Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs W140 S280 (140.028) 193 hp Petrol
- Brake pads W140 S280 (140.028) 193 hp Petrol
- Brake caliper W140 S280 (140.028) 193 hp Petrol
- Drum brake W140 S280 (140.028) 193 hp Petrol
- ABS sensor W140 S280 (140.028) 193 hp Petrol
- Brake caliper repair kit W140 S280 (140.028) 193 hp Petrol
- Handbrake W140 S280 (140.028) 193 hp Petrol
- Brake pad wear sensor W140 S280 (140.028) 193 hp Petrol
- Brake caliper carrier W140 S280 (140.028) 193 hp Petrol
- Brake shoes W140 S280 (140.028) 193 hp Petrol
- Brake hose S-Class S280 (140.028) 193 hp Petrol
- Master cylinder S-Class S280 (140.028) 193 hp Petrol
- Handbrake cable S-Class S280 (140.028) 193 hp Petrol
- Guide sleeve kit, brake caliper S-Class S280 (140.028) 193 hp Petrol
- Brake fluid S-Class S280 (140.028) 193 hp Petrol
- Handbrake shoes S-Class S280 (140.028) 193 hp Petrol
- Brake pad fitting kit S-Class S280 (140.028) 193 hp Petrol
- Brake servo S-Class S280 (140.028) 193 hp Petrol
- Accessory kit, brake shoes S-Class S280 (140.028) 193 hp Petrol
- Brake pads and discs S-Class S280 (140.028) 193 hp Petrol
- Brake light switch S-Class S280 (140.028) 193 hp Petrol
- Brake shoe adjuster S-Class S280 (140.028) 193 hp Petrol
- Brake caliper piston S-Class S280 (140.028) 193 hp Petrol
- Brake disc bolts S-Class S280 (140.028) 193 hp Petrol
- Master cylinder repair kit S-Class S280 (140.028) 193 hp Petrol
- Lateral and longitudinal acceleration sensor S-Class S280 (140.028) 193 hp Petrol
- Abs pump S-Class S280 (140.028) 193 hp Petrol
- Control unit, brake / driving dynamics S-Class S280 (140.028) 193 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs W140 S 280 2.8 (140.028) 193 hp Petrol
Article №: 82B0980
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 289,8
- Brake Disc Type: solid
- Number of Holes: 5/7
- Wheel Bolt Bore Diameter [mm]: 17
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 67
- Height [mm]: 59,7
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£28,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0626
Details
- Fitting Position: Front Axle
- Diameter [mm]: 320
- Brake Disc Type: Vented
- Number of Holes: 5/10
- Wheel Bolt Bore Diameter [mm]: 15,2
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 30
- Centering Diameter [mm]: 67
- Height [mm]: 82
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£42,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V30-40015
Details
-
- Construction Year to: 06/1993
- Construction Year from: 07/1993
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle
- Diameter [mm]: 290
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bore Diameter 1 [mm]: 17,1
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 9,8
- Centering Diameter [mm]: 67
- Height [mm]: 60
- Weight [kg]: 5,549
- Brake Disc Hub Height [mm]: 47,9
- Packaging width [cm]: 28,9
- Packaging height [cm]: 6
- Packaging Depth [cm]: 28,9
- Drilled: no
- Condition: New
More
£20,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 15798
Details
-
- Construction Year from: 07/1993
- Construction Year to: 06/1993
- Fitting Position: Rear Axle
- Diameter [mm]: 290
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 9,8
- Weight [kg]: 5,5
- Drilled: no
- Condition: New
More
£29,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 16111
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 290
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 9,8
- Centering Diameter [mm]: 67
- Hub Diameter [mm]: 168
- Height [mm]: 60
- Weight [kg]: 5,47
- Drilled: no
- Condition: New
More
£32,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 08131
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 290
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 60
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 9,8
- Centering Diameter [mm]: 67
- Surface: Coated
- Number of mounting bores: 2
- Observe service information
- Drilled: no
- Condition: New
More
£32,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 986 478 607
Details
-
- Construction Year to: 09/1998
- Fitting Position: Rear Axle
- Diameter [mm]: 290
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 9,8
- Centering Diameter [mm]: 67
- Height [mm]: 59,7
- Surface: Coated
- Machining: High-carbon
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 17
- Drilled: no
- Condition: New
More
£33,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DF2594
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 290
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 9,8
- Centering Diameter [mm]: 67
- Height [mm]: 60
- Surface: Painted
- Thread Size: 17
- Colour: black
- Test Mark: E1 90R-02 C0204/0523
- Drilled: no
- Condition: New
More
£34,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADU174346
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 290
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 60
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 9,8
- Centering Diameter [mm]: 67
- Surface: Coated
- Number of mounting bores: 2
- Observe service information
- Drilled: no
- Condition: New
More
£36,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 08.5725.10
Details
- Product line: Prime
- Fitting Position: Rear Axle
- Diameter [mm]: 290
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 9,8
- Centering Diameter [mm]: 67
- Height [mm]: 55
- Tightening Torque [Nm]: 150
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£37,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBD-0023859
Details
- Fitting Position: Front Axle
- Diameter [mm]: 310
- Brake Disc Type: internally vented
- Construction Year to: 09/1995
- Hole Arrangement/Number: 5/8
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 25,4
- Centering Diameter [mm]: 67
- Height [mm]: 82
- Thread Size: 17
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£38,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 015 521 2022
Details
-
- Construction Year from: 06/1993
- Construction Year to: 09/1995
