Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Cv joint Mercedes Sprinter W906 313 CDI 2.2 (906.631, 906.633, 906.635) 129 hp Diesel
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
MERCEDES-BENZ SPRINTER 3,5-t Box (906) 313 CDI (906.631, 906.633, 906.635, 906.637) year of manufacture 2006, 129 hp vehicle parts products
incl. 20% VAT, excl. delivery costs
- External Toothing wheel side: 30
- Internal Toothing wheel side: 27
- Sealing Ring Diameter [mm]: 65
- Joint Type: CV Joint
- Machined: with groove in inner part (middle)
- Thread Size: M16x1,5
- Diameter [mm]: 97,9
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle Left, Front Axle Right
- External Toothing wheel side: 27
- Internal Toothing wheel side: 22
- Sealing Ring Diameter [mm]: 56,5
- Supplementary Article / Supplementary Info: with retaining ring rear side
- Fabrication Number: NPZ-RE-038
- Condition: New
Over 100 in stock

incl. 20% VAT, excl. delivery costs
- Length [mm]: 129,5
- External Toothing wheel side: 25
- Internal Toothing wheel side: 25
- Sealing Ring Diameter [mm]: 60,2
- Joint Type: CV Joint
- Machined: with groove in inner part (inside)
- Thread Size: M20x1,5
- Diameter [mm]: 88
- Condition: New
Over 100 in stock

incl. 20% VAT, excl. delivery costs
- Fitting Position: A1
- Length [mm]: 132
- External Toothing wheel side: 25
- Internal Toothing wheel side: 25
- Transmission Type: Manual Transmission
- Sealing Ring Diameter [mm]: 60
- Thread Size: M20X1,5
- Supplementary Article / Supplementary Info: Lock ring, inside
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle Right, Front Axle Left
- External Toothing wheel side: 25
- Internal Toothing wheel side: 25
- Sealing Ring Diameter [mm]: 60,2
- Diameter [mm]: 88,8
- Fabrication Number: NPZ-ME-007
- Condition: New
Over 100 in stock

incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle, Wheel Side
- External Toothing wheel side: 30
- Internal Toothing wheel side: 28
- Sealing Ring Diameter [mm]: 66
- Diameter [mm]: 102
- Packaging length [cm]: 20,5
- Packaging width [cm]: 11,0
- Packaging height [cm]: 11,0
- Condition: New
Over 100 in stock