Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs Mercedes W126 260SE (126.020) 166 hp Petrol
- Brake pads Mercedes W126 260SE (126.020) 166 hp Petrol
- Brake caliper Mercedes W126 260SE (126.020) 166 hp Petrol
- Drum brake Mercedes W126 260SE (126.020) 166 hp Petrol
- ABS sensor Mercedes W126 260SE (126.020) 166 hp Petrol
- Brake caliper repair kit Mercedes W126 260SE (126.020) 166 hp Petrol
- Handbrake Mercedes W126 260SE (126.020) 166 hp Petrol
- Brake disc back plate Mercedes W126 260SE (126.020) 166 hp Petrol
- Brake shoes Mercedes W126 260SE (126.020) 166 hp Petrol
- Brake pad wear sensor Mercedes W126 260SE (126.020) 166 hp Petrol
- Master cylinder S-Class 260SE (126.020) 166 hp Petrol
- Brake caliper carrier S-Class 260SE (126.020) 166 hp Petrol
- Brake hose S-Class 260SE (126.020) 166 hp Petrol
- Handbrake cable S-Class 260SE (126.020) 166 hp Petrol
- Vacuum pump S-Class 260SE (126.020) 166 hp Petrol
- Guide sleeve kit, brake caliper S-Class 260SE (126.020) 166 hp Petrol
- Handbrake shoes S-Class 260SE (126.020) 166 hp Petrol
- Brake fluid S-Class 260SE (126.020) 166 hp Petrol
- Brake pad fitting kit S-Class 260SE (126.020) 166 hp Petrol
- Brake servo S-Class 260SE (126.020) 166 hp Petrol
- Accessory kit, brake shoes S-Class 260SE (126.020) 166 hp Petrol
- Brake pads and discs S-Class 260SE (126.020) 166 hp Petrol
- Brake light switch S-Class 260SE (126.020) 166 hp Petrol
- Brake shoe adjuster S-Class 260SE (126.020) 166 hp Petrol
- Brake caliper piston S-Class 260SE (126.020) 166 hp Petrol
- Brake pipe S-Class 260SE (126.020) 166 hp Petrol
- Vacuum hose S-Class 260SE (126.020) 166 hp Petrol
- Brake disc bolts S-Class 260SE (126.020) 166 hp Petrol
- Master cylinder repair kit S-Class 260SE (126.020) 166 hp Petrol
- Overvoltage protection relay, ABS S-Class 260SE (126.020) 166 hp Petrol
- Control unit, brake / driving dynamics S-Class 260SE (126.020) 166 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs Mercedes W126 260 SE (126.020) 166 hp Petrol
Article №: 82B0684
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 278,8
- Brake Disc Type: solid
- Number of Holes: 5/7
- Wheel Bolt Bore Diameter [mm]: 15
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,3
- Centering Diameter [mm]: 67
- Inner Diameter [mm]: 160
- Height [mm]: 71,5
- Surface: Uncoated
- Material: Cast Iron
- Bore Diameter [mm]: 15
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-49%
compared to RRP:
£ 42,50
£ 21,61
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0875
Details
- Fitting Position: Front Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Number of Holes: 5/10
- Wheel Bolt Bore Diameter [mm]: 15,1
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 27,9
- Minimum thickness [mm]: 25,4
- Centering Diameter [mm]: 80
- Inner Diameter [mm]: 145,3
- Height [mm]: 68,1
- Surface: Uncoated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-69%
compared to RRP:
£ 70,70
£ 21,71
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0426
Details
- Fitting Position: Front Axle
- Diameter [mm]: 283,7
- Brake Disc Type: Vented
- Number of Holes: 5/8
- Wheel Bolt Bore Diameter [mm]: 15,1
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 21,8
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 154,4
- Inner Diameter [mm]: 154,4
- Height [mm]: 43,4
- Surface: Uncoated
- Brakes-/Drive Dynamics Articles: for ASR, ETS
- Thread Size: 15,6
- Colour: black
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-46%
compared to RRP:
£ 51,90
£ 27,59
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBD-0022834
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 278,8
- Brake Disc Type: solid
- Number of Holes: 5/7
- Wheel Bolt Bore Diameter [mm]: 15
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,3
- Centering Diameter [mm]: 67
- Inner Diameter [mm]: 160
- Height [mm]: 71,5
- Surface: Uncoated
- Material: Cast Iron
- Bore Diameter [mm]: 15
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-49%
compared to RRP:
£ 42,50
£ 21,61
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 08506
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 279
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 69,5
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,3
- Centering Diameter [mm]: 67
- Weight [kg]: 4,27
- Surface: Coated
- Number of mounting bores: 2
- Observe service information
