Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
-
Clutch
- Clutch kit Mercedes R172 300 (172.438) 245 hp Petrol
- Clutch master cylinder Mercedes R172 300 (172.438) 245 hp Petrol
- Clutch slave cylinder Mercedes R172 300 (172.438) 245 hp Petrol
- Central slave cylinder Mercedes R172 300 (172.438) 245 hp Petrol
- Clutch release bearing Mercedes R172 300 (172.438) 245 hp Petrol
- Clutch switch Mercedes R172 300 (172.438) 245 hp Petrol
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Wiper and washer system
Clutch kit Mercedes R172 300 2.0 (172.438) 245 hp Petrol
Article №: 624 3978 09
Details
- Diameter: 240
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Adjustment: with automatic adjustment
- Condition: New
More
Inside the package:
- Clutch Pressure Plate 1
- Clutch Disc 1
More
Article №: BZS2070
Details
- Diameter: 240
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- Multi-piece: two-piece
- Condition: New
More
You may also be interested in
Article №: 3000 970 133
Details
- Diameter: 240
- only available in set
- Condition: New
More
Article №: 600 0291 00
Details
- Supplementary Article / Supplementary Info Info 2: with flywheel, with bolts/screws, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, with pilot bearing
- Adjustment: with automatic adjustment
- Number of mounting bores: 8
- Condition: New
More
Inside the package:
More
Article №: 600 0355 00
Details
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set
- Supplementary Article / Supplementary Info: with central slave cylinder
- Transmission Type: not for semi-automatic
- Adjustment: with automatic adjustment
- Number of mounting bores: 8
- Condition: New
More
Inside the package:
More
Article №: 600 0290 00
Details
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, with pilot bearing
- Adjustment: with automatic adjustment
- Number of mounting bores: 8
- Condition: New
More
Inside the package:
More
Article №: 600 0255 00
Details
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, with pilot bearing
- Adjustment: with automatic adjustment
- Max. Clearance Angle [Degree]: 10
- Number of mounting bores: 8
- Condition: New
More
Inside the package:
More
Article №: 2290 601 108
Details
- Product line: ZMS Modul XTend plus CSC
- Diameter: 240
- Number of Teeth: 26
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with central slave cylinder, with clutch pressure plate, with dual-mass flywheel, with flywheel screws
- Mounting Type: not pre-mounted
- Condition: New
More
Article №: 600 0329 00
Details
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set
- Supplementary Article / Supplementary Info: with central slave cylinder
- Adjustment: with automatic adjustment
- Number of mounting bores: 8
- Condition: New
More
Inside the package:
More
Article №: 625 3021 00
Details
- Product line: RepSet
- Diameter: 250
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, Check and replace dual-mass flywheel if necessary.
- Condition: New
More
Article №: 622 3427 33
Details
- Diameter: 215
- Supplementary Article / Supplementary Info: with central slave cylinder
- for flywheel depth [mm]: 12,7
- Condition: New
More
Article №: 624 3930 33
Details
- Diameter: 240
- Supplementary Article / Supplementary Info: with central slave cylinder
- Transmission Type: not for semi-automatic
- Adjustment: with automatic adjustment
- Condition: New
More
Article №: 622 3096 09
Details
- Product line: RepSet
- Diameter: 220
- Supplementary Article / Supplementary Info Info 2: with clutch disc, without clutch release bearing
- for flywheel depth [mm]: 12,7
- Condition: New
More
£112,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3000 111 001
Details
- Diameter: 215
- Number of Teeth: 26
- for components see parts list
- Condition: New
More
Article №: 620 2520 33
Details
- Diameter: 200
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
Article №: 623 3215 33
Details
- Diameter: 230
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
Article №: ADN130220
Details
- Diameter: 230
- Number of Teeth: 21
- Supplementary Article / Supplementary Info: with synthetic grease
- Multi-piece: two-piece
- Observe service information
- Condition: New
More
£71,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3000 970 121
Details
- Product line: XTend
- Diameter: 240
- Number of Teeth: 26
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- Hub Profile: 26,5x29-26N
- Observe service information
- for flywheel depth [mm]: 12
- only available in set
- Condition: New
More
Article №: JT1673042
Details
- Number of Teeth: 26
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with central slave cylinder, with clutch pressure plate, with synthetic grease
- Hub Profile: 20.1x21.7
- Multi-piece: three-piece
- Clutch Pressure Plate Outer Diameter [mm]: 215
- Friction Lining Outer Diameter 1 [mm]: 215
- Condition: New
More
£135,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 962531CSC
Details
- Diameter: 230
- Supplementary Article / Supplementary Info Info 2: with clutch disc, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with clutch pressure plate, with central slave cylinder
- Hub Profile: 24.8 x 21
- Condition: New
More
£127,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 837529
Details
- Number of Teeth: 26
- Supplementary Article / Supplementary Info Info 2: with lock screw set, without sensor
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with flywheel screws, with central slave cylinder
- New Part
- Weight [kg]: 23,28
- Number of mounting bores: 8
- Bore Diameter [mm]: 36
- Tightening Torque [Nm]: 45
- Tightening angle [degrees]: 90
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Number of mounting bores at central slave cylinder: 2
- Material: Aluminium
- Condition: New
More
Article №: 623 3216 34
Details
- Diameter: 230
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
Article №: 624 3109 09
Details
- Diameter: 240
- Supplementary Article / Supplementary Info Info 2: with clutch disc, without clutch release bearing, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
Article №: 624 3243 33
Details
- Diameter: 240
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
Article №: 834397
Details
- Number of Teeth: 26
- Supplementary Article / Supplementary Info Info 2: without sensor
- Supplementary Article / Supplementary Info: with central slave cylinder
- New Part
- Hub Profile: 28,9 x 26,5
- Weight [kg]: 7,3
- Clutch: for vehicles with push type clutch
- Bore Diameter [mm]: 36
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Number of mounting bores at central slave cylinder: 2
- Material: Aluminium
- Condition: New
More
