Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
-
Damping
- Shock absorber Mercedes Viano W639 3.7 (639.815) 231 hp Petrol
- Coil spring Mercedes Viano W639 3.7 (639.815) 231 hp Petrol
- Top strut mount and bearing Mercedes Viano W639 3.7 (639.815) 231 hp Petrol
- Suspension kit, coil springs Mercedes Viano W639 3.7 (639.815) 231 hp Petrol
- Shock absorber dust cover and bump stops Mercedes Viano W639 3.7 (639.815) 231 hp Petrol
- Air suspension Mercedes Viano W639 3.7 (639.815) 231 hp Petrol
- Boot, air suspension Mercedes Viano W639 3.7 (639.815) 231 hp Petrol
- Suspension kit, shock absorber and coil spring Mercedes Viano W639 3.7 (639.815) 231 hp Petrol
- Air suspension compressor Mercedes Viano W639 3.7 (639.815) 231 hp Petrol
- Repair kit, wheel suspension Mercedes Viano W639 3.7 (639.815) 231 hp Petrol
- Spring cap VIANO 3.7 (639.815) 231 hp Petrol
- Hydraulic oil VIANO 3.7 (639.815) 231 hp Petrol
- Camber bolts VIANO 3.7 (639.815) 231 hp Petrol
- Leaf spring VIANO 3.7 (639.815) 231 hp Petrol
- Mounting, shock absorbers VIANO 3.7 (639.815) 231 hp Petrol
- Relay, leveling control VIANO 3.7 (639.815) 231 hp Petrol
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Suspension kit, shock absorber and coil spring Mercedes Viano W639 3.7 (639.815) 231 hp Petrol
Article №: E90-25-014-01-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 30
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 30
-
- Vehicle Identification Number (VIN) to: 3603471
-
- Observe service information
- Registration Type: with certificate
- Shock Absorber Type: Gas Pressure
- Suspension: for vehicles without electronic suspension control
- Axle Load front axle to [kg]: 1550
- Axle Load rear axle to [kg]: 1550
- Condition: New
More
-35%
compared to RRP:
£1122,25
£728,02
incl. 20% VAT, excl. delivery costs
excl. bulky item surcharge
Not in stock
excl. bulky item surcharge
Details
Article №: E90-25-014-05-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 30
- Change the vehicle height through: Air suspension adjustment
- Component Number: AM25014010
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 30
-
- Vehicle Identification Number (VIN) to: 3603471
-
- Observe service information
- Registration Type: with certificate
- Shock Absorber Type: Gas Pressure
- Suspension: for vehicles without electronic suspension control
- Axle Load front axle to [kg]: 1550
- Axle Load rear axle to [kg]: 1550
- Condition: New
More
Article №: 46-332806
Details
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1550
- Lowered Suspension ca. [mm]: 30
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1700
- Lowered Suspension ca. [mm]: 30
-
- Construction Year to: 08/2010
- Registration Type: Conditions see certificate
- Suspension: for vehicles without electronic suspension control
- Shock Absorber Type: Gas Pressure
- Vehicle Equipment: for vehicles without level control
- Condition: New
More
£1252,07
incl. 20% VAT, excl. delivery costs
excl. bulky item surcharge
Not in stock
excl. bulky item surcharge
Details
Article №: 46-334213
Details
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1550
- Lowered Suspension ca. [mm]: 30
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1550
- Lowered Suspension ca. [mm]: 30
-
- Construction Year to: 08/2010
- Registration Type: Conditions see certificate
- Suspension: for vehicles without electronic suspension control
- Shock Absorber Type: Gas Pressure
- Vehicle Equipment: for vehicles with level control
- Condition: New
More
You may also be interested in
Article №: E90-25-003-01-22
Details
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Axle Load front axle to [kg]: 845
- Axle Load rear axle to [kg]: 820
- Product line: B12 Pro-Kit
- Condition: New
More
Article №: 1120-7492
Details
- Fitting Position: Rear Axle, Front Axle
- Shock Absorber System: cannot be set/adjusted, Twin-Tube
- Condition: New
More
Article №: 40569-2
Details
- for components see parts list
- Vehicle Equipment: for vehicles without level control
