Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs Mercedes W220 S500 4-matic (220.084, 220.184) 306 hp Petrol
- Brake pads Mercedes W220 S500 4-matic (220.084, 220.184) 306 hp Petrol
- Brake caliper Mercedes W220 S500 4-matic (220.084, 220.184) 306 hp Petrol
- Drum brake Mercedes W220 S500 4-matic (220.084, 220.184) 306 hp Petrol
- ABS sensor Mercedes W220 S500 4-matic (220.084, 220.184) 306 hp Petrol
- Brake caliper repair kit Mercedes W220 S500 4-matic (220.084, 220.184) 306 hp Petrol
- Handbrake Mercedes W220 S500 4-matic (220.084, 220.184) 306 hp Petrol
- Brake disc back plate Mercedes W220 S500 4-matic (220.084, 220.184) 306 hp Petrol
- Brake pad wear sensor Mercedes W220 S500 4-matic (220.084, 220.184) 306 hp Petrol
- Brake caliper carrier Mercedes W220 S500 4-matic (220.084, 220.184) 306 hp Petrol
- Brake shoes S-Class S500 4-matic (220.084, 220.184) 306 hp Petrol
- Brake hose S-Class S500 4-matic (220.084, 220.184) 306 hp Petrol
- Master cylinder S-Class S500 4-matic (220.084, 220.184) 306 hp Petrol
- Handbrake cable S-Class S500 4-matic (220.084, 220.184) 306 hp Petrol
- Guide sleeve kit, brake caliper S-Class S500 4-matic (220.084, 220.184) 306 hp Petrol
- Brake fluid S-Class S500 4-matic (220.084, 220.184) 306 hp Petrol
- Handbrake shoes S-Class S500 4-matic (220.084, 220.184) 306 hp Petrol
- Brake pad fitting kit S-Class S500 4-matic (220.084, 220.184) 306 hp Petrol
- Brake servo S-Class S500 4-matic (220.084, 220.184) 306 hp Petrol
- Accessory kit, brake shoes S-Class S500 4-matic (220.084, 220.184) 306 hp Petrol
- Brake pads and discs S-Class S500 4-matic (220.084, 220.184) 306 hp Petrol
- Brake light switch S-Class S500 4-matic (220.084, 220.184) 306 hp Petrol
- Pressure switch, brake hydraulics S-Class S500 4-matic (220.084, 220.184) 306 hp Petrol
- Brake shoe adjuster S-Class S500 4-matic (220.084, 220.184) 306 hp Petrol
- Abs ring S-Class S500 4-matic (220.084, 220.184) 306 hp Petrol
- Brake caliper piston S-Class S500 4-matic (220.084, 220.184) 306 hp Petrol
- Brake disc bolts S-Class S500 4-matic (220.084, 220.184) 306 hp Petrol
- Lateral and longitudinal acceleration sensor S-Class S500 4-matic (220.084, 220.184) 306 hp Petrol
- Abs pump S-Class S500 4-matic (220.084, 220.184) 306 hp Petrol
- High-performance brake pads S-Class S500 4-matic (220.084, 220.184) 306 hp Petrol
- Control unit, brake / driving dynamics S-Class S500 4-matic (220.084, 220.184) 306 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs Mercedes W220 S 500 5.0 4-matic (220.084, 220.184) 306 hp Petrol
Article №: 82B0638
Details
- Fitting Position: Rear Axle
- Diameter: 300
- Brake Disc Type: Vented
- Number of Holes: 5/6
- Wheel Bolt Bore Diameter [mm]: 15,2
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness: 22
- Centering Diameter [mm]: 67
- Height [mm]: 58,5
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£30,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B1139
Details
- Fitting Position: Front Axle
- Diameter: 330
- Brake Disc Type: perforated/vented
- Number of Holes: 5/6
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness: 32
- Centering Diameter [mm]: 67
- Height [mm]: 47,6
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: yes
- Condition: New
More
£61,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBD-0022019
Details
- Fitting Position: Rear Axle
- Diameter: 300
- Brake Disc Type: Vented
- Number of Holes: 5/6
- Wheel Bolt Bore Diameter [mm]: 15,2
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness: 22
- Centering Diameter [mm]: 67
- Height [mm]: 58,5
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£30,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V30-80060
Details
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle
- Diameter: 300
- Brake Disc Type: Vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Height [mm]: 58,5
- Weight [kg]: 7,176
- Machining: Alloyed/High-carbon
- Brake Disc Hub Height [mm]: 37
- Packaging width [cm]: 32
- Packaging height [cm]: 13
- Packaging Depth [cm]: 32
- Drilled: no
- Condition: New
More
£32,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 015 523 0035
Details
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Rear Axle
- Diameter: 300
- Brake Disc Type: Vented
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: 15
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Height [mm]: 58,5
- Required quantity: 2
- Drilled: no
- Condition: New
More
£33,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BG3726
Details
- Fitting Position: Rear Axle
- Diameter: 300
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Height [mm]: 58,5
- Surface: Oiled
- Test Mark: E1 90R-02C0438/1623
- Drilled: no
- Condition: New
More
£35,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 23177
Details
- Fitting Position: Rear Axle
- Diameter: 300
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 59
- Brake Disc Thickness: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Surface: Coated
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Condition: New
More
£37,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADU1743110
Details
- Fitting Position: Rear Axle
- Diameter: 300
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 59
- Brake Disc Thickness: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Surface: Coated
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Condition: New
More
£38,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8DD 355 127-481
Details
- Product line: PRO High Carbon
- Fitting Position: Rear Axle
- Diameter: 300
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 05/06
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Height [mm]: 58,5
- Weight [kg]: 6,8
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
£38,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8DD 355 106-911
Details
- Product line: PRO
