Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs W124 300D 4-matic (124.330) 109 hp Diesel
- Brake pads W124 300D 4-matic (124.330) 109 hp Diesel
- Brake caliper W124 300D 4-matic (124.330) 109 hp Diesel
- Drum brake W124 300D 4-matic (124.330) 109 hp Diesel
- ABS sensor W124 300D 4-matic (124.330) 109 hp Diesel
- Brake caliper repair kit W124 300D 4-matic (124.330) 109 hp Diesel
- Handbrake W124 300D 4-matic (124.330) 109 hp Diesel
- Brake disc back plate W124 300D 4-matic (124.330) 109 hp Diesel
- Brake pad wear sensor W124 300D 4-matic (124.330) 109 hp Diesel
- Brake caliper carrier W124 300D 4-matic (124.330) 109 hp Diesel
- Brake shoes 124-Series 300D 4-matic (124.330) 109 hp Diesel
- Brake hose 124-Series 300D 4-matic (124.330) 109 hp Diesel
- Master cylinder 124-Series 300D 4-matic (124.330) 109 hp Diesel
- Handbrake cable 124-Series 300D 4-matic (124.330) 109 hp Diesel
- Vacuum pump 124-Series 300D 4-matic (124.330) 109 hp Diesel
- Guide sleeve kit, brake caliper 124-Series 300D 4-matic (124.330) 109 hp Diesel
- Brake fluid 124-Series 300D 4-matic (124.330) 109 hp Diesel
- Handbrake shoes 124-Series 300D 4-matic (124.330) 109 hp Diesel
- Brake pad fitting kit 124-Series 300D 4-matic (124.330) 109 hp Diesel
- Brake servo 124-Series 300D 4-matic (124.330) 109 hp Diesel
- Accessory kit, brake shoes 124-Series 300D 4-matic (124.330) 109 hp Diesel
- Brake pads and discs 124-Series 300D 4-matic (124.330) 109 hp Diesel
- Brake light switch 124-Series 300D 4-matic (124.330) 109 hp Diesel
- Brake caliper piston 124-Series 300D 4-matic (124.330) 109 hp Diesel
- Brake disc bolts 124-Series 300D 4-matic (124.330) 109 hp Diesel
- Master cylinder repair kit 124-Series 300D 4-matic (124.330) 109 hp Diesel
- Overvoltage protection relay, ABS 124-Series 300D 4-matic (124.330) 109 hp Diesel
- Abs pump 124-Series 300D 4-matic (124.330) 109 hp Diesel
- Control unit, brake / driving dynamics 124-Series 300D 4-matic (124.330) 109 hp Diesel
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs W124 300 D 3.0 4-matic (124.330) 109 hp Diesel
Article №: 82B0988
Details
-
- Construction Year from: 12/1986
- Construction Year to: 08/1991
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5/7
- Wheel Bolt Bore Diameter [mm]: 13,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 9
- Centering Diameter [mm]: 67
- Height [mm]: 55,4
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£15,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0229
Details
-
- Construction Year from: 09/1989
- Brakes-/Drive Dynamics Articles: not for ASR, not for ETS
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5/7
- Wheel Bolt Bore Diameter [mm]: 15
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 8,9
- Centering Diameter [mm]: 67
- Height [mm]: 55,3
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£17,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0426
Details
- Fitting Position: Front Axle
- Diameter [mm]: 283,7
- Brake Disc Type: Vented
- Number of Holes: 5/8
- Wheel Bolt Bore Diameter [mm]: 15,1
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 21,8
- Centering Diameter [mm]: 67
- Height [mm]: 43,4
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£28,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBD-0023138
Details
-
- Construction Year from: 12/1986
- Construction Year to: 08/1991
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5/7
- Wheel Bolt Bore Diameter [mm]: 13,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 9
- Centering Diameter [mm]: 67
- Height [mm]: 55,4
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£15,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 08.4738.14
Details
- Product line: Prime
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 7,3
- Centering Diameter [mm]: 67
- Height [mm]: 54
- Tightening Torque [Nm]: 120
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£17,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 15779
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 7,3
- Centering Diameter [mm]: 67
- Hub Diameter [mm]: 166
- Height [mm]: 55
- Weight [kg]: 3,26
- Surface: Coated
- Drilled: no
- Condition: New
More
£19,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 986 478 188
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 7,3
- Centering Diameter [mm]: 67
- Height [mm]: 55,3
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15
- Drilled: no
- Condition: New
More
£19,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0229P
Details
-
- Fitting Position: Rear Axle
- Construction Year from: 09/1989
- Brakes-/Drive Dynamics Articles: not for ASR, not for ETS
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5/7
- Wheel Bolt Bore Diameter [mm]: 15
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 8,9
- Centering Diameter [mm]: 67
- Height [mm]: 55,3
- Surface: Coated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£19,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 231-04-017
Details
-
- Fitting Position: Rear Axle
- Construction Year from: 12/1986
- Construction Year to: 08/1991
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 9
- Centering Diameter [mm]: 67
- Height [mm]: 55,5
- Required quantity: 2
- Test Mark: ECE R90
- Replace in pairs only
- Article number of recommended accessories: 131-07-631, 131-07-632
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£19,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 231-04-017-2
Details
-
- Fitting Position: Rear Axle
- Construction Year from: 12/1986
- Construction Year to: 08/1991
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 9
- Centering Diameter [mm]: 67
- Height [mm]: 55,5
- Required quantity: 2
- Test Mark: ECE R90
- Replace in pairs only
- Article number of recommended accessories: 131-07-631, 131-07-632
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£19,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 561333JC
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 7,3
- Centering Diameter [mm]: 67
- Height [mm]: 53,5
- Weight [kg]: 6,74
