 2.0 (DE3A) 180 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Ignition and preheating
- Interior
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Wiper and washer system
Brake discs FTO 2.0 (DE3A) 180 hp Petrol
Article №: 82B0223
Details
- Fitting Position: Front Axle
- Diameter: 255,8
- Brake Disc Type: Vented
- Number of Holes: 4/6
- Wheel Bolt Bore Diameter [mm]: 12,6
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness: 24
- Centering Diameter [mm]: 69
- Height [mm]: 45,5
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-44%
compared to RRP:
£37,60
£20,85
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0546
Details
- Fitting Position: Front Axle
- Diameter: 256
- Brake Disc Type: Vented
- Number of Holes: 4/8
- Wheel Bolt Bore Diameter [mm]: 12,7
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness: 24
- Centering Diameter [mm]: 69
- Height [mm]: 45,3
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-60%
compared to RRP:
£54,50
£21,33
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0089
Details
- Fitting Position: Rear Axle
- Diameter: 261,9
- Brake Disc Type: solid
- Number of Holes: 4/7
- Wheel Bolt Bore Diameter [mm]: 12,7
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness: 10
- Centering Diameter [mm]: 90
- Height [mm]: 60,1
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-44%
compared to RRP:
£39,50
£21,82
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBD-0020227
Details
- Fitting Position: Front Axle
- Diameter: 255,8
- Brake Disc Type: Vented
- Number of Holes: 4/6
- Wheel Bolt Bore Diameter [mm]: 12,6
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness: 24
- Centering Diameter [mm]: 69
- Height [mm]: 45,5
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-44%
compared to RRP:
£37,59
£20,85
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBD-0022317
Details
- Fitting Position: Front Axle
- Diameter: 256
- Brake Disc Type: Vented
- Number of Holes: 4/8
- Wheel Bolt Bore Diameter [mm]: 12,7
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness: 24
- Centering Diameter [mm]: 69
- Height [mm]: 45,3
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-60%
compared to RRP:
£54,50
£21,33
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBD-0020091
Details
- Fitting Position: Rear Axle
- Diameter: 261,9
- Brake Disc Type: solid
- Number of Holes: 4/7
- Wheel Bolt Bore Diameter [mm]: 12,7
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness: 10
- Centering Diameter [mm]: 90
- Height [mm]: 60,1
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-44%
compared to RRP:
£39,50
£21,82
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8DD 355 107-321
Details
- Fitting Position: Front Axle
- Diameter: 256
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 04/08
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness: 24
- Minimum thickness [mm]: 22,4
- Centering Diameter [mm]: 69
- Height [mm]: 45,3
- Weight [kg]: 4,9
- Technical Information Number: 50303
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
£25,21
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADC44359
Details
- Fitting Position: Rear Axle
- Diameter: 260
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 114
- Thickness [mm]: 41
- Brake Disc Thickness: 10,2
- Minimum thickness [mm]: 8,4
- Centering Diameter [mm]: 90
- Surface: Coated
- Number of mounting bores: 2
- Observe service information
- Drilled: no
- Condition: New
More
£25,21
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0223P
Details
- Fitting Position: Front Axle
- Diameter: 255,8
- Brake Disc Type: Vented
- Number of Holes: 4/6
- Wheel Bolt Bore Diameter [mm]: 12,6
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness: 24
- Centering Diameter [mm]: 69
- Height [mm]: 45,5
- Surface: Coated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£26,60
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6838.00
Details
- Fitting Position: Rear Axle
- Diameter: 262
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness: 10
- Minimum thickness [mm]: 8,4
- Centering Diameter [mm]: 90
- Height [mm]: 60,1
- Weight [kg]: 4,08
- Test Mark: K.B.A.: 61210
- Drilled: no
- Condition: New
More
£27,15
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DF4081
Details
- Fitting Position: Front Axle
- Diameter: 256
- Brake Disc Type: Vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness: 24
- Minimum thickness [mm]: 22,4
- Centering Diameter [mm]: 69
- Height [mm]: 45,8
- Surface: Painted
- Thread Size: 12.6
- Colour: black
- Test Mark: E1 90R-02 C0176/0706
- Drilled: no
- Condition: New
More
-72%
compared to RRP:
£101,03
£28,12
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADC44351
Details
- Fitting Position: Front Axle
- Diameter: 256
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 114
- Thickness [mm]: 46
- Brake Disc Thickness: 24
- Minimum thickness [mm]: 22,4
- Centering Diameter [mm]: 69
- Surface: Coated
- Number of mounting bores: 5
- Observe service information
- Drilled: no
- Condition: New
More
-73%
compared to RRP:
£107,98
£29,09
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6394.10
Details
- Fitting Position: Front Axle
- Diameter: 256
- Brake Disc Type: Vented
- Number of Holes: 4
- Brake Disc Thickness: 24
- Minimum thickness [mm]: 22,4
- Centering Diameter [mm]: 69
- Height [mm]: 45,1
- Weight [kg]: 4,63
- Test Mark: K.B.A.: 61209
- Drilled: no
- Condition: New
More
£29,58
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-2557
Details
- Fitting Position: Rear Axle
- Diameter: 262
- Brake Disc Type: solid
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 114
