Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
-
Drive shaft and cv joint
- Drive shaft MERCEDES-BENZ Sprinter 3.5-T Platform/Chassis (W906) 316 LGT (906.133, 906.135, 906.233, 906.235) 156 hp Petrol/Liquified Petroleum Gas (LPG)
- Cv boot MERCEDES-BENZ Sprinter 3.5-T Platform/Chassis (W906) 316 LGT (906.133, 906.135, 906.233, 906.235) 156 hp Petrol/Liquified Petroleum Gas (LPG)
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Cv joint MERCEDES-BENZ Sprinter 3.5-T Platform/Chassis (W906) 316 LGT 1.8 (906.133, 906.135, 906.233, 906.235) 156 hp Petrol/Liquified Petroleum Gas (LPG)
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
MERCEDES-BENZ SPRINTER 3,5-t Platform/Chassis (906) 316 LGT (906.133, 906.135, 906.233, 906.235) year of manufacture 2008, 156 hp vehicle parts products
incl. 20% VAT, excl. delivery costs
- External Toothing wheel side: 30
- Internal Toothing wheel side: 27
- Sealing Ring Diameter [mm]: 65
- Joint Type: CV Joint
- Machined: with groove in inner part (middle)
- Thread Size: M16x1,5
- Diameter [mm]: 97,9
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle Left, Front Axle Right
- External Toothing wheel side: 27
- Internal Toothing wheel side: 22
- Sealing Ring Diameter [mm]: 56,5
- Supplementary Article / Supplementary Info: with retaining ring rear side
- Fabrication Number: NPZ-RE-038
- Condition: New
Over 100 in stock

incl. 20% VAT, excl. delivery costs
- Length [mm]: 129,5
- External Toothing wheel side: 25
- Internal Toothing wheel side: 25
- Sealing Ring Diameter [mm]: 60,2
- Joint Type: CV Joint
- Machined: with groove in inner part (inside)
- Thread Size: M20x1,5
- Diameter [mm]: 88
- Condition: New
Over 100 in stock

incl. 20% VAT, excl. delivery costs
- Fitting Position: A1
- Length [mm]: 132
- External Toothing wheel side: 25
- Internal Toothing wheel side: 25
- Transmission Type: Manual Transmission
- Sealing Ring Diameter [mm]: 60
- Thread Size: M20X1,5
- Supplementary Article / Supplementary Info: Lock ring, inside
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle Right, Front Axle Left
- External Toothing wheel side: 25
- Internal Toothing wheel side: 25
- Sealing Ring Diameter [mm]: 60,2
- Diameter [mm]: 88,8
- Fabrication Number: NPZ-ME-007
- Condition: New
Over 100 in stock

incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle, Wheel Side
- External Toothing wheel side: 30
- Internal Toothing wheel side: 28
- Sealing Ring Diameter [mm]: 66
- Diameter [mm]: 102
- Packaging length [cm]: 20,5
- Packaging width [cm]: 11,0
- Packaging height [cm]: 11,0
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Length [mm]: 110
- External Toothing wheel side: 30
- Internal Toothing wheel side: 25
- Sealing Ring Diameter [mm]: 71
- Joint Type: 8-ball joint
- Thread Size: M16X1,5
- Technical Information Number: Groove Type Inner
- Bellows Material: Polychloroprene (Neoprene)
- Condition: New
Over 100 in stock