Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs Mercedes W220 S55AMG Kompressor (220.074, 220.174) 500 hp Petrol
- Brake pads Mercedes W220 S55AMG Kompressor (220.074, 220.174) 500 hp Petrol
- Drum brake Mercedes W220 S55AMG Kompressor (220.074, 220.174) 500 hp Petrol
- ABS sensor Mercedes W220 S55AMG Kompressor (220.074, 220.174) 500 hp Petrol
- Brake caliper repair kit Mercedes W220 S55AMG Kompressor (220.074, 220.174) 500 hp Petrol
- Handbrake Mercedes W220 S55AMG Kompressor (220.074, 220.174) 500 hp Petrol
- Brake disc back plate Mercedes W220 S55AMG Kompressor (220.074, 220.174) 500 hp Petrol
- Brake pad wear sensor Mercedes W220 S55AMG Kompressor (220.074, 220.174) 500 hp Petrol
- Brake caliper carrier Mercedes W220 S55AMG Kompressor (220.074, 220.174) 500 hp Petrol
- Brake shoes Mercedes W220 S55AMG Kompressor (220.074, 220.174) 500 hp Petrol
- Brake hose S-Class S55AMG Kompressor (220.074, 220.174) 500 hp Petrol
- Master cylinder S-Class S55AMG Kompressor (220.074, 220.174) 500 hp Petrol
- Handbrake cable S-Class S55AMG Kompressor (220.074, 220.174) 500 hp Petrol
- Guide sleeve kit, brake caliper S-Class S55AMG Kompressor (220.074, 220.174) 500 hp Petrol
- Brake fluid S-Class S55AMG Kompressor (220.074, 220.174) 500 hp Petrol
- Handbrake shoes S-Class S55AMG Kompressor (220.074, 220.174) 500 hp Petrol
- Brake pad fitting kit S-Class S55AMG Kompressor (220.074, 220.174) 500 hp Petrol
- Brake servo S-Class S55AMG Kompressor (220.074, 220.174) 500 hp Petrol
- Accessory kit, brake shoes S-Class S55AMG Kompressor (220.074, 220.174) 500 hp Petrol
- Pressure switch, brake hydraulics S-Class S55AMG Kompressor (220.074, 220.174) 500 hp Petrol
- Brake light switch S-Class S55AMG Kompressor (220.074, 220.174) 500 hp Petrol
- Brake shoe adjuster S-Class S55AMG Kompressor (220.074, 220.174) 500 hp Petrol
- Brake caliper piston S-Class S55AMG Kompressor (220.074, 220.174) 500 hp Petrol
- Brake disc bolts S-Class S55AMG Kompressor (220.074, 220.174) 500 hp Petrol
- Lateral and longitudinal acceleration sensor S-Class S55AMG Kompressor (220.074, 220.174) 500 hp Petrol
- Abs pump S-Class S55AMG Kompressor (220.074, 220.174) 500 hp Petrol
- Control unit, brake / driving dynamics S-Class S55AMG Kompressor (220.074, 220.174) 500 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs Mercedes W220 S 55 AMG 5.4 Kompressor (220.074, 220.174) 500 hp Petrol
Article №: V30-80083
Details
-
- Fitting Position: Rear Axle
- Construction Year from: 09/2002
- Supplementary Info: Original VAICO Quality
- Diameter: 330
- Brake Disc Type: perforated/vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness: 26
- Minimum thickness [mm]: 24
- Centering Diameter [mm]: 67
- Height: 60,4
- Brake Disc Hub Height [mm]: 34,4
- Packaging width [cm]: 34
- Packaging height [cm]: 13
- Packaging Depth [cm]: 34
- Drilled: yes
- Condition: New
More
£31,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 17567
Details
- Fitting Position: Rear Axle
- Diameter: 330
- Brake Disc Type: perforated/vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness: 26
- Minimum thickness [mm]: 24
- Centering Diameter [mm]: 67
- Hub Diameter [mm]: 169
- Height: 61
- Weight [kg]: 9,48
- Surface: Coated
- Drilled: yes
- Condition: New
More
£56,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 43943
Details
- Fitting Position: Rear Axle
- Diameter: 330
- Brake Disc Type: perforated/vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness: 55
- Brake Disc Thickness: 26
- Minimum thickness [mm]: 24
- Centering Diameter [mm]: 67
- Surface: Coated
- Machining: High-carbon
- Engine Code: M113991
- Number of mounting bores: 2
- Observe service information
- Drilled: yes
- Condition: New
More
£58,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 17566
Details
- Product line: COATED
- Fitting Position: Front Axle
- Diameter: 360
- Brake Disc Type: perforated/vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness: 36
- Minimum thickness [mm]: 34
- Centering Diameter [mm]: 67
- Hub Diameter [mm]: 166
- Height: 76
- Weight [kg]: 16,46
- Surface: Coated
- Drilled: yes
- Condition: New
More
