Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs W212 E200 CGI (212.048, 212.148) 184 hp Petrol
- Brake pads W212 E200 CGI (212.048, 212.148) 184 hp Petrol
- Brake caliper W212 E200 CGI (212.048, 212.148) 184 hp Petrol
- Drum brake W212 E200 CGI (212.048, 212.148) 184 hp Petrol
- ABS sensor W212 E200 CGI (212.048, 212.148) 184 hp Petrol
- Brake caliper repair kit W212 E200 CGI (212.048, 212.148) 184 hp Petrol
- Handbrake W212 E200 CGI (212.048, 212.148) 184 hp Petrol
- Brake disc back plate W212 E200 CGI (212.048, 212.148) 184 hp Petrol
- Brake pad wear sensor W212 E200 CGI (212.048, 212.148) 184 hp Petrol
- Brake caliper carrier W212 E200 CGI (212.048, 212.148) 184 hp Petrol
- Brake shoes E-Class E200 CGI (212.048, 212.148) 184 hp Petrol
- Brake hose E-Class E200 CGI (212.048, 212.148) 184 hp Petrol
- Master cylinder E-Class E200 CGI (212.048, 212.148) 184 hp Petrol
- Handbrake cable E-Class E200 CGI (212.048, 212.148) 184 hp Petrol
- Vacuum pump E-Class E200 CGI (212.048, 212.148) 184 hp Petrol
- Guide sleeve kit, brake caliper E-Class E200 CGI (212.048, 212.148) 184 hp Petrol
- Handbrake shoes E-Class E200 CGI (212.048, 212.148) 184 hp Petrol
- Brake fluid E-Class E200 CGI (212.048, 212.148) 184 hp Petrol
- Brake pad fitting kit E-Class E200 CGI (212.048, 212.148) 184 hp Petrol
- Brake servo E-Class E200 CGI (212.048, 212.148) 184 hp Petrol
- Wheel cylinder E-Class E200 CGI (212.048, 212.148) 184 hp Petrol
- Accessory kit, brake shoes E-Class E200 CGI (212.048, 212.148) 184 hp Petrol
- Brake pads and discs E-Class E200 CGI (212.048, 212.148) 184 hp Petrol
- Brake light switch E-Class E200 CGI (212.048, 212.148) 184 hp Petrol
- Abs ring E-Class E200 CGI (212.048, 212.148) 184 hp Petrol
- Brake caliper piston E-Class E200 CGI (212.048, 212.148) 184 hp Petrol
- Brake disc bolts E-Class E200 CGI (212.048, 212.148) 184 hp Petrol
- Performance brake discs E-Class E200 CGI (212.048, 212.148) 184 hp Petrol
- High-performance brake pads E-Class E200 CGI (212.048, 212.148) 184 hp Petrol
- Lateral and longitudinal acceleration sensor E-Class E200 CGI (212.048, 212.148) 184 hp Petrol
- Abs pump E-Class E200 CGI (212.048, 212.148) 184 hp Petrol
- Control unit, brake / driving dynamics E-Class E200 CGI (212.048, 212.148) 184 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs W212 E 200 CGI 1.8 (212.048, 212.148) 184 hp Petrol
Article №: BDC5415
Details
-
- Fitting Position: Rear Axle
- Brake System: Ate
- Diameter [mm]: 300
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,3
- Centering Diameter [mm]: 67
- Height [mm]: 68,5
- Drilled: no
- Condition: New
More
£ 29,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 562213JC
Details
-
- Fitting Position: Rear Axle
- Paired product: 571989J
- Diameter [mm]: 300
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 9,3
- Centering Diameter [mm]: 67
- Brake System: ATE
- Height [mm]: 65,5
- Weight [kg]: 10,51
- Surface: Coated
- Tightening Torque [Nm]: 130
- Version: JC
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Packing Type: Box
- Packaging length [cm]: 33
- Packaging width [cm]: 33
- Packaging height [cm]: 16
- Drilled: no
- Condition: New
More
£ 32,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 22162
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 66
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20,5
- Centering Diameter [mm]: 67
- Weight [kg]: 7,4
- Surface: Coated
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Condition: New
More
£ 32,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 986 479 041
Details
-
- TecDoc Engine Number: M 271.860
- Construction Year to: 12/2013
- Fitting Position: Rear Axle
- Wheelbase: short wheelbase
- Diameter [mm]: 300
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,3
- Centering Diameter [mm]: 67
- Height [mm]: 68,3
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15,3
- Drilled: no
- Condition: New
More
£ 33,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADU174309
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 68
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,3
- Centering Diameter [mm]: 67
- Weight [kg]: 5,48
- Surface: Coated
- Number of mounting bores: 1
- Observe service information
- TecDoc Engine Number: M 271.860
- Drilled: no
- Condition: New
More
£ 34,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BG3758
Details
-
- Fitting Position: Rear Axle
- for model code: 212148
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Height [mm]: 68
- Surface: Oiled
- Test Mark: E1 90R-02C0957/2557
- Drilled: no
