Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs Mercedes W126 260SE (126.020) 160 hp Petrol
- Brake pads Mercedes W126 260SE (126.020) 160 hp Petrol
- Brake caliper Mercedes W126 260SE (126.020) 160 hp Petrol
- Drum brake Mercedes W126 260SE (126.020) 160 hp Petrol
- ABS sensor Mercedes W126 260SE (126.020) 160 hp Petrol
- Brake caliper repair kit Mercedes W126 260SE (126.020) 160 hp Petrol
- Handbrake Mercedes W126 260SE (126.020) 160 hp Petrol
- Brake disc back plate Mercedes W126 260SE (126.020) 160 hp Petrol
- Brake caliper carrier Mercedes W126 260SE (126.020) 160 hp Petrol
- Brake pad wear sensor Mercedes W126 260SE (126.020) 160 hp Petrol
- Brake shoes S-Class 260SE (126.020) 160 hp Petrol
- Brake hose S-Class 260SE (126.020) 160 hp Petrol
- Master cylinder S-Class 260SE (126.020) 160 hp Petrol
- Handbrake cable S-Class 260SE (126.020) 160 hp Petrol
- Vacuum pump S-Class 260SE (126.020) 160 hp Petrol
- Guide sleeve kit, brake caliper S-Class 260SE (126.020) 160 hp Petrol
- Brake fluid S-Class 260SE (126.020) 160 hp Petrol
- Handbrake shoes S-Class 260SE (126.020) 160 hp Petrol
- Brake pad fitting kit S-Class 260SE (126.020) 160 hp Petrol
- Brake servo S-Class 260SE (126.020) 160 hp Petrol
- Accessory kit, brake shoes S-Class 260SE (126.020) 160 hp Petrol
- Brake pads and discs S-Class 260SE (126.020) 160 hp Petrol
- Brake light switch S-Class 260SE (126.020) 160 hp Petrol
- Brake shoe adjuster S-Class 260SE (126.020) 160 hp Petrol
- Brake pipe S-Class 260SE (126.020) 160 hp Petrol
- Brake caliper piston S-Class 260SE (126.020) 160 hp Petrol
- Vacuum hose S-Class 260SE (126.020) 160 hp Petrol
- Brake disc bolts S-Class 260SE (126.020) 160 hp Petrol
- Master cylinder repair kit S-Class 260SE (126.020) 160 hp Petrol
- Overvoltage protection relay, ABS S-Class 260SE (126.020) 160 hp Petrol
- Control unit, brake / driving dynamics S-Class 260SE (126.020) 160 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs Mercedes W126 260 SE (126.020) 160 hp Petrol
Article №: BDC3507
Details
-
- Fitting Position: Front Axle
- Brake System: Ate
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 104
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 25,4
- Centering Diameter [mm]: 80
- Height [mm]: 68
- Drilled: no
- Condition: New
More
Article №: 92032600
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 279
- Brake Disc Type: solid
- Hole Arrangement/Number: 05/07
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,3
- Centering Diameter [mm]: 67
- Inner Diameter [mm]: 160
- Height [mm]: 71,8
- Weight [kg]: 4,3
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 29,3
- Packaging width [cm]: 29,3
- Packaging height [cm]: 16,5
- Drilled: no
- Condition: New
More
£32,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6280.00
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 279
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,3
- Centering Diameter [mm]: 67
- Height [mm]: 69,5
- Weight [kg]: 4,5
- Test Mark: K.B.A.: 61210
- Drilled: no
- Condition: New
More
£33,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24.0110-0185.1
Details
-
- Construction Year to: 03/1991
- Fitting Position: Rear Axle
- Diameter [mm]: 279
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Brake Disc Thickness [mm]: 10,0
- Minimum thickness [mm]: 8,3
- Centering Diameter [mm]: 67,0
- Inner Diameter [mm]: 160,0
- Height [mm]: 71,7
- Surface: Coated
- MAPP code available
- Test Mark: E1 90R-02C0248/0678
- Bore Diameter [mm]: 15,0
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£33,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DF1574
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 279
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,3
- Centering Diameter [mm]: 67
- Height [mm]: 71,7
- Surface: Painted
- Thread Size: 15
- Colour: black
- Test Mark: E190R-02C0204/0525
- Drum diameter [mm]: 160
- Drilled: no
- Condition: New
More
£35,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BG2372
Details
- Fitting Position: Front Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 25,4
- Centering Diameter [mm]: 80
- Height [mm]: 68,2
- Surface: Oiled
- Test Mark: E1 90R-02C0074/0090
- Drilled: no
- Condition: New
More
£35,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 06857
Details
- Fitting Position: Front Axle
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 68
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 25,4
- Centering Diameter [mm]: 80
- Surface: Coated
- Number of mounting bores: 5
- Observe service information
- Drilled: no
- Condition: New
More
£37,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 986 478 197
Details
- Fitting Position: Front Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 25,4
- Centering Diameter [mm]: 80
- Height [mm]: 68,3
- Surface: Oiled
- Machining: Alloyed/High-carbon
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15,2
- Drilled: no
- Condition: New
More
£37,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24.0128-0102.1
Details
-
- Construction Year to: 03/1991
- Fitting Position: Front Axle
- Diameter [mm]: 300,0
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Brake Disc Thickness [mm]: 28,0
- Minimum thickness [mm]: 25,4
- Centering Diameter [mm]: 80,0
- Inner Diameter [mm]: 145,0
- Height [mm]: 68,3
- Surface: Coated
- Machining: Alloyed/High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0115/0033
- Bore Diameter [mm]: 15,0
