Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs Mercedes W220 S600 (220.176) 500 hp Petrol
- Brake pads Mercedes W220 S600 (220.176) 500 hp Petrol
- Brake caliper Mercedes W220 S600 (220.176) 500 hp Petrol
- Drum brake Mercedes W220 S600 (220.176) 500 hp Petrol
- ABS sensor Mercedes W220 S600 (220.176) 500 hp Petrol
- Brake caliper repair kit Mercedes W220 S600 (220.176) 500 hp Petrol
- Handbrake Mercedes W220 S600 (220.176) 500 hp Petrol
- Brake disc back plate Mercedes W220 S600 (220.176) 500 hp Petrol
- Brake shoes Mercedes W220 S600 (220.176) 500 hp Petrol
- Brake pad wear sensor Mercedes W220 S600 (220.176) 500 hp Petrol
- Master cylinder S-Class S600 (220.176) 500 hp Petrol
- Brake caliper carrier S-Class S600 (220.176) 500 hp Petrol
- Brake hose S-Class S600 (220.176) 500 hp Petrol
- Handbrake cable S-Class S600 (220.176) 500 hp Petrol
- Guide sleeve kit, brake caliper S-Class S600 (220.176) 500 hp Petrol
- Handbrake shoes S-Class S600 (220.176) 500 hp Petrol
- Brake fluid S-Class S600 (220.176) 500 hp Petrol
- Brake pad fitting kit S-Class S600 (220.176) 500 hp Petrol
- Brake servo S-Class S600 (220.176) 500 hp Petrol
- Accessory kit, brake shoes S-Class S600 (220.176) 500 hp Petrol
- Brake pads and discs S-Class S600 (220.176) 500 hp Petrol
- Brake light switch S-Class S600 (220.176) 500 hp Petrol
- Brake shoe adjuster S-Class S600 (220.176) 500 hp Petrol
- Abs ring S-Class S600 (220.176) 500 hp Petrol
- Brake caliper piston S-Class S600 (220.176) 500 hp Petrol
- Brake disc bolts S-Class S600 (220.176) 500 hp Petrol
- Pressure switch, brake hydraulics S-Class S600 (220.176) 500 hp Petrol
- Abs pump S-Class S600 (220.176) 500 hp Petrol
- Lateral and longitudinal acceleration sensor S-Class S600 (220.176) 500 hp Petrol
- Control unit, brake / driving dynamics S-Class S600 (220.176) 500 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs Mercedes W220 S 600 5.5 (220.176) 500 hp Petrol
Article №: 92056800
Details
-
- Fitting Position: Rear Axle
- Vehicle Identification Number (VIN) to: A314999
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 05/07
- Wheel Bolt Bore Diameter [mm]: 17
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Inner Diameter [mm]: 164
- Height [mm]: 60
- Weight [kg]: 7,4
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 31,3
- Packaging width [cm]: 31,3
- Packaging height [cm]: 14
- Drilled: no
- Condition: New
More
£ 46,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24957
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 330
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 59,3
- Brake Disc Thickness [mm]: 26
- Minimum thickness [mm]: 24
- Weight [kg]: 9,683
- Surface: Coated
- Special Purpose Vehicle: not for armoured vehicles
- Observe service information
- Drilled: no
- Condition: New
More
£ 49,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BDC5344
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 315
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Height [mm]: 58
- Drilled: no
- Condition: New
More
£ 53,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 17566
Details
-
- Fitting Position: Front Axle
- Special Purpose Vehicle: not for armoured vehicles
- Product line: COATED
- Diameter [mm]: 360
- Brake Disc Type: perforated/vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 36
- Minimum thickness [mm]: 34
- Centering Diameter [mm]: 67
- Hub Diameter [mm]: 166
- Height [mm]: 76
- Weight [kg]: 16,46
- Surface: Coated
- Drilled: yes
- Condition: New
More
£ 60,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 09.B842.11
Details
-
- Fitting Position: Rear Axle
- Special Purpose Vehicle: not for armoured vehicles
- Product line: COATED DISC LINE
- Diameter [mm]: 330
- Brake Disc Type: internally vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 26
- Minimum thickness [mm]: 23,4
- Centering Diameter [mm]: 67
- Height [mm]: 61
- Surface: Coated
- Tightening Torque [Nm]: 150
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£ 62,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 02.35.099
Details
- Fitting Position: Front Axle
- Diameter [mm]: 330
- Brake Disc Type: perforated/vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 32
- for OE number: 220 421 2512
- Drilled: yes
- Condition: New
More
£ 67,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 10 92 4957
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 330
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 59,3
- Brake Disc Thickness [mm]: 26
- Minimum thickness [mm]: 24
- Weight [kg]: 9,683
