Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs Mercedes C140 500SEC / CL500 (140.070) 320 hp Petrol
- Brake pads Mercedes C140 500SEC / CL500 (140.070) 320 hp Petrol
- Brake caliper Mercedes C140 500SEC / CL500 (140.070) 320 hp Petrol
- Drum brake Mercedes C140 500SEC / CL500 (140.070) 320 hp Petrol
- ABS sensor Mercedes C140 500SEC / CL500 (140.070) 320 hp Petrol
- Brake caliper repair kit Mercedes C140 500SEC / CL500 (140.070) 320 hp Petrol
- Handbrake Mercedes C140 500SEC / CL500 (140.070) 320 hp Petrol
- Brake shoes Mercedes C140 500SEC / CL500 (140.070) 320 hp Petrol
- Brake pad wear sensor Mercedes C140 500SEC / CL500 (140.070) 320 hp Petrol
- Master cylinder Mercedes C140 500SEC / CL500 (140.070) 320 hp Petrol
- Brake caliper carrier S-Class 500SEC / CL500 (140.070) 320 hp Petrol
- Brake hose S-Class 500SEC / CL500 (140.070) 320 hp Petrol
- Handbrake cable S-Class 500SEC / CL500 (140.070) 320 hp Petrol
- Guide sleeve kit, brake caliper S-Class 500SEC / CL500 (140.070) 320 hp Petrol
- Handbrake shoes S-Class 500SEC / CL500 (140.070) 320 hp Petrol
- Brake fluid S-Class 500SEC / CL500 (140.070) 320 hp Petrol
- Brake pad fitting kit S-Class 500SEC / CL500 (140.070) 320 hp Petrol
- Brake servo S-Class 500SEC / CL500 (140.070) 320 hp Petrol
- Accessory kit, brake shoes S-Class 500SEC / CL500 (140.070) 320 hp Petrol
- Brake pads and discs S-Class 500SEC / CL500 (140.070) 320 hp Petrol
- Brake light switch S-Class 500SEC / CL500 (140.070) 320 hp Petrol
- Brake shoe adjuster S-Class 500SEC / CL500 (140.070) 320 hp Petrol
- Brake caliper piston S-Class 500SEC / CL500 (140.070) 320 hp Petrol
- Brake disc bolts S-Class 500SEC / CL500 (140.070) 320 hp Petrol
- Brake fluid reservoir S-Class 500SEC / CL500 (140.070) 320 hp Petrol
- Pressure switch, brake hydraulics S-Class 500SEC / CL500 (140.070) 320 hp Petrol
- Abs pump S-Class 500SEC / CL500 (140.070) 320 hp Petrol
- Lateral and longitudinal acceleration sensor S-Class 500SEC / CL500 (140.070) 320 hp Petrol
- Control unit, brake / driving dynamics S-Class 500SEC / CL500 (140.070) 320 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs Mercedes C140 500 SEC / CL 500 (140.070) 320 hp Petrol
Article №: BG3326
Details
-
- Fitting Position: Rear Axle
- for model code: CL500
- Diameter [mm]: 278
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 7,3
- Centering Diameter [mm]: 67
- Height [mm]: 55,4
- Test Mark: E1 90R-02C0344/1767
- Drilled: no
- Condition: New
More
£ 29,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 16112
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Hub Diameter [mm]: 168
- Height [mm]: 60
- Weight [kg]: 7,37
- Drilled: no
- Condition: New
More
£ 31,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 23-0521
Details
-
- Fitting Position: Rear Axle
- Construction Year to: 02/1999
- Diameter [mm]: 300,0
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 22,0
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67,0
- Height [mm]: 59,8
- Test Mark: ECE-R90
- Drilled: no
- Condition: New
More
£ 31,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 24013001001-PCS-MS
Details
-
- Construction Year from: 06/1996, 07/1993
- Construction Year to: 05/1996, 06/1993
- Fitting Position: Front Axle
- Diameter [mm]: 320
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 27,4
- Centering Diameter [mm]: 67
- Inner Diameter [mm]: 154,3
- Height [mm]: 82
- Surface: Coated
- Machining: Alloyed/High-carbon
- Bore Diameter [mm]: 15,2
- Condition: New
More
£ 32,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: BS4324
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 290
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 9,8
- Centering Diameter [mm]: 67
- Height [mm]: 59,7
- Test Mark: 90R-02C0241/0031
- Drilled: no
- Condition: New
More
£ 32,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: C4M003ABE-P
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 278
- Brake Disc Type: solid
- Number of Holes: 5
- Construction Year from: 07/1996
- Thickness [mm]: 9
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 7,3
- Centering Diameter [mm]: 67
- Height [mm]: 53,6
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£ 33,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: GH-423384
Details
- Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
- Diameter [mm]: 278
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 9
- Centering Diameter [mm]: 67
- Height [mm]: 53,5
- Thread Size: 13,6
- Drum diameter [mm]: 164
- Drilled: no
- Condition: New
More
£ 33,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 6467.00
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 278
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 7,3
- Centering Diameter [mm]: 67
- Height [mm]: 53,5
- Weight [kg]: 3,785
- Test Mark: K.B.A.: 61210
- Drilled: no
- Condition: New
More
£ 35,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 215 360
Details
-
- Fitting Position: Rear Axle
- Construction Year to: 08/1998
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 22
- Height [mm]: 55
- Condition: New
More
£ 35,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: V30-80028
Details
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Rim Hole Number: 5
- Bore Diameter 1 [mm]: 17,1