- Brake Disc Thickness: 10
- Minimum thickness [mm]: 8,4
- Centering Diameter [mm]: 90
- Height [mm]: 60,1
- Surface: Painted
- Drum diameter [mm]: 167
- Drilled: no
- Condition: New
More
£31,03
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-0731
Details
- Fitting Position: Front Axle
- Diameter: 256
- Brake Disc Type: internally vented
- Bolt Hole Circle Ø [mm]: 114
- Brake Disc Thickness: 24
- Minimum thickness [mm]: 22,4
- Centering Diameter [mm]: 69
- Height [mm]: 45,3
- Surface: Painted
- Technical Information Number: 98200 1039 0 1 PRO
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Packaging length [cm]: 30
- Packaging width [cm]: 28,5
- Packaging height [cm]: 10
- Drilled: no
- Condition: New
More
£32,00
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: QD6148
Details
- Fitting Position: Front Axle
- Diameter: 256
- Brake Disc Type: internally vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 114
- Brake Disc Thickness: 24
- Minimum thickness [mm]: 22,4
- Centering Diameter [mm]: 69
- Height [mm]: 45,3
- Surface: Painted, Coated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Packaging length [cm]: 30
- Packaging width [cm]: 28,5
- Packaging height [cm]: 10
- Drilled: no
- Condition: New
More
£32,97
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8DD 355 107-331
Details
-
- Fitting Position: Rear Axle
- Rim Hole Number: 4
- Diameter: 262
- Brake Disc Type: solid
- Hole Arrangement/Number: 04/07
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness: 10
- Minimum thickness [mm]: 8,4
- Centering Diameter [mm]: 90
- Inner Diameter [mm]: 168
- Height [mm]: 60,1
- Weight [kg]: 4,1
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
-65%
compared to RRP:
£94,39
£32,97
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DF4193
Details
- Fitting Position: Rear Axle
- Diameter: 262
- Brake Disc Type: solid
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness: 10
- Minimum thickness [mm]: 8,4
- Centering Diameter [mm]: 90
- Height [mm]: 60,1
- Surface: Painted
- Thread Size: 12,6
- Colour: black
- Test Mark: E1 90R-02 C0204/0283
- Drum diameter [mm]: 167
- Drilled: no
- Condition: New
More
-60%
compared to RRP:
£89,78
£35,40
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6394.11
Details
- Fitting Position: Front Axle
- Diameter: 256
- Brake Disc Type: Vented
- Number of Holes: 4
- Brake Disc Thickness: 24
- Minimum thickness [mm]: 22,4
- Centering Diameter [mm]: 69
- Height [mm]: 45,5
- Weight [kg]: 5
- Test Mark: K.B.A.: 61209
- Drilled: no
- Condition: New
More
£35,88
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 986 479 035
Details
-
- Construction Year to: 07/2000
- Fitting Position: Front Axle
- Diameter: 276
- Brake Disc Type: Vented, internally vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness: 24,1
- Minimum thickness [mm]: 22,4
- Centering Diameter [mm]: 69
- Height [mm]: 45,2
- Surface: Oiled
- Bore Diameter up to [mm]: 12,8
- Drilled: no
- Condition: New
More
£36,37
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 92103903
Details
- Product line: PRO
- Fitting Position: Front Axle
- Diameter: 256
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 04/08
- Wheel Bolt Bore Diameter [mm]: 12,7
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness: 24
- Minimum thickness [mm]: 22,4
- Centering Diameter [mm]: 69
- Inner Diameter [mm]: 145,2
- Height [mm]: 45,3
- Weight [kg]: 4,9
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 27,8
- Packaging width [cm]: 27,8
- Packaging height [cm]: 12,2
- Drilled: no
- Condition: New
More
-56%
compared to RRP:
£84,10
£36,85
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 92104000
Details
-
- Fitting Position: Rear Axle
- Rim Hole Number: 4
- Diameter: 262
- Brake Disc Type: solid
- Hole Arrangement/Number: 04/07
- Wheel Bolt Bore Diameter [mm]: 12,7
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness: 10
- Minimum thickness [mm]: 8,4
- Centering Diameter [mm]: 90
- Inner Diameter [mm]: 168
- Height [mm]: 60,1
- Weight [kg]: 4,1
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 27,8
- Packaging width [cm]: 27,8
- Packaging height [cm]: 15,5
- Drilled: no
- Condition: New
More
-55%
compared to RRP:
£84,20
£37,82
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCH20291
Details
- Fitting Position: Front Axle
- Diameter: 255,8
- Brake Disc Type: Vented
- Number of Holes: 4/6
- Wheel Bolt Bore Diameter [mm]: 12,6
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness: 24
- Centering Diameter [mm]: 69
- Height [mm]: 45,5
- Surface: Coated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£66,82
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3963200100
Details
- Fitting Position: Rear Axle
- Diameter: 262
- Brake Disc Type: solid
- Number of Holes: 4
- Rim Hole Number: 4
- Brake Disc Thickness: 10
- Surface: Coated
- Drilled: no
- Condition: New
More
-44%
compared to RRP:
£40,36
£22,30
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 19-0731MAX
Details
- Product line: MAX
- Fitting Position: Front Axle
- Diameter: 256
- Brake Disc Type: internally vented
- Bolt Hole Circle Ø [mm]: 114
- Brake Disc Thickness: 24
- Minimum thickness [mm]: 22,4
- Centering Diameter [mm]: 69
- Height [mm]: 45,3
- Surface: Painted, Coated
- Technical Information Number: 98200 1039 0 1 PRO
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Packaging length [cm]: 30
- Packaging width [cm]: 28,5
- Packaging height [cm]: 10
- Drilled: no
- Condition: New
More
£26,18
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Showing 25 out of 49 products