- Surface: Coated
- Special Purpose Vehicle: not for armoured vehicles
- Drilled: no
- Condition: New
More
£ 67,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 10 92 1086
Details
- Fitting Position: Front Axle
- Diameter [mm]: 330
- Brake Disc Type: perforated/vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 76
- Brake Disc Thickness [mm]: 32
- Minimum thickness [mm]: 30
- Centering Diameter [mm]: 67
- Weight [kg]: 10,1
- Surface: Coated
- Number of mounting bores: 1
- Drilled: yes
- Condition: New
More
£ 70,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 21086
Details
- Fitting Position: Front Axle
- Diameter [mm]: 330
- Brake Disc Type: perforated/vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 76
- Brake Disc Thickness [mm]: 32
- Minimum thickness [mm]: 30
- Centering Diameter [mm]: 67
- Weight [kg]: 10,1
- Surface: Coated
- Number of mounting bores: 1
- Observe service information
- Drilled: yes
- Condition: New
More
£ 71,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24.0122-0213.1
Details
-
- Special Purpose Vehicle: not for armoured vehicles
- Fitting Position: Rear Axle
- Diameter [mm]: 315,0
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Brake Disc Thickness [mm]: 22,0
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67,0
- Inner Diameter [mm]: 180,0
- Height [mm]: 59,3
- Surface: Coated
- Machining: Alloyed/High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0296/2514
- Bore Diameter [mm]: 15,0
- Drilled: no
- Condition: New
More
£ 72,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADU174344
Details
- Fitting Position: Front Axle
- Diameter [mm]: 330
- Brake Disc Type: perforated/vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 76
- Brake Disc Thickness [mm]: 32
- Minimum thickness [mm]: 30
- Centering Diameter [mm]: 67
- Weight [kg]: 10,1
- Surface: Coated
- Number of mounting bores: 1
- Observe service information
- Drilled: yes
- Condition: New
More
£ 73,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24.0132-0125.1
Details
-
- Special Purpose Vehicle: not for armoured vehicles
- Fitting Position: Front Axle
- Diameter [mm]: 345,0
- Brake Disc Type: perforated/vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Brake Disc Thickness [mm]: 32,0
- Minimum thickness [mm]: 30,0
- Centering Diameter [mm]: 67,0
- Inner Diameter [mm]: 154,0
- Height [mm]: 76
- Surface: Coated
- Machining: Alloyed/High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0640/1055
- Bore Diameter [mm]: 15,0
- Drilled: yes
- Condition: New
More
£ 82,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8DD 355 110-181
Details
- Fitting Position: Front Axle
- Diameter [mm]: 360
- Brake Disc Type: Perforated, internally vented
- Hole Arrangement/Number: 05/06
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 36
- Minimum thickness [mm]: 34
- Centering Diameter [mm]: 67
- Inner Diameter [mm]: 154,2
- Height [mm]: 76
- Weight [kg]: 16,5
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: yes
- Condition: New
More
£ 85,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 92108800
Details
-
- Fitting Position: Front Axle
- Country Specific Design: Japan, Australia
- Diameter [mm]: 345
- Brake Disc Type: internally vented, Perforated
- Hole Arrangement/Number: 05/06
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 32
- Minimum thickness [mm]: 30
- Centering Diameter [mm]: 67
- Inner Diameter [mm]: 154,2
- Height [mm]: 76
- Weight [kg]: 12,5
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 35,8
- Packaging width [cm]: 35,8
- Packaging height [cm]: 10,5
- Drilled: yes
- Condition: New
More
£ 86,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 44032
Details
- Fitting Position: Front Axle
- Diameter [mm]: 345
- Brake Disc Type: perforated/vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 76
- Brake Disc Thickness [mm]: 32
- Minimum thickness [mm]: 30
- Centering Diameter [mm]: 67
- Weight [kg]: 12,4
- Surface: Coated
- Machining: High-carbon
- Number of mounting bores: 1
- Observe service information
- Drilled: yes
- Condition: New
More
£ 89,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 18082
Details
-
- Fitting Position: Front Axle
- Special Purpose Vehicle: for armoured vehicles
- Diameter [mm]: 360
- Brake Disc Type: perforated/vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 32
- Minimum thickness [mm]: 30
- Centering Diameter [mm]: 67
- Hub Diameter [mm]: 169
- Height [mm]: 84,5
- Weight [kg]: 15,29
- Drilled: yes
- Condition: New
More
£ 93,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 44145