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Height [mm]: 60
- Weight [kg]: 8,023
- Brake Disc Hub Height [mm]: 38
- Packaging width [cm]: 32
- Packaging height [cm]: 12
- Packaging Depth [cm]: 32
- Drilled: no
- Condition: New
More
£ 38,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: C3M010ABE-P
Details
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Number of Holes: 5
- Construction Year from: 07/1996
- Thickness [mm]: 25
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22, 22,4
- Centering Diameter [mm]: 67
- Height [mm]: 46,5
- Surface: Coated
- Machining: High-carbon
- Wear Warning Contact: incl. wear warning contact
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£ 38,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 98386
Details
-
- Fitting Position: Rear Axle
- Construction Year to: 08/1998
- Fitting Position: A1
- Condition: New
More
£ 38,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 360406031800
Details
-
- Construction Year to: 12/1998
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 67
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19,4
- Height [mm]: 55
- Tightening Torque [Nm]: 11
- Drilled: no
- Condition: New
More
£ 40,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 09.5716.10
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Height [mm]: 55
- Tightening Torque [Nm]: 150
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£ 40,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: M2431V
Details
-
- Construction Year to: 08/1998
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Height [mm]: 60
- for article number: M2431V
- Drilled: no
- Condition: New
More
£ 40,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 02.35.060
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- for OE number: 140 423 0412
- Drilled: no
- Condition: New
More
£ 40,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: BG739
Details
-
- Fitting Position: Front Axle
- for model code: CL500
-
- Fitting Position: Front Axle
- Diameter [mm]: 320
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 27,4
- Centering Diameter [mm]: 67
- Height [mm]: 82
- Surface: Oiled
- Test Mark: E1 90R-02C0074/1596
- Drilled: no
- Condition: New
More
£ 41,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 8DD 355 102-711
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 05/07
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Height [mm]: 60
- Weight [kg]: 7,4
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
£ 43,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 800-413
Details
- Fitting Position: Front Axle
- Diameter [mm]: 320
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 67
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 27,4
- Height [mm]: 82
- Drilled: no
- Condition: New
More
£ 43,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 800-521
Details
-
- Construction Year to: 02/1999
- Fitting Position: Rear Axle
- Diameter [mm]: 300,0
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 67,0
- Brake Disc Thickness [mm]: 22,0
- Centering Diameter [mm]: 67,0
- Height [mm]: 59,8
- Test Mark: ECE-R90
- Drilled: no
- Condition: New
More
£ 44,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 561574J
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Height [mm]: 55
- Weight [kg]: 14,86
- Surface: Oiled
- Tightening Torque [Nm]: 150
- Version: J
- Test Mark: R90 Homologated
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Packing Type: Box
- Packaging length [cm]: 30,5
- Packaging width [cm]: 30,5
- Packaging height [cm]: 14
- Drilled: no
- Condition: New
More
£ 48,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: BS-3430
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Construction Year to: 12/1998
- Hole Arrangement/Number: 5/7
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Height [mm]: 55
- Drilled: no
- Condition: New
More
£ 48,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: V30-80052
Details
-
- Construction Year to: 06/1993, 05/1996
- Construction Year from: 07/1993, 06/1996
- Supplementary Info: Original VAICO Quality
- Fitting Position: Front Axle
- Diameter [mm]: 320
- Brake Disc Type: Vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 27,4
- Centering Diameter [mm]: 67
- Inner Diameter [mm]: 154,3
- Height [mm]: 82
- Weight [kg]: 11,62
- Brake Disc Hub Height [mm]: 52
- Packaging width [cm]: 34
- Packaging height [cm]: 17
- Packaging Depth [cm]: 34
- fulfils ECE norm: R90
- Drilled: no
- Condition: New
More
£ 50,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: BD1129
Details
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø 1 [mm]: 112
- Brake Disc Thickness [mm]: 30
- Hub Diameter 1 [mm]: 67
- Bolt Hole Circle Ø 2 [mm]: 112
- Drilled: no
- Condition: New
More
£ 51,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 6343.10
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Number of Holes: 5
- Construction Year to: 07/1996
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Height [mm]: 55
- Weight [kg]: 7,37
- Test Mark: K.B.A.: 61209
- Drilled: no
- Condition: New
More
£ 53,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Showing 25 out of 122 products
Show the next items
- 1
- 2
- 3
- 4
- 5
