Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
-
Damping
- Shock absorber SLK R171 55AMG (171.473) 360 hp Petrol
- Coil spring SLK R171 55AMG (171.473) 360 hp Petrol
- Top strut mount and bearing SLK R171 55AMG (171.473) 360 hp Petrol
- Suspension kit, coil springs SLK R171 55AMG (171.473) 360 hp Petrol
- Shock absorber dust cover and bump stops SLK R171 55AMG (171.473) 360 hp Petrol
- Suspension kit, shock absorber and coil spring SLK R171 55AMG (171.473) 360 hp Petrol
- Repair kit, wheel suspension SLK R171 55AMG (171.473) 360 hp Petrol
- Spring cap SLK R171 55AMG (171.473) 360 hp Petrol
- Camber bolts SLK R171 55AMG (171.473) 360 hp Petrol
- Hydraulic oil SLK R171 55AMG (171.473) 360 hp Petrol
- Mounting, shock absorbers SLK 55AMG (171.473) 360 hp Petrol
- Relay, leveling control SLK 55AMG (171.473) 360 hp Petrol
- Shock absorber mounting brackets SLK 55AMG (171.473) 360 hp Petrol
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Wiper and washer system
Suspension kit, shock absorber and coil spring SLK R171 55 AMG 5.4 (171.473) 360 hp Petrol
Article №: 29212-1
Details
-
- Registration Type: with TÜV® certificate
-
- Lowered rear axle to [mm]: 55
-
- Lowered rear axle from [mm]: 25
-
- Lowered front axle to [mm]: 50
-
- Lowered front axle from [mm]: 30
- for components see parts list
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Condition: New
More
Article №: 47-116115
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 940
- Lowered Suspension ca. [mm]: 35-45
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 910
- Lowered Suspension ca. [mm]: 35-45
- Shock Absorber Type: Gas Pressure
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Product line: - B14 PSS
- Condition: New
More
Article №: 741153
Details
- Product line: BlueLine
- Quantity Unit: Set
- Fitting Position: Front Axle, Rear Axle
- Shock Absorber Design: Suspension Strut
- Spring Design: Coil Spring
- Surface: Powder coated, Galvanically coated
- Shock Absorber System: Height Adjustable
- Axle Load front axle to [kg]: 910
- Axle Load rear axle to [kg]: 940
- Lowered front axle from [mm]: 40
- Lowered rear axle from [mm]: 35
- Lowered front axle to [mm]: 50
- Lowered rear axle to [mm]: 50
- Registration Type: with TÜV® certificate
- Follow installation instructions: +
- Condition: New
More
Article №: 48-116077
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 940
- Lowered Suspension ca. [mm]: 35-45
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 910
- Lowered Suspension ca. [mm]: 35-45
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Mechanically adjustable shock strength, Built-in adjustable
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Product line: - B16 PSS9
- Condition: New
More
You may also be interested in
Article №: E90-25-003-01-22
Details
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Axle Load front axle to [kg]: 845
- Axle Load rear axle to [kg]: 820
- Product line: B12 Pro-Kit
- Condition: New
More
Article №: 1120-7492
Details
- Fitting Position: Rear Axle, Front Axle
- Shock Absorber System: cannot be set/adjusted, Twin-Tube
- Condition: New
More
Article №: 40569-2
Details
- for components see parts list
- Vehicle Equipment: for vehicles without level control
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Condition: New
More
Article №: 31037-4
Details
- for components see parts list
- Lowered front axle [mm]: 60
- Lowered rear axle [mm]: 40
- Axle Load front axle from [kg]: 951
- Axle Load front axle to [kg]: 950
- Vehicle Equipment: for vehicles without level control
- Registration Type: with TÜV® certificate
- Quantity Unit: Set
- Fitting Position: Front Axle, Rear Axle
- Spring Design: Coil Spring
- Vehicle type: W124
- Shock Absorber Design: Suspension Strut
- Follow installation instructions
- Condition: New
More
Article №: 40556-2
Details
- for components see parts list
- Follow installation instructions
- Condition: New
More
Article №: 40539-2
Details
- for components see parts list
- Lowered Suspension [mm]: 40
- Vehicle Equipment: for vehicles without level control
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Condition: New
More
Article №: E90-25-023-01-22
Details
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Axle Load front axle to [kg]: 880
- Axle Load rear axle to [kg]: 940
- Product line: B12 Pro-Kit
- Condition: New
More
Article №: 40644-2
Details
- for components see parts list
- Follow installation instructions
- Condition: New
More
Article №: PSS65-25-033-01-22
Details
- Suspension: Threaded Suspension (height adjustable)
- Registration Type: with certificate
- Vehicle Equipment: for vehicles without level control
- Axle Load rear axle to [kg]: 945
- Product line: Pro-Street-S
- Follow installation instructions
- Condition: New
More
Article №: 40749-7
Details
- for components see parts list
- Registration Type: with TÜV® certificate, with General Operating Permit (ABE)
- Follow installation instructions
- Condition: New
More
Article №: 29316-2
Details
- for components see parts list
- Braking/Drive Dynamics: for vehicles without Airmatic DC, for vehicles without ADS
- Vehicle Equipment: for vehicles with level control
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Condition: New
More
Article №: 49-265262
Details
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Electronically adjustable shock strength, Built-in adjustable
- Registration Type: Conditions see certificate
- Suspension: for vehicles with electronic suspension control, Threaded Suspension (height adjustable)
- Condition: New
More
Article №: 1120-3921
Details
- Fitting Position: Rear Axle, Front Axle
- Shock Absorber System: cannot be set/adjusted, Twin-Tube
- Condition: New
More
Article №: E90-25-002-01-22
Details
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Axle Load front axle to [kg]: 970
- Axle Load rear axle to [kg]: 1030
- Product line: B12 Pro-Kit
- Condition: New
More
Article №: SA1185N0035
Details
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Condition: New
More
Article №: SA1185N0023
Details
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Condition: New
More
Article №: SA1185N0013
Details
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut, Telescopic Shock Absorber
- Shock Absorber System: Twin-Tube, Monotube
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Condition: New
More
Article №: MNE1185N0044
Details
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Supplementary Article / Supplementary Info Info 2: without bearing
- Condition: New
More
Article №: MNE1185N0041
Details
- Shock Absorber Type: Oil Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Supplementary Article / Supplementary Info Info 2: with rolling bearing
- Condition: New
More
Article №: MNE1185N0019
Details
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Condition: New
More
Article №: C-5038
Details
- Fitting Position: Front Axle, Rear Axle
- Spring Type: for vehicles with air suspension
- Braking/Drive Dynamics: for vehicles with ADS, for vehicles with Airmatic DC
- Shock Absorber Mounting Type: Top yoke, Bottom Clamp, Bottom Fork
- Manufactured in: USA
- Packaging length [cm]: 78,74
- Weight [kg]: 36,97
- Packaging width [cm]: 43,18
- Packaging height [cm]: 43,18
- Supplementary Article / Supplementary Info: with electronic bypass module (EBM)
- Net weight [kg]: 30,71
- without ECE/ABE approval
- Condition: New
More
