Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs SL R129 500 (129.068) 306 hp Petrol
- Brake pads SL R129 500 (129.068) 306 hp Petrol
- Brake caliper SL R129 500 (129.068) 306 hp Petrol
- Drum brake SL R129 500 (129.068) 306 hp Petrol
- ABS sensor SL R129 500 (129.068) 306 hp Petrol
- Brake caliper repair kit SL R129 500 (129.068) 306 hp Petrol
- Handbrake SL R129 500 (129.068) 306 hp Petrol
- Brake disc back plate SL R129 500 (129.068) 306 hp Petrol
- Brake pad wear sensor SL R129 500 (129.068) 306 hp Petrol
- Brake caliper carrier SL R129 500 (129.068) 306 hp Petrol
- Brake shoes SL 500 (129.068) 306 hp Petrol
- Brake hose SL 500 (129.068) 306 hp Petrol
- Master cylinder SL 500 (129.068) 306 hp Petrol
- Handbrake cable SL 500 (129.068) 306 hp Petrol
- Brake fluid SL 500 (129.068) 306 hp Petrol
- Handbrake shoes SL 500 (129.068) 306 hp Petrol
- Brake pad fitting kit SL 500 (129.068) 306 hp Petrol
- Brake servo SL 500 (129.068) 306 hp Petrol
- Accessory kit, brake shoes SL 500 (129.068) 306 hp Petrol
- Brake pads and discs SL 500 (129.068) 306 hp Petrol
- Brake light switch SL 500 (129.068) 306 hp Petrol
- Brake shoe adjuster SL 500 (129.068) 306 hp Petrol
- Abs ring SL 500 (129.068) 306 hp Petrol
- Pressure switch, brake hydraulics SL 500 (129.068) 306 hp Petrol
- Brake caliper piston SL 500 (129.068) 306 hp Petrol
- Brake disc bolts SL 500 (129.068) 306 hp Petrol
- Master cylinder repair kit SL 500 (129.068) 306 hp Petrol
- Lateral and longitudinal acceleration sensor SL 500 (129.068) 306 hp Petrol
- Abs pump SL 500 (129.068) 306 hp Petrol
- Control unit, brake / driving dynamics SL 500 (129.068) 306 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Wiper and washer system
Brake discs SL R129 500 5.0 (129.068) 306 hp Petrol
Article №: 82B1084
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 277,8
- Brake Disc Type: solid
- Number of Holes: 5/7
- Wheel Bolt Bore Diameter [mm]: 15
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 9
- Centering Diameter [mm]: 67
- Height [mm]: 58,2
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£22,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0933
Details
- Fitting Position: Front Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Number of Holes: 5/8
- Wheel Bolt Bore Diameter [mm]: 15,1
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 28
- Centering Diameter [mm]: 67
- Height [mm]: 45,5
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£22,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBD-0023234
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 277,8
- Brake Disc Type: solid
- Number of Holes: 5/7
- Wheel Bolt Bore Diameter [mm]: 15
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 9
- Centering Diameter [mm]: 67
- Height [mm]: 58,2
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£22,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 400.1450.20
Details
-
- Braking/Drive Dynamics: for vehicles without ESP
- Fitting Position: Rear Axle
- Product line: COAT Z
- Diameter [mm]: 290
- Brake Disc Type: solid
- Rim Hole Number: 5
- Hole Arrangement/Number: 7/5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,3
- Centering Diameter [mm]: 67
- Height [mm]: 57
- Weight [kg]: 4,23
- Surface: Coated
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£36,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 09.A742.21
Details
-
- Fitting Position: Rear Axle
- Braking/Drive Dynamics: for vehicles with ESP
- Product line: Prime
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Height [mm]: 57
- Surface: Coated
- Tightening Torque [Nm]: 130
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£40,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 16259
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Hub Diameter [mm]: 168
- Height [mm]: 57,5
- Weight [kg]: 7,23
- Drilled: no
- Condition: New
More
£41,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 08.D340.11
Details
-
- Fitting Position: Rear Axle
- Braking/Drive Dynamics: for vehicles without ESP
- Product line: Prime
- Diameter [mm]: 290
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,3
- Centering Diameter [mm]: 67
- Height [mm]: 57
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£43,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 43852
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 56
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Surface: Coated
- Machining: High-carbon
- Number of mounting bores: 2
- Observe service information
- Drilled: no
- Condition: New
More
£48,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 986 478 793
Details
-
- Construction Year to: 08/2001
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented, internally vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Height [mm]: 57,5
- Surface: Oiled
- Machining: High-carbon
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15
- Drilled: no
- Condition: New
More
£49,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 09.5373.20
Details
-
- Fitting Position: Front Axle
- Braking/Drive Dynamics: for vehicles without ESP
- Product line: Prime
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 25,4
- Centering Diameter [mm]: 67
- Height [mm]: 46
- Tightening Torque [Nm]: 120
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£52,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24.0122-0218.1
Details
-
- Construction Year to: 09/2001
- Braking/Drive Dynamics: for vehicles with ESP
- Vehicle configuration line / variant: - SL Edition
- Fitting Position: Rear Axle
- Diameter [mm]: 300,0
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Brake Disc Thickness [mm]: 22,0
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67,0
- Inner Diameter [mm]: 164,0
- Height [mm]: 57,5
- Surface: Coated
- Machining: Alloyed/High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0296/0784
- Bore Diameter [mm]: 15,0
- Drilled: no
- Condition: New
More
£52,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6658.10
Details
- Fitting Position: Front Axle
- Diameter [mm]: 285
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 26
- Centering Diameter [mm]: 59
- Height [mm]: 43,5
- Weight [kg]: 8
- Test Mark: K.B.A.: 61209
- Drilled: no
- Condition: New
More