- Drilled: no
- Condition: New
More
£43,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 09.4928.10
Details
- Product line: Prime
- Fitting Position: Front Axle
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 27,8
- Minimum thickness [mm]: 25,4
- Centering Diameter [mm]: 80
- Height [mm]: 68
- Tightening Torque [Nm]: 130
- Drilled: no
- Condition: New
More
£44,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DF1586
Details
- Fitting Position: Front Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 25,4
- Centering Diameter [mm]: 80
- Height [mm]: 68,2
- Surface: Painted
- Thread Size: 15
- Colour: black
- Test Mark: E1 90R-02 C0176/0492
- Drilled: no
- Condition: New
More
£47,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 02.35.019
Details
- Fitting Position: Front Axle
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 28
- for OE number: 126 421 0512
- Drilled: no
- Condition: New
More
£49,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 673266
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 279
- Brake Disc Type: solid
- Rim Hole Number: 5
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,3
- Height [mm]: 72
- Weight [kg]: 9,29
- Surface: Coated
- Machining: High-carbon
- Number of mounting bores: 1
- No. of holes 1: 1
- Test Mark: ECE-R90
- Observe technical data
- Supplementary Article / Supplementary Info Info 2: without ABS sensor ring, without integrated wheel bearing
- Condition: New
More
£50,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 15794
Details
- Fitting Position: Front Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 25,4
- Centering Diameter [mm]: 80
- Hub Diameter [mm]: 154
- Height [mm]: 68,1
- Weight [kg]: 7,95
- Drilled: no
- Condition: New
More
£53,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 10 90 6857
Details
- Fitting Position: Front Axle
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 68
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 25,4
- Centering Diameter [mm]: 80
- Weight [kg]: 7,3
- Surface: Coated
- Number of mounting bores: 5
- Drilled: no
- Condition: New
More
£55,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6345.10
Details
- Fitting Position: Front Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 27,8
- Minimum thickness [mm]: 25,4
- Centering Diameter [mm]: 80
- Height [mm]: 68,2
- Weight [kg]: 7,95
- Drilled: no
- Condition: New
More
£59,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 400.1408.20
Details
- Product line: COAT Z
- Fitting Position: Front Axle
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Hole Arrangement/Number: 10/5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 25,4
- Centering Diameter [mm]: 80
- Height [mm]: 68
- Weight [kg]: 7,7
- Surface: Coated
- Drilled: no
- Condition: New
More
£63,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 400.1409.52
Details
- Product line: SPORT COAT Z
- Fitting Position: Rear Axle
- Diameter [mm]: 279
- Brake Disc Type: solid, Perforated
- Rim Hole Number: 5
- Hole Arrangement/Number: 7/5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,3
- Centering Diameter [mm]: 67
- Height [mm]: 72
- Weight [kg]: 4,3
- Surface: Coated
- Test Mark: ECE R90 APPROVED
- Drilled: yes
- Condition: New
More
£69,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BS-2800C
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 279
- Brake Disc Type: solid
- Hole Arrangement/Number: 5/7
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,3
- Centering Diameter [mm]: 67
- Height [mm]: 69,5
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
Article №: 1363102109
Details
- Supplementary Info: QH
- Fitting Position: Rear Axle
- Diameter [mm]: 279
- Brake Disc Type: solid
- Hole Arrangement/Number: 7/5
- Brake Disc Thickness [mm]: 10
- Drilled: no
- Condition: New
More
£14,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: BS-2800
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 279
- Brake Disc Type: solid
- Hole Arrangement/Number: 5/7
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,3
- Centering Diameter [mm]: 67
- Height [mm]: 69,5
- Drilled: no
- Condition: New
More
£14,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 1363100800
Details
- Fitting Position: Front Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Hole Arrangement/Number: 10/5
- Brake Disc Thickness [mm]: 28
- Drilled: no
- Condition: New
More
£18,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: BD1127
Details
- Fitting Position: Rear Axle
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø 1 [mm]: 112
- Brake Disc Thickness [mm]: 9,9
- Hub Diameter 1 [mm]: 67
- Drilled: no
- Condition: New
More
£19,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 800-044
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 279
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 67
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,3
- Height [mm]: 72
- Drilled: no
- Condition: New
More
£19,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: C4M010ABE
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 279
- Brake Disc Type: solid
- Number of Holes: 5
- Thickness [mm]: 10
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,3
- Centering Diameter [mm]: 67
- Height [mm]: 69,5
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£22,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Showing 25 out of 109 products
Show the next items
- 1
- 2
- 3
- 4
- 5
