Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
-
Electrics
- Lambda sensor Delica 2.4 All-wheel Drive (PD4W) 132 hp Petrol
- Alternator Delica 2.4 All-wheel Drive (PD4W) 132 hp Petrol
- Battery Delica 2.4 All-wheel Drive (PD4W) 132 hp Petrol
- Starter motor Delica 2.4 All-wheel Drive (PD4W) 132 hp Petrol
- Mass air flow sensor (MAF) Delica 2.4 All-wheel Drive (PD4W) 132 hp Petrol
- ABS sensor Delica 2.4 All-wheel Drive (PD4W) 132 hp Petrol
- Alternator parts Delica 2.4 All-wheel Drive (PD4W) 132 hp Petrol
- Coolant temperature sensor Delica 2.4 All-wheel Drive (PD4W) 132 hp Petrol
- Oil pressure sensor Delica 2.4 All-wheel Drive (PD4W) 132 hp Petrol
- Brake light switch Delica 2.4 All-wheel Drive (PD4W) 132 hp Petrol
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Ignition and preheating
- Interior
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Wiper and washer system
Alternator parts Delica 2.4 All-wheel Drive (PD4W) 132 hp Petrol
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
MITSUBISHI Delica / Space Gear MPV 2.4 All-wheel Drive (PD4W) year of manufacture 1995, 132 hp vehicle parts products
incl. 20% VAT, excl. delivery costs
- for manufacturer number: F-236591.05/.07
- Number of grooves: 6
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting
- Observe service information
- Distance to first groove [mm]: 12,9
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 55,8
- Width [mm]: 41,2
- Thread Size: M16
- Number of grooves: 6
- Depth [mm]: 11,1
- Bore Diameter [mm]: 17
- Bolt Head-/Nut Design: Torx
- Rotation Direction: Clockwise rotation
- Weight [kg]: 0,56
- Distance to first groove [mm]: 14,6
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Article number of the recommended special tool: GAT4955B
- Number of grooves: 6
- Diameter [mm]: 61
- Inner Diameter [mm]: 17
- Width [mm]: 40
- Supplementary Info: Micro-V® UNIQUE FIT
- Product line: DriveAlign
- OE recommends exchanging the entire kit
- Condition: New
Over 100 in stock
-51%
compared to RRP:
£64,82
incl. 20% VAT, excl. delivery costs
- Weight [kg]: 0,542
- Packaging width [cm]: 9
- Packaging length [cm]: 11
- Packaging height [cm]: 6
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting
- Width [mm]: 42,4
- Diameter [mm]: 61,0/17,0
- Condition: New
Over 100 in stock
-19%
compared to RRP:
£34,78
incl. 20% VAT, excl. delivery costs
- Number of grooves: 6
- Thread Size: M16x1,5
- Length [mm]: 11,70
- Quality: PREMIUM LINE
- New part without deposit
- Condition: New
Over 100 in stock
-33%
compared to RRP:
£47,41
incl. 20% VAT, excl. delivery costs
- Distance from belt pulley to alternator [mm]: 15
- Diameter [mm]: 61
- Fitting Depth [mm]: 11,1
- for manufacturer number: F-227628.XX, F-553470.XX
- Manufacturer Restriction: Hitachi, Bosch, Valeo
- Width [mm]: 42,8
- Thread Size: M16x1,5
- Inner Diameter [mm]: 17
- Belt Pulley Ø [mm]: 56
- Rotation Direction: Clockwise rotation
- Supplementary Article / Supplementary Info Info 2: with cap
- Number of grooves: 6
- Assy./disassy. by qualified personnel required!
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- for OE number: 16 068 569 80
- Width [mm]: 38
- Diameter [mm]: 59
- Number of Teeth: 33
- for manufacturer number: F-236591.04, F-236591.06
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- for OE number: 12 04 178
- Width [mm]: 40
- Diameter [mm]: 59
- Number of Teeth: 33
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- for manufacturer number: F-556014.XX
- Number of grooves: 6
- Width [mm]: 39,8
- Diameter [mm]: 53,8/17,0
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting
- Distance to first groove [mm]: 16,3
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Article number of the recommended special tool: GAT4955B
- Number of grooves: 6
- Diameter [mm]: 59
- Inner Diameter [mm]: 17
- Width [mm]: 38
- Supplementary Info: Micro-V® UNIQUE FIT
- Product line: DriveAlign
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 61
- Width [mm]: 40,7
- Thread Size: M16
- Number of grooves: 6
- Depth [mm]: 16
- Bore Diameter [mm]: 17
- Bolt Head-/Nut Design: Torx
- Rotation Direction: Clockwise rotation
- Weight [kg]: 0,55
- Distance to first groove [mm]: 10,7
- Condition: New
Over 100 in stock