£55,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 09.A742.31
Details
- Product line: Prime
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: perforated/vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Centering Diameter [mm]: 67
- Height [mm]: 57
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: yes
- Condition: New
More
£57,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 17390
Details
-
- Fitting Position: Front Axle
- Vehicle configuration line / variant: Not SL edition
- Product line: COATED
- Diameter [mm]: 334
- Brake Disc Type: Vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 32
- Minimum thickness [mm]: 30
- Centering Diameter [mm]: 67
- Hub Diameter [mm]: 165
- Height [mm]: 51,5
- Weight [kg]: 11,34
- Surface: Coated
- Drilled: no
- Condition: New
More
£58,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 17391
Details
-
- Fitting Position: Front Axle
- Vehicle configuration line / variant: Edition
- Diameter [mm]: 334
- Brake Disc Type: Perforated
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 32
- Minimum thickness [mm]: 30
- Centering Diameter [mm]: 67
- Hub Diameter [mm]: 165
- Height [mm]: 51,5
- Weight [kg]: 10,96
- Surface: Coated
- Drilled: yes
- Condition: New
More
£60,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 562947JC-1
Details
-
- Fitting Position: Front Axle
- Vehicle Equipment: for vehicles without sports package
- Diameter [mm]: 334
- Brake Disc Type: Vented
- Number of Holes: 5
- Bore Diameter 2 [mm]: 13,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 32
- Minimum thickness [mm]: 30
- Centering Diameter [mm]: 67
- Height [mm]: 51,6
- Weight [kg]: 11,74
- Surface: Coated
- Number of mounting bores: 1
- Version: JC
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Packing Type: Box
- Packaging width [cm]: 35
- Packaging height [cm]: 7
- Drilled: no
- Condition: New
More
£66,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 400.3647.20
Details
- Product line: COAT Z
- Fitting Position: Front Axle
- Diameter [mm]: 334
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Hole Arrangement/Number: 6/5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 32
- Minimum thickness [mm]: 30
- Centering Diameter [mm]: 67
- Height [mm]: 52
- Weight [kg]: 11,3
- Surface: Coated
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£68,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24.0132-0147.1
Details
-
- Construction Year to: 09/2001
- Vehicle configuration line / variant: + SL Edition
- Fitting Position: Front Axle
- Diameter [mm]: 334,0
- Brake Disc Type: perforated/vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Brake Disc Thickness [mm]: 32,0
- Minimum thickness [mm]: 30,0
- Centering Diameter [mm]: 67,0
- Inner Diameter [mm]: 154,0
- Height [mm]: 51,5
- Surface: Coated
- Machining: Alloyed/High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0640/1205
- Bore Diameter [mm]: 13,0
- Drilled: yes
- Condition: New
More
£70,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 26106
Details
- Fitting Position: Front Axle
- Diameter [mm]: 334
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 52
- Brake Disc Thickness [mm]: 32
- Minimum thickness [mm]: 30
- Surface: Coated
- not for vehicle configuration line / variant: SL-Edition
- Observe service information
- Drilled: no
- Condition: New
More
£74,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 09.D231.11
Details
-
- Fitting Position: Front Axle
- Braking/Drive Dynamics: for vehicles with ESP
- Product line: Prime
- Diameter [mm]: 334
- Brake Disc Type: internally vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 32
- Minimum thickness [mm]: 30
- Centering Diameter [mm]: 67
- Height [mm]: 52
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£76,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DDF1900C-1
Details
-
- Fitting Position: Front Axle
- Vehicle Equipment: for vehicles without sports package
- Product line: PREMIER
- Diameter [mm]: 334
- Brake Disc Type: Vented
- Number of Holes: 5
- Bore Diameter 2 [mm]: 13,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 32
- Minimum thickness [mm]: 30
- Centering Diameter [mm]: 67
- Height [mm]: 51,6
- Weight [kg]: 11,74
- Surface: Coated
- Number of mounting bores: 1
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Packing Type: Box
- Packaging length [cm]: 35
- Packaging width [cm]: 35
- Packaging height [cm]: 7
- Drilled: no
- Condition: New
More
£83,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8DD 355 122-391
Details
-
- Fitting Position: Front Axle
- not for vehicle configuration line / variant: SL-Edition
- Product line: PRO High Carbon
- Diameter [mm]: 334
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 05/06
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 32
- Minimum thickness [mm]: 30
- Centering Diameter [mm]: 67
- Height [mm]: 51,6
- Weight [kg]: 11,1
- Surface: Coated
- Machining: High-carbon
- Technical Information Number: 54517PRO_HC
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
£84,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 986 479 650
Details
-
- Construction Year to: 08/2001
- Fitting Position: Front Axle
- Component Number: P28
- Diameter [mm]: 334
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 32
- Minimum thickness [mm]: 30
- Centering Diameter [mm]: 67
- Height [mm]: 51,6
- Surface: Coated
- Machining: High-carbon
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 13,3
- Drilled: no
- Condition: New
More
£92,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B1503
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 05/07
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Height [mm]: 57,5
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Drilled: no
- Condition: New
More
£55,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: PRD2361
Details
-
- Fitting Position: Front Axle
- Vehicle Identification Number (VIN) to: F103936
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 25,4
- Centering Diameter [mm]: 67
- Height [mm]: 45,5
- Tightening Torque [Nm]: 11
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£8,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Showing 25 out of 104 products
Show the next items
- 1
- 2
- 3
- 4
- 5