Details
- Fitting Position: Front Axle
- Diameter [mm]: 360
- Brake Disc Type: perforated/vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 76
- Brake Disc Thickness [mm]: 36
- Minimum thickness [mm]: 34
- Centering Diameter [mm]: 67
- Weight [kg]: 16,46
- Surface: Coated
- Machining: High-carbon
- Number of mounting bores: 1
- Observe service information
- Drilled: yes
- Condition: New
More
£ 102,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 10 94 4145
Details
- Fitting Position: Front Axle
- Diameter [mm]: 360
- Brake Disc Type: perforated/vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 76
- Brake Disc Thickness [mm]: 36
- Minimum thickness [mm]: 34
- Centering Diameter [mm]: 67
- Weight [kg]: 16,46
- Surface: Coated
- Machining: High-carbon
- Number of mounting bores: 1
- Drilled: yes
- Condition: New
More
£ 105,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 400.3615.20
Details
-
- Fitting Position: Front Axle
- Country Specific Design: Australia, USA, Japan
- Product line: COAT Z
- Diameter [mm]: 345
- Brake Disc Type: internally vented, Perforated
- Rim Hole Number: 5
- Hole Arrangement/Number: 6/5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 32
- Minimum thickness [mm]: 30
- Centering Diameter [mm]: 67
- Height [mm]: 76
- Weight [kg]: 12,48
- Surface: Coated
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: yes
- Condition: New
More
£ 111,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 10 94 4032
Details
- Fitting Position: Front Axle
- Diameter [mm]: 345,1
- Brake Disc Type: perforated/vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 76
- Brake Disc Thickness [mm]: 32
- Minimum thickness [mm]: 30
- Centering Diameter [mm]: 67
- Weight [kg]: 12,4
- Surface: Coated
- Machining: High-carbon
- Number of mounting bores: 1
- Drilled: yes
- Condition: New
More
£ 117,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 09.9463.11
Details
-
- Fitting Position: Front Axle
- Special Purpose Vehicle: for armoured vehicles
- Product line: COATED DISC LINE
- Diameter [mm]: 360
- Brake Disc Type: perforated/vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 32
- Minimum thickness [mm]: 30
- Centering Diameter [mm]: 67
- Height [mm]: 85
- Surface: Coated
- Tightening Torque [Nm]: 150
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: yes
- Condition: New
More
£ 128,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 92278303
Details
- Product line: PRO
- Fitting Position: Rear Axle
- Diameter [mm]: 330
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 05/07
- Wheel Bolt Bore Diameter [mm]: 17,1
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 26
- Minimum thickness [mm]: 24
- Centering Diameter [mm]: 67
- Inner Diameter [mm]: 180
- Height [mm]: 61,1
- Weight [kg]: 9,7
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 35,8
- Packaging width [cm]: 35,8
- Packaging height [cm]: 8,5
- Drilled: no
- Condition: New
More
£ 134,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DDF1662C-1
Details
-
- Fitting Position: Front Axle
- Special Purpose Vehicle: not for armoured vehicles
- Product line: PREMIER Coat+ disc
- Diameter [mm]: 360
- Brake Disc Type: perforated/vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 36
- Minimum thickness [mm]: 34
- Centering Diameter [mm]: 67
- Height [mm]: 76
- Weight [kg]: 16,76
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packaging length [cm]: 35
- Packaging width [cm]: 35
- Packaging height [cm]: 8,7
- Drilled: yes
- Condition: New
More
Article №: DDF1586C-1
Details
-
- Fitting Position: Front Axle
- Special Purpose Vehicle: for armoured vehicles
- Product line: PREMIER Coat+ disc
- Diameter [mm]: 360
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 32
- Minimum thickness [mm]: 30
- Centering Diameter [mm]: 67
- Height [mm]: 84,5
- Weight [kg]: 14,79
- Surface: Coated
- Tightening Torque [Nm]: 150
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packaging length [cm]: 36
- Packaging width [cm]: 36
- Packaging height [cm]: 8,5
- Drilled: no
- Condition: New
More
Article №: 09.C943.11
Details
-
- Fitting Position: Front Axle
- Special Purpose Vehicle: not for armoured vehicles
- Diameter [mm]: 360
- Brake Disc Type: perforated/vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 36
- Minimum thickness [mm]: 34
- Centering Diameter [mm]: 67
- Height [mm]: 76
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: yes
- Condition: New
More
Showing 25 out of 101 products
Show the next items
- 1
- 2
- 3
- 4
- 5