- Surface: Coated
- Tightening Torque [Nm]: 120
- Version: JC
- Test Mark: R90 Homologated
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Packing Type: Box
- Packaging width [cm]: 27,5
- Packaging height [cm]: 13,5
- Drilled: no
- Condition: New
More
£19,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 08138
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 55
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 7,3
- Centering Diameter [mm]: 67
- Weight [kg]: 3,0
- Surface: Coated
- Number of mounting bores: 2
- Observe service information
- Drilled: no
- Condition: New
More
£19,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0988P
Details
-
- Construction Year from: 12/1986
- Construction Year to: 08/1991
- Fitting Position: Rear Axle
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5/7
- Wheel Bolt Bore Diameter [mm]: 13,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 9
- Centering Diameter [mm]: 67
- Height [mm]: 55,4
- Surface: Coated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£20,42
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 561333CH
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 7,3
- Centering Diameter [mm]: 67
- Height [mm]: 53,5
- Weight [kg]: 6,74
- Tightening Torque [Nm]: 120
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packing Type: Box
- Packaging length [cm]: 27
- Packaging width [cm]: 27,9
- Packaging height [cm]: 13, 11,5
- Drilled: no
- Condition: New
More
£20,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6051020
Details
-
- Construction Year from: 12/1986
- Construction Year to: 08/1991
- Fitting Position: Rear Axle
- Diameter [mm]: 258, 258,0
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 9,0
- Centering Diameter [mm]: 67,0
- Height [mm]: 55,4
- Production Number: 6051020
- Drilled: no
- Condition: New
More
£23,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 15737
Details
-
- Construction Year from: 09/1989
- Braking/Drive Dynamics: for vehicles without ASR, for vehicles without ETS
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 7,3
- Weight [kg]: 1,67
- Drilled: no
- Condition: New
More
£24,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: M2091P
Details
-
- Construction Year from: 12/1986
- Construction Year to: 08/1991
- Fitting Position: Rear Axle
- Braking/Drive Dynamics: for vehicles without ASR, for vehicles without ETS
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 7,3
- Centering Diameter [mm]: 67
- Height [mm]: 53,5
- Drilled: no
- Condition: New
More
£25,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: B130270
Details
-
- Fitting Position: Rear Axle
- Construction Year from: 12/1986
- Construction Year to: 08/1991
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 7,3
- Centering Diameter [mm]: 67
- Inner Diameter [mm]: 164
- Height [mm]: 55,5
- Bore Diameter [mm]: 12,8
- Drilled: no
- Condition: New
More
£26,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-0722
Details
-
- Fitting Position: Rear Axle
- Construction Year from: 09/1989
- Braking/Drive Dynamics: for vehicles without ASR, for vehicles without ETS
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 7,3
- Centering Diameter [mm]: 67
- Height [mm]: 53,5
- Surface: Painted
- Machining: High-carbon
- Test Mark: E190R0203 C0204/0283
- Drum diameter [mm]: 164
- Drilled: no
- Condition: New
More
£26,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6051010
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258, 258,0
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 9,0
- Centering Diameter [mm]: 67,1
- Height [mm]: 55,4
- Production Number: 6051010
- Drilled: no
- Condition: New
More
£26,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: QD4070
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 8,9
- Minimum thickness [mm]: 7,3
- Centering Diameter [mm]: 67
- Height [mm]: 55,3
- Surface: Painted, Coated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Packaging length [cm]: 30
- Packaging width [cm]: 28,5
- Packaging height [cm]: 15
- Drilled: no
- Condition: New
More
£26,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24010901201PR-PCS-MS
Details
-
- Construction Year from: 12/1986
- Construction Year to: 08/1991
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 7,3
- Centering Diameter [mm]: 67
- Inner Diameter [mm]: 164
- Height [mm]: 55,5
- Surface: Coated
- Required quantity: 2
- Bore Diameter [mm]: 12,8
- Net weight [kg]: 3,09
- Gross Weight [kg]: 3,49
- Condition: New
More
£27,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-0770
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 259
- Brake Disc Type: solid
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 7,3
- Centering Diameter [mm]: 67
- Height [mm]: 55,4
- Surface: Coated, Oiled
- Technical Information Number: 98200 0595 0 1 PRO
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Packaging length [cm]: 30
- Packaging width [cm]: 28,5
- Packaging height [cm]: 15
- Drilled: no
- Condition: New
More
£27,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCH20214
Details
-
- Fitting Position: Rear Axle
- Construction Year from: 09/1989
- Brakes-/Drive Dynamics Articles: not for ASR, not for ETS
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5/7
- Wheel Bolt Bore Diameter [mm]: 15
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 8,9
- Centering Diameter [mm]: 67
- Height [mm]: 55,3
- Surface: Coated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£36,75
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCH20737
Details
-
- Construction Year from: 12/1986
- Construction Year to: 08/1991
- Fitting Position: Rear Axle
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5/7
- Wheel Bolt Bore Diameter [mm]: 13,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 9
- Centering Diameter [mm]: 67
- Height [mm]: 55,4
- Surface: Coated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£51,77
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 206 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