- Drilled: no
- Condition: New
More
-70%
compared to RRP:
£ 73,98
£ 22,07
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 15736
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 279
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,3
- Centering Diameter [mm]: 67
- Hub Diameter [mm]: 168
- Height [mm]: 72
- Weight [kg]: 4,28
- Surface: Coated
- Drilled: no
- Condition: New
More
-54%
compared to RRP:
£ 49,47
£ 22,53
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BG2240
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 279
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,3
- Centering Diameter [mm]: 67
- Height [mm]: 69,5
- Surface: Oiled
- Test Mark: E1 90R-02C0241/0160
- Drilled: no
- Condition: New
More
£ 22,53
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 015 523 0018
Details
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Rear Axle
- Diameter [mm]: 279
- Brake Disc Type: solid
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: 15
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,3
- Centering Diameter [mm]: 67
- Height [mm]: 72
- Required quantity: 2
- Drilled: no
- Condition: New
More
-20%
compared to RRP:
£ 28,85
£ 22,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 08.1395.40
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 279
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,3
- Centering Diameter [mm]: 67
- Height [mm]: 70
- Tightening Torque [Nm]: 120
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£ 23,45
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DDF003
Details
- Product line: PREMIER
- Fitting Position: Rear Axle
- Diameter [mm]: 279
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,3
- Centering Diameter [mm]: 67
- Height [mm]: 69,5
- Weight [kg]: 9,3
- Surface: Oiled
- Tightening Torque [Nm]: 120
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Packing Type: Box
- Packaging length [cm]: 28
- Packaging width [cm]: 28
- Packaging height [cm]: 14,8
- Drilled: no
- Condition: New
More
£ 23,45
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 561344JC
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 279
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,3
- Centering Diameter [mm]: 67
- Height [mm]: 69,5
- Weight [kg]: 9,3
- Surface: Coated
- Tightening Torque [Nm]: 120
- Version: JC
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Packing Type: Box
- Packaging length [cm]: 30
- Packaging width [cm]: 30
- Packaging height [cm]: 15,5
- Drilled: no
- Condition: New
More
£ 23,91
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0684P
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 279
- Brake Disc Type: solid
- Hole Arrangement/Number: 05/07
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,3
- Centering Diameter [mm]: 67
- Height [mm]: 71,8
- Weight [kg]: 4,3
- Supplementary Article / Supplementary Info Info 2: without wheel studs, without wheel hub
- Drilled: no
- Condition: New
More
£ 24,17
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 561344CH
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 279
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,3
- Centering Diameter [mm]: 67
- Height [mm]: 69,5
- Weight [kg]: 9,3
- Tightening Torque [Nm]: 120
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packing Type: Box
- Packaging length [cm]: 28
- Packaging width [cm]: 28
- Packaging height [cm]: 14,7
- Drilled: no
- Condition: New
More
-64%
compared to RRP:
£ 67,96
£ 24,37
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DF2563
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 278
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 7,3
- Centering Diameter [mm]: 67
- Height [mm]: 56,3
- Surface: Painted
- Thread Size: 15
- Colour: black
- Test Mark: E190R-02C0204/0525
- Drum diameter [mm]: 164
- Drilled: no
- Condition: New
More
-68%
compared to RRP:
£ 78,56
£ 24,37
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADU174318
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 279
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 70
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,3
- Centering Diameter [mm]: 67
- Weight [kg]: 4,27
- Surface: Coated
- Number of mounting bores: 2
- Observe service information
- Drilled: no
- Condition: New
More
-74%
compared to RRP:
£ 95,98
£ 24,37