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Condition: New
More
Article №: 31037-4
Details
- for components see parts list
- Lowered front axle [mm]: 60
- Lowered rear axle [mm]: 40
- Axle Load front axle from [kg]: 951
- Axle Load front axle to [kg]: 950
- Vehicle Equipment: for vehicles without level control
- Registration Type: with TÜV® certificate
- Quantity Unit: Set
- Fitting Position: Front Axle, Rear Axle
- Spring Design: Coil Spring
- Vehicle type: W124
- Shock Absorber Design: Suspension Strut
- Follow installation instructions
- Condition: New
More
Article №: 40556-2
Details
- for components see parts list
- Follow installation instructions
- Condition: New
More
Article №: 40539-2
Details
- for components see parts list
- Lowered Suspension [mm]: 40
- Vehicle Equipment: for vehicles without level control
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Condition: New
More
Article №: 40644-2
Details
- for components see parts list
- Follow installation instructions
- Condition: New
More
Article №: PSS65-25-033-01-22
Details
- Suspension: Threaded Suspension (height adjustable)
- Registration Type: with certificate
- Vehicle Equipment: for vehicles without level control
- Axle Load rear axle to [kg]: 945
- Product line: Pro-Street-S
- Follow installation instructions
- Condition: New
More
Article №: 40749-8
Details
- for components see parts list
- Registration Type: with TÜV® certificate, with General Operating Permit (ABE)
- Follow installation instructions
- Condition: New
More
Article №: 29316-2
Details
- for components see parts list
- Braking/Drive Dynamics: for vehicles without Airmatic DC, for vehicles without ADS
- Vehicle Equipment: for vehicles with level control
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Condition: New
More
Article №: 29212-1
Details
- for components see parts list
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Condition: New
More
Article №: 47-258037
Details
- Shock Absorber Type: Gas Pressure
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Product line: - B14 PSS
- Condition: New
More
Article №: E90-25-002-01-22
Details
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Axle Load front axle to [kg]: 970
- Axle Load rear axle to [kg]: 1030
- Product line: B12 Pro-Kit
- Condition: New
More
Article №: E90-25-001-04-22
Details
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Axle Load front axle to [kg]: 1070
- Axle Load rear axle to [kg]: 1035
- Product line: B12 Pro-Kit
- Condition: New
More
Article №: SA1185N0039
Details
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Condition: New
More
Article №: SA1185N0030
Details
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Condition: New
More
£125,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: MNE1185N0053
Details
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Supplementary Article / Supplementary Info Info 2: with rolling bearing
- Length [mm]: 374, 552
- Condition: New
More
Article №: MNE1185N0042
Details
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Bottom Plate, Top pin
- Supplementary Article / Supplementary Info Info 2: with rolling bearing
- Condition: New
More
Article №: MNE1185N0039
Details
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Supplementary Article / Supplementary Info Info 2: with rolling bearing
- Length [mm]: 374, 552
- Condition: New
More
Article №: C-3550
Details
- Fitting Position: Front Axle, Rear Axle
- Spring Type: for vehicles with air suspension
- Shock Absorber Mounting Type: Top yoke, Bottom eye, Bottom Clamp
- Manufactured in: USA
- Packaging length [cm]: 76,8
- Weight [kg]: 36,1
- Packaging width [cm]: 43,2
- Packaging height [cm]: 44,2
- Supplementary Article / Supplementary Info: with electronic bypass module (EBM)
- Net weight [kg]: 32,8
- without ECE/ABE approval
- Condition: New
More
Article №: 40662-2
Details
- for components see parts list
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Condition: New
More
