Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
-
Suspension
- Suspension arm MG ZR 160 160 hp Petrol
- Wheel hub MG ZR 160 160 hp Petrol
- Wheel bearing MG ZR 160 160 hp Petrol
- Top strut mount and bearing MG ZR 160 160 hp Petrol
- Anti-roll bar link MG ZR 160 160 hp Petrol
- Engine mount MG ZR 160 160 hp Petrol
- Track rod end MG ZR 160 160 hp Petrol
- Inner tie rod MG ZR 160 160 hp Petrol
- ABS sensor MG ZR 160 160 hp Petrol
- Suspension bushes MG ZR 160 160 hp Petrol
- Shock absorber dust cover and bump stops MG 160 160 hp Petrol
- Tyre pressure sensor (TPMS) MG 160 160 hp Petrol
- Anti-roll bar bushes MG 160 160 hp Petrol
- Axle bushes MG 160 160 hp Petrol
- Wheel spacers MG 160 160 hp Petrol
- Steering rack boot MG 160 160 hp Petrol
- Abs ring MG 160 160 hp Petrol
- Nut, stub axle MG 160 160 hp Petrol
- Subframe MG 160 160 hp Petrol
- Towbar / parts
- Wiper and washer system
Anti-roll bar bushes MG ZR 1.8 160 160 hp Petrol
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
MG MG ZR 160 year of manufacture 2001, 160 hp vehicle parts products
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front
- Length [mm]: 30
- Diameter [mm]: 30, 12
- Mounting Type: Rubber-Metal Mount
- Weight [kg]: 0,05
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Version: Road Series
- Fitting Position: Front axle both sides
- Material: PU (Polyurethane)
- Required quantity: 2
- Diameter [mm]: 21
- Mounting Type: Rubber-Metal Mount
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Thickness 1 [mm]: 44,5
- Inner Diameter 2 [mm]: 22
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: inner
- Inner Diameter [mm]: 20,5
- Length [mm]: 46
- Stabiliser Diameter [mm]: 21
- Required quantity: 2
- Mounting Type: Rubber Mount
- Weight [kg]: 0,065
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: inner
- Inner Diameter [mm]: 21
- Material: PU (Polyurethane)
- Length [mm]: 43
- Colour: red
- Weight [kg]: 0,04
- Supplementary Article / Supplementary Info Info 2: with grease cap
- Shore-A hardness value, base body: 80
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle
- Inner Diameter [mm]: 20
- Material: Rubber, Rubber with fabric lining
- Observe service information
- for OE number: 203 323 20 85
- Weight [kg]: 0,051
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Inner Diameter [mm]: 23
- Mounting Type: Rubber Mount
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Front Axle Left, Front Axle Right
- Inner Diameter [mm]: 21
- Required quantity: 1
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle
- Inner Diameter [mm]: 23
- Material: Rubber
- for OE number: 54612-9X201
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front axle both sides
- Inner Diameter [mm]: 34
- Packaging length [cm]: 8,8
- Packaging width [cm]: 5,7
- Packaging height [cm]: 5,1
- Nominal diameter [mm]: 34
- Condition: New
Over 100 in stock