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Front Axle
- Diameter [mm]: 310
- Brake Disc Type: Vented
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: 17
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 25,4
- Centering Diameter [mm]: 67
- Height [mm]: 82
- Required quantity: 2
- Drilled: no
- Condition: New
More
£38,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V30-80027
Details
- Supplementary Info: Original VAICO Quality
- Fitting Position: Front Axle
- Diameter [mm]: 310
- Brake Disc Type: Vented
- Construction Year to: 09/1995
- Rim Hole Number: 5
- Bore Ø 3 [mm]: 11,1
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 25,4
- Centering Diameter [mm]: 67
- Inner Diameter [mm]: 154
- Height [mm]: 82
- Weight [kg]: 9,595
- Brake Disc Hub Height [mm]: 54
- Packaging width [cm]: 32
- Packaging height [cm]: 16
- Packaging Depth [cm]: 32
- Drilled: no
- Condition: New
More
£39,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 02.35.035
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 290
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 12
- for OE number: 140 423 0612
- Drilled: no
- Condition: New
More
£39,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 92056900
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 290
- Brake Disc Type: solid
- Hole Arrangement/Number: 05/07
- Wheel Bolt Bore Diameter [mm]: 17
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 9,8
- Centering Diameter [mm]: 67
- Inner Diameter [mm]: 164
- Height [mm]: 59,7
- Weight [kg]: 5,5
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 31,3
- Packaging width [cm]: 31,3
- Packaging height [cm]: 14
- Drilled: no
- Condition: New
More
£40,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24.0112-0129.1
Details
-
- Construction Year from: 07/1993
- Fitting Position: Rear Axle
- Construction Year to: 06/1993
- Diameter [mm]: 290,0
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Brake Disc Thickness [mm]: 12,0
- Minimum thickness [mm]: 9,8
- Centering Diameter [mm]: 67,0
- Inner Diameter [mm]: 164,0
- Height [mm]: 60
- Surface: Coated
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0248/0738
- Bore Diameter [mm]: 17,0
- Drilled: no
- Condition: New
More
£44,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 10 90 8131
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 290
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 60
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 9,8
- Centering Diameter [mm]: 67
- Weight [kg]: 5,5
- Surface: Coated
- Number of mounting bores: 2
- Drilled: no
- Condition: New
More
£45,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 400.1423.20
Details
- Product line: COAT Z
- Fitting Position: Rear Axle
- Diameter [mm]: 290
- Brake Disc Type: solid
- Rim Hole Number: 5
- Hole Arrangement/Number: 7/5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 9,8
- Centering Diameter [mm]: 67
- Height [mm]: 55
- Weight [kg]: 5,5
- Surface: Coated
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£47,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 986 478 527
Details
-
- Construction Year to: 09/1998
- Fitting Position: Front Axle
- Diameter [mm]: 319,8
- Brake Disc Type: Vented, internally vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 27,4
- Centering Diameter [mm]: 67
- Height [mm]: 82
- Surface: Oiled
- Machining: Alloyed/High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15
- Drilled: no
- Condition: New
More
£53,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 08128
Details
- Fitting Position: Front Axle
- Diameter [mm]: 320
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 82
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 27,4
- Centering Diameter [mm]: 67
- Surface: Coated
- Number of mounting bores: 5
- Observe service information
- Drilled: no
- Condition: New
More
£54,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DF2595S
Details
-
- Fitting Position: Front Axle
- Construction Year from: 10/1995
- Diameter [mm]: 320
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 27,4
- Centering Diameter [mm]: 67
- Height [mm]: 82
- Surface: Painted
- Thread Size: 17
- Colour: black
- Test Mark: E190R-02C0176/0037
- Drilled: no
- Condition: New
More
£56,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8DD 355 102-691
Details
- Fitting Position: Front Axle
- Diameter [mm]: 320
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 05/10
- Wheel Bolt Bore Diameter [mm]: 15,2
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 27,4
- Centering Diameter [mm]: 67
- Inner Diameter [mm]: 154,5
- Height [mm]: 82
- Weight [kg]: 11,4
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
£56,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 015 521 2021
Details
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Front Axle
- Diameter [mm]: 320
- Brake Disc Type: Vented
- Number of Holes: 5
- Construction Year from: 10/1995
- Wheel Bolt Bore Diameter [mm]: 17
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 27,4
- Centering Diameter [mm]: 67
- Height [mm]: 82
- Required quantity: 2
- Drilled: no
- Condition: New
More
£56,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADU174375
Details
- Fitting Position: Front Axle
- Diameter [mm]: 320
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 82
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 27,4
- Centering Diameter [mm]: 67
- Surface: Coated
- Number of mounting bores: 5
- Observe service information
- Drilled: no
- Condition: New
More
£61,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 16110
Details
-
- Fitting Position: Front Axle
- Construction Year to: 09/1995
- Diameter [mm]: 310
- Brake Disc Type: Vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 25,4
- Centering Diameter [mm]: 67
- Hub Diameter [mm]: 165
- Height [mm]: 82
- Weight [kg]: 8,75
- Drilled: no
- Condition: New
More
£65,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 127 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