£59,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 21086
Details
- Fitting Position: Front Axle
- Diameter: 330
- Brake Disc Type: perforated/vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness: 76
- Brake Disc Thickness: 32
- Minimum thickness [mm]: 30
- Centering Diameter [mm]: 67
- Surface: Coated
- Number of mounting bores: 1
- Observe service information
- Drilled: yes
- Condition: New
More
£65,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADU174344
Details
- Fitting Position: Front Axle
- Diameter: 330
- Brake Disc Type: perforated/vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness: 76
- Brake Disc Thickness: 32
- Minimum thickness [mm]: 30
- Centering Diameter [mm]: 67
- Surface: Coated
- Number of mounting bores: 1
- Observe service information
- Drilled: yes
- Condition: New
More
£67,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 02.35.099
Details
- Fitting Position: Front Axle
- Diameter: 330
- Brake Disc Type: perforated/vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness: 32
- for OE number: 220 421 2512
- Drilled: yes
- Condition: New
More
Article №: 09.B842.21
Details
- Product line: Prime
- Fitting Position: Rear Axle
- Diameter: 330
- Brake Disc Type: perforated/vented
- Number of Holes: 5
- Brake Disc Thickness: 26
- Minimum thickness [mm]: 24
- Centering Diameter [mm]: 67
- Height: 61
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: yes
- Condition: New
More
Article №: 10 92 1086
Details
- Fitting Position: Front Axle
- Diameter: 330
- Brake Disc Type: perforated/vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness: 76
- Brake Disc Thickness: 32
- Minimum thickness [mm]: 30
- Centering Diameter [mm]: 67
- Weight [kg]: 10,1
- Surface: Coated
- Number of mounting bores: 1
- Drilled: yes
- Condition: New
More
Article №: 8DD 355 110-181
Details
- Fitting Position: Front Axle
- Diameter: 360
- Brake Disc Type: Perforated, internally vented
- Hole Arrangement/Number: 05/06
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness: 36
- Minimum thickness [mm]: 34
- Centering Diameter [mm]: 67
- Inner Diameter [mm]: 154,2
- Height: 76
- Weight [kg]: 16,5
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: yes
- Condition: New
More
Article №: 400.3635.20
Details
- Product line: COAT Z
- Fitting Position: Rear Axle
- Diameter: 330
- Brake Disc Type: internally vented, Perforated
- Rim Hole Number: 5
- Hole Arrangement/Number: 7/5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness: 26
- Minimum thickness [mm]: 24
- Centering Diameter [mm]: 67
- Height: 61
- Weight [kg]: 9,66
- Surface: Coated
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: yes
- Condition: New
More
Article №: 24.0126-0137.1
Details
- Fitting Position: Rear Axle
- Diameter: 330,0
- Brake Disc Type: perforated/vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Brake Disc Thickness: 26,0
- Minimum thickness [mm]: 24,0
- Centering Diameter [mm]: 67,0
- Inner Diameter [mm]: 180,0
- Height: 60,4
- Surface: Coated
- Machining: Alloyed/High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0640/1203
- Bore Diameter [mm]: 17,0
- Drilled: yes
- Condition: New
More
Article №: 44145
Details
- Fitting Position: Front Axle
- Diameter: 360
- Brake Disc Type: perforated/vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness: 76
- Brake Disc Thickness: 36
- Minimum thickness [mm]: 34
- Centering Diameter [mm]: 67
- Surface: Coated
- Machining: High-carbon
- Engine Code: M113991
- Number of mounting bores: 1
- Observe service information
- Drilled: yes
- Condition: New
More
Article №: 10 94 4145
Details
- Fitting Position: Front Axle
- Diameter: 360
- Brake Disc Type: perforated/vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness: 76
- Brake Disc Thickness: 36
- Minimum thickness [mm]: 34
- Centering Diameter [mm]: 67
- Weight [kg]: 16,46
- Surface: Coated
- Machining: High-carbon
- Engine Code: M113991
- Number of mounting bores: 1
- Drilled: yes
- Condition: New
More
Article №: DDF1586C-1
Details
- Product line: PREMIER Coat+ disc
- Fitting Position: Front Axle
- Diameter: 360
