Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
-
Heating and ventilation
- Cabin filter Mercedes Vito W447 116CDI (447.601, 447.603, 447.605) 163 hp Diesel
- Blower motor Mercedes Vito W447 116CDI (447.601, 447.603, 447.605) 163 hp Diesel
- Heater matrix Mercedes Vito W447 116CDI (447.601, 447.603, 447.605) 163 hp Diesel
- Heater resistor Mercedes Vito W447 116CDI (447.601, 447.603, 447.605) 163 hp Diesel
- Auxiliary water pump Mercedes Vito W447 116CDI (447.601, 447.603, 447.605) 163 hp Diesel
- Heater control valve Mercedes Vito W447 116CDI (447.601, 447.603, 447.605) 163 hp Diesel
- Outside temperature sensor Mercedes Vito W447 116CDI (447.601, 447.603, 447.605) 163 hp Diesel
- Cooling fan relay Mercedes Vito W447 116CDI (447.601, 447.603, 447.605) 163 hp Diesel
- Interior temperature sensor Mercedes Vito W447 116CDI (447.601, 447.603, 447.605) 163 hp Diesel
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Heater matrix Mercedes Vito W447 116 CDI 2.2 (447.601, 447.603, 447.605) 163 hp Diesel
Article №: 707215
Details
-
- Fitting Position: Front
- Vehicle Equipment: for vehicles without electr. auxiliary heater
- Cooling fins material: Aluminium
- Core Depth [mm]: 32
- Core Length [mm]: 250
- Core Width [mm]: 154
- Inlet Ø [mm]: 18
- Outlet Ø [mm]: 18
- Radiator type: Brazed cooling fins
- Supplementary Article / Supplementary Info: with pipe
- Water Tank Material (radiator): Aluminium
- Condition: New
More
£52,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 707395
Details
-
- Vehicle Equipment: for vehicles with front and rear air conditioning
- Fitting Position: Rear
- Core Depth [mm]: 32
- Core Length [mm]: 180
- Core Width [mm]: 171
- Supplementary Article / Supplementary Info: without pipe
- Water Tank Material (radiator): Aluminium
- Condition: New
More
£65,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: AH 335 000P
Details
-
- Fitting Position: Front
- Vehicle Equipment: for vehicles without electr. auxiliary heater
- Cooling fins material: Aluminium
- Radiator type: Brazed cooling fins
- Water Tank Material (radiator): Aluminium
- Core Length [mm]: 250
- Core Width [mm]: 152
- Core Depth [mm]: 32
- Inlet Ø [mm]: 18
- Outlet Ø [mm]: 18
- Supplementary Article / Supplementary Info Info 2: with pipe
- Supplementary Article / Supplementary Info: with pipe
- for OE number: A0008304401
- Packaging height [cm]: 28,40
- Packaging width [cm]: 31,80
- Packaging length [cm]: 38,8
- Manufacturer: MAHLE
- Net Weight [g]: 800
- Condition: New
More
£86,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 02-2952
Details
- Cooling Hose: from heat exchanger to heater valve
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Colour: black
- Hose Length [mm]: 100
- Inner Diameter 2 [mm]: 15,5
- Observe broschure
- Condition: New
More
£1,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 02-3022
Details
- Cooling Hose: Output to Thermostat
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Colour: black
- Hose Length [mm]: 65
- Inner Diameter 2 [mm]: 38
- Observe broschure
- Condition: New
More
£4,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 02-2161
Details
-
- for OE number: A 651 200 14 82
- Cooling Hose: Heater Hose
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Colour: black
- Hose Length [mm]: 165
- Inner Diameter 2 [mm]: 17,5
- Observe broschure
- Condition: New
More
£6,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 02-3821
Details
- Cooling Hose: from engine to thermostat
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Colour: black
- Hose Length [mm]: 40
- Inner Diameter 2 [mm]: 18
- Observe broschure
- Condition: New
More
£10,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 30934
Details
- Inner Diameter [mm]: 16,0
- Length [m]: 20
- Suitable For (substance/mix/gas/chemicals): Antifreeze
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Supplementary Article / Supplementary Info: with reinforcement
- Certificate: SAEJ20R3
- Temperature range from [°C]: -40
- Temperature range to [°C]: +120
- Condition: New
More
Article №: FT61099
Details
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- not for emission standard: Euro 3
- Condition: New
More
£4,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 129032N
Details
-
- Fitting Position: Front
- Vehicle Equipment: for vehicles without electr. auxiliary heater
- Core Length [mm]: 250
- Core Width [mm]: 154
- Core Depth [mm]: 32
- Cooling fins material: Aluminium
- Water Tank Material (radiator): Aluminium
- Radiator type: Brazed cooling fins
- Inlet Ø [mm]: 18
- Outlet Ø [mm]: 18
- Supplementary Article / Supplementary Info Info 2: with pipe
- Weight [kg]: 1
- Packaging length [cm]: 46
- Packaging width [cm]: 44
- Packaging height [cm]: 16
- for OE number: 0008304401
- Condition: New
More
£73,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: R28729
Details
- Cooling Hose: from heat exchanger to heater valve
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Colour: black
- Hose Length [mm]: 100
- Inner Diameter 2 [mm]: 15,5
- Observe broschure
- Condition: New
More
£2,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: R28577
Details
- Cooling Hose: Output to Thermostat
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Colour: black
- Hose Length [mm]: 65
- Inner Diameter 2 [mm]: 38
- Observe broschure
- Condition: New
More
£3,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: R28509
Details
- for OE number: A 651 200 14 82
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Colour: black
- Hose Length [mm]: 165
- Inner Diameter 2 [mm]: 17,5
- Observe broschure
- Condition: New
More
£5,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: at24091
Details
- for OE number: 651 200 14 82
- Width [mm]: 17,5
- Height [mm]: 17,5
- Length [mm]: 165
- Weight [g]: 250
- Condition: New
More
£11,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 30932
Details
- Inner Diameter [mm]: 10
- Length [m]: 20
- Suitable For (substance/mix/gas/chemicals): Antifreeze
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Supplementary Article / Supplementary Info: with reinforcement
- Certificate: SAEJ20R3
- Temperature range from [°C]: -40
- Temperature range to [°C]: +120
- Condition: New
More
Article №: 30933
Details
- Inner Diameter [mm]: 13,0
- Length [m]: 20
- Suitable For (substance/mix/gas/chemicals): Antifreeze
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Supplementary Article / Supplementary Info: with reinforcement
- Certificate: SAEJ20R3
- Temperature range from [°C]: -40
- Temperature range to [°C]: +120
- Condition: New
More
Article №: 30935
Details
- Inner Diameter [mm]: 25,4
- Length [m]: 20
- Suitable For (substance/mix/gas/chemicals): Antifreeze
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Supplementary Article / Supplementary Info: with reinforcement
- Certificate: SAEJ20R3
- Temperature range from [°C]: -40
- Temperature range to [°C]: +120
- Condition: New
More
Article №: DWM169TT
Details
- Material: Rubber
- Fitting Position: Lower
- Length [mm]: 300
- Cooling Hose: from engine to engine cooler
- Inner Diameter [mm]: 41,0, 36,0, 14,0
- Condition: New
More
£2,75
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: BSG 60-720-269
Details
- Weight [g]: 40
- Quantity Unit: Packing Unit
- Material, 1st layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Material, 2nd layer: Polyester
- Material, 3rd layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Condition: New
More