- Fitting Position: Rear Axle
- Diameter: 300
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 05/06
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Height [mm]: 58,5
- Weight [kg]: 6,8
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
£39,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 986 478 473
Details
-
- Fitting Position: Rear Axle
-
- Fitting Position: Rear Axle
- Special Purpose Vehicle: not for armoured vehicles
- Diameter: 300
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Height [mm]: 58,5
- Surface: Coated
- Machining: Alloyed/High-carbon
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15,2
- Drilled: no
- Condition: New
More
£42,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24012201921-PCS-MS
Details
- Fitting Position: Rear Axle
- Diameter: 300
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Inner Diameter [mm]: 180
- Height [mm]: 58,5
- Machining: Alloyed/High-carbon
- Required quantity: 2
- Bore Diameter [mm]: 15
- Net weight [kg]: 6,68
- Gross Weight [kg]: 6,68
- Drilled: no
- Condition: New
More
£43,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 02.35.135
Details
- Fitting Position: Rear Axle
- Diameter: 300
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness: 22
- Minimum thickness [mm]: 19,4
- Replace in pairs only
- for OE number: 220 423 0212
- Drilled: no
- Condition: New
More
£44,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DF4437
Details
- Fitting Position: Rear Axle
- Diameter: 300
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Height [mm]: 58,5
- Surface: Painted
- Machining: High-carbon
- Thread Size: 15
- Colour: black
- Test Mark: E1 90R-02 C0226/0199
- Drum diameter [mm]: 180
- Drilled: no
- Condition: New
More
£44,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 562102JC
Details
- Fitting Position: Rear Axle
- Diameter: 300
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 68
- Height [mm]: 58,5
- Weight [kg]: 13,66
- Surface: Coated
- Tightening Torque [Nm]: 150
- Version: JC
- Test Mark: R90 Homologated
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Packing Type: Box
- Packaging length [cm]: 32
- Packaging width [cm]: 32
- Packaging height [cm]: 15
- Drilled: no
- Condition: New
More
£45,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 61072.10
Details
- Fitting Position: Rear Axle
- Diameter: 300
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Height [mm]: 58,5
- Weight [kg]: 6,81
- Drilled: no
- Condition: New
More
£47,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DDF1457C
Details
- Product line: PREMIER
- Fitting Position: Rear Axle
- Diameter: 300
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Height [mm]: 58,5
- Weight [kg]: 13,66
- Surface: Coated
- Tightening Torque [Nm]: 150
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Packing Type: Box
- Packaging length [cm]: 30
- Packaging width [cm]: 30
- Packaging height [cm]: 11
- Drilled: no
- Condition: New
More
£49,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 23-1103FC
Details
-
- Brake Disc Type: Perforated
- Vehicle type: Exc. Long
- Diameter: 330,0
- Brake Disc Type: Vented, Perforated
- Number of Holes: 5
- Brake Disc Thickness: 32,0
- Centering Diameter [mm]: 67,0
- Height [mm]: 47,6
- Surface: Painted
- Test Mark: ECE-R90, ECE R90 APPROVED
- Drilled: yes
- Condition: New
More
£50,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 17113
Details
- Product line: COATED
- Fitting Position: Rear Axle
- Diameter: 300
- Brake Disc Type: Vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Hub Diameter [mm]: 168
- Height [mm]: 58,7
- Weight [kg]: 6,81
- Surface: Coated
- Drilled: no
- Condition: New
More
£51,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 10 92 3177
Details
- Fitting Position: Rear Axle
- Diameter: 300
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 58,5
- Brake Disc Thickness: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Weight [kg]: 6,800
- Surface: Coated
- Number of mounting bores: 1
- Drilled: no
- Condition: New
More
£54,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 09.9738.11
Details
- Product line: Prime
- Fitting Position: Rear Axle
- Diameter: 300
- Brake Disc Type: internally vented
- Number of Holes: 5
- Brake Disc Thickness: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Height [mm]: 59
- Surface: Coated
- Tightening Torque [Nm]: 150
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£55,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 400.3609.20
Details
- Product line: COAT Z
- Fitting Position: Rear Axle
- Diameter: 300
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Hole Arrangement/Number: 6/5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Height [mm]: 58
- Weight [kg]: 6,6
- Surface: Coated
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£58,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBD-0023289
Details
- Fitting Position: Front Axle
- Diameter: 330
- Brake Disc Type: perforated/vented
- Number of Holes: 5/6
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness: 32
- Centering Diameter [mm]: 67
- Height [mm]: 47,6
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: yes
- Condition: New
More
£61,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-4818
Details
- Fitting Position: Front Axle
- Diameter: 330
- Brake Disc Type: perforated/vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness: 32
- Minimum thickness [mm]: 30
- Centering Diameter [mm]: 67
- Height [mm]: 47
- Surface: Coated
- Machining: Alloyed/High-carbon
- Condition: New
More
Article №: 02.35.099
Details
- Fitting Position: Front Axle
- Diameter: 330
- Brake Disc Type: perforated/vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness: 32
- for OE number: 220 421 2512
- Drilled: yes
- Condition: New
More
Showing 25 out of 131 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