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness: 32
- Minimum thickness [mm]: 30
- Centering Diameter [mm]: 67
- Height: 84,5
- Weight [kg]: 14,79
- Surface: Coated
- Tightening Torque [Nm]: 150
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packaging length [cm]: 36
- Packaging width [cm]: 36
- Packaging height [cm]: 8,5
- Drilled: no
- Condition: New
More
Article №: DDF1662C-1
Details
- Product line: PREMIER Coat+ disc
- Fitting Position: Front Axle
- Diameter: 360
- Brake Disc Type: perforated/vented
- Number of Holes: 5
- Brake Disc Thickness: 36
- Minimum thickness [mm]: 34
- Centering Diameter [mm]: 67
- Height: 76
- Weight [kg]: 16,76
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packaging length [cm]: 35
- Packaging width [cm]: 35
- Packaging height [cm]: 8,7
- Drilled: yes
- Condition: New
More
Article №: 09.C943.11
Details
- Product line: Prime
- Fitting Position: Front Axle
- Diameter: 360
- Brake Disc Type: perforated/vented
- Number of Holes: 5
- Brake Disc Thickness: 36
- Minimum thickness [mm]: 34
- Centering Diameter [mm]: 67
- Height: 76
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: yes
- Condition: New
More
Article №: 400.3634.20
Details
- Product line: COAT Z
- Fitting Position: Front Axle
- Diameter: 360
- Brake Disc Type: internally vented, Perforated
- Rim Hole Number: 5
- Hole Arrangement/Number: 6/5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness: 36
- Minimum thickness [mm]: 34
- Centering Diameter [mm]: 67
- Height: 76
- Weight [kg]: 16,54
- Surface: Coated
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: yes
- Condition: New
More
Article №: 24.0136-0105.1
Details
- Fitting Position: Front Axle
- Diameter: 360,0
- Brake Disc Type: perforated/vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Brake Disc Thickness: 36,0
- Minimum thickness [mm]: 34,0
- Centering Diameter [mm]: 67,0
- Inner Diameter [mm]: 154,0
- Height: 76
- Surface: Coated
- Machining: Alloyed/High-carbon
- MAPP code available
- Bore Diameter [mm]: 15,0
- Drilled: yes
- Condition: New
More
Article №: 313385
Details
- Fitting Position: Rear Axle
- Diameter: 330
- Brake Disc Type: Vented
- Rim Hole Number: 5
- Brake Disc Thickness: 26
- Minimum thickness [mm]: 24
- Centering Diameter [mm]: 67
- Height: 61
- Surface: Coated
- Net weight [kg]: 9,48
- Drilled: no
- Condition: New
More
£28,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: C3M057ABE
Details
- Fitting Position: Front Axle
- Diameter: 345
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness: 76
- Minimum thickness [mm]: 30
- Centering Diameter [mm]: 67
- Height: 76
- Drilled: no
- Condition: New
More
£39,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 6963.10
Details
- Fitting Position: Rear Axle
- Diameter: 314,9, 315
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness: 21,8
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Height: 58,5
- Weight [kg]: 7,51
- Test Mark: K.B.A.: 61209
- Drilled: no
- Condition: New
More
£43,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: BS-7840
Details
- Fitting Position: Rear Axle
- Diameter: 330
- Brake Disc Type: perforated/vented
- Hole Arrangement/Number: 5/7
- Brake Disc Thickness: 26
- Minimum thickness [mm]: 24
- Centering Diameter [mm]: 67
- Height: 61
- Drilled: yes
- Condition: New
More
£43,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 6963.10
Details
- Fitting Position: Rear Axle
- Diameter: 314,9, 315
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness: 21,8
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Height: 58,5
- Weight [kg]: 7,51
- Test Mark: K.B.A.: 61209
- Drilled: no
- Condition: New
More
£47,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: C3M042ABE
Details
- Fitting Position: Front Axle
- Diameter: 330
- Brake Disc Type: Vented
- Number of Holes: 5
- Thickness: 32
- Brake Disc Thickness: 32
- Minimum thickness [mm]: 30
- Centering Diameter [mm]: 67
- Height: 76
- Surface: Painted
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£48,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Showing 25 out of 66 products
Show the next items
- 1
- 2
- 3