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 400.1409.20
Details
- Product line: COAT Z
- Fitting Position: Rear Axle
- Diameter [mm]: 279
- Brake Disc Type: solid
- Rim Hole Number: 5
- Hole Arrangement/Number: 7/5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,3
- Centering Diameter [mm]: 67
- Height [mm]: 72
- Weight [kg]: 4,3
- Surface: Coated
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Condition: New
More
-64%
compared to RRP:
£ 67,97
£ 24,37
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBD-0022110
Details
- Fitting Position: Front Axle
- Diameter [mm]: 283,7
- Brake Disc Type: Vented
- Number of Holes: 5/8
- Wheel Bolt Bore Diameter [mm]: 15,1
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 21,8
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 154,4
- Inner Diameter [mm]: 154,4
- Height [mm]: 43,4
- Surface: Uncoated
- Brakes-/Drive Dynamics Articles: for ASR, ETS
- Thread Size: 15,6
- Colour: black
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-50%
compared to RRP:
£ 51,90
£ 25,75
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8DD 355 100-991
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 279
- Brake Disc Type: solid
- Hole Arrangement/Number: 05/07
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,3
- Centering Diameter [mm]: 67
- Height [mm]: 71,8
- Weight [kg]: 4,3
- Technical Information Number: 52101
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
-68%
compared to RRP:
£ 83,04
£ 25,75
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: M2031PR
Details
-
- Construction Year to: 03/1991
- Fitting Position: Rear Axle
- Diameter [mm]: 279
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,3
- Centering Diameter [mm]: 67
- Height [mm]: 70
- Surface: Coated
- Condition: New
More
£ 26,21
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: M2031P
Details
-
- Construction Year to: 03/1991
- Fitting Position: Rear Axle
- Diameter [mm]: 279
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,3
- Centering Diameter [mm]: 67
- Height [mm]: 70
- Drilled: no
- Condition: New
More
£ 26,67
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V30-40002
Details
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle
- Diameter [mm]: 279
- Brake Disc Type: solid
- Construction Year to: 03/1991
- Rim Hole Number: 5
- Bore Diameter 1 [mm]: 15,1
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,3
- Centering Diameter [mm]: 67
- Height [mm]: 71,7
- Weight [kg]: 5,104
- Brake Disc Hub Height [mm]: 62
- Packaging width [cm]: 30
- Packaging height [cm]: 15
- Packaging Depth [cm]: 30
- fulfils ECE norm: R90
- Drilled: no
- Condition: New
More
-62%
compared to RRP:
£ 70,38
£ 26,67
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-0844
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 279
- Brake Disc Type: solid
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,3
- Centering Diameter [mm]: 67
- Height [mm]: 71,8
- Technical Information Number: 98200 0326 0 1
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Packaging length [cm]: 31,5
- Packaging width [cm]: 30
- Packaging height [cm]: 16
- Drilled: no
- Condition: New
More
£ 27,59
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V30-40003
Details
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle, Front Axle
- Diameter [mm]: 273
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 12,6
- Minimum thickness [mm]: 11
- Centering Diameter [mm]: 69,5
- Height [mm]: 63,3
- Weight [kg]: 5,901
- Brake Disc Hub Height [mm]: 50,5
- Packaging width [cm]: 28
- Packaging height [cm]: 13
- Packaging Depth [cm]: 28
- Drilled: no
- Condition: New
More
£ 28,51
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6270.00
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 278
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 7,3
- Centering Diameter [mm]: 67
- Height [mm]: 56,2
- Weight [kg]: 4,01
- Drilled: no
- Condition: New
More
£ 29,89
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-0720
Details
- Fitting Position: Front Axle
- Diameter [mm]: 284
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Height [mm]: 43,4
- Weight [kg]: 5,9
- Braking/Drive Dynamics: for vehicles with ASR, for vehicles with ETS
- Drilled: no
- Condition: New
More
£ 34,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 129 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