- Condition: New
More
£ 35,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0636P
Details
-
- Fitting Position: Rear Axle
- Vehicle type: 212048
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Number of Holes: 5/6
- Wheel Bolt Bore Diameter [mm]: 15,4
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 67
- Height [mm]: 67,2
- Surface: Coated
- Machining: High-carbon
- Material: Grey Cast Iron
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£ 37,26
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 562627CH
Details
-
- Fitting Position: Front Axle
- Vehicle Equipment: for vehicles without sports package
- Paired product: 573257CH
- Diameter [mm]: 295
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 25,4
- Centering Diameter [mm]: 67
- Height [mm]: 64,5
- Weight [kg]: 17,03
- Tightening Torque [Nm]: 130
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packing Type: Box
- Packaging length [cm]: 30,5
- Packaging width [cm]: 30,5
- Packaging height [cm]: 15
- Drilled: no
- Condition: New
More
£ 37,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V30-80050
Details
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Height [mm]: 68
- Weight [kg]: 7,86
- Brake Disc Hub Height [mm]: 46,2
- Packaging width [cm]: 32
- Packaging height [cm]: 15
- Packaging Depth [cm]: 32
- fulfils ECE norm: R90
- Drilled: no
- Condition: New
More
£ 39,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 15813
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,3
- Centering Diameter [mm]: 67
- Inner Diameter [mm]: 180
- Height [mm]: 65,5
- Weight [kg]: 5,1
- Drilled: no
- Condition: New
More
£ 40,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6787.00
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,3
- Centering Diameter [mm]: 67,1
- Height [mm]: 68,3
- Weight [kg]: 5,11
- Test Mark: K.B.A.: 61210
- Drilled: no
- Condition: New
More
£ 43,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: M2019PR
Details
-
- Fitting Position: Rear Axle
- Special Purpose Vehicle: not for taxis
- Diameter [mm]: 300
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 67
- Height [mm]: 68,5
- Surface: Coated
- Condition: New
More
£ 43,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8120 23163C
Details
-
- Fitting Position: Rear Axle
- for type code: 212048
- Product line: COATED
- Diameter [mm]: 300
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Surface: Coated
- Manufacturer Restriction: ATE
- Drilled: no
- Condition: New
More
£ 43,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 02.35.093
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- for OE number: 211 423 0712
- Drilled: no
- Condition: New
More
£ 44,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: M2002V
Details
-
- Fitting Position: Rear Axle
- Special Purpose Vehicle: for taxis
- Wheelbase: long wheelbase
- Diameter [mm]: 300
- Number of Holes: 5
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 67
- Height [mm]: 68
- Drilled: no
- Condition: New
More
£ 45,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 15813C
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,3
- Centering Diameter [mm]: 67
- Inner Diameter [mm]: 180
- Height [mm]: 65,5
- Surface: Coated
- Quality: Kreuzschliff
- Drilled: no
- Condition: New
More
£ 45,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 1363203200
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 22
- Surface: Coated
- Braking System: for vehicles with reinforced brakes
- Drilled: no
- Condition: New
More
£ 48,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-1953
Details
- Fitting Position: Front Axle
- Diameter [mm]: 295
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 25,4
- Centering Diameter [mm]: 67
- Height [mm]: 64,5
- Surface: Painted
- Machining: High-carbon
- Thread Size: 15,2
- Test Mark: E1 90R 02 C0176/0492
- Drilled: no
- Condition: New
More
£ 55,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 61-00-0514
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19,4
- Height [mm]: 65,5
- Drilled: no
- Condition: New
More
£ 55,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBD-0022242
Details
- Fitting Position: Front Axle
- Diameter [mm]: 322
- Brake Disc Type: perforated/vented
- Number of Holes: 5/6
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 32
- Centering Diameter [mm]: 67,1
- Height [mm]: 64,5
- Surface: Uncoated
- Machining: Untreated
- Vehicle Equipment: for vehicles with AMG Sports Package, for vehicles with sports package
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: yes
- Condition: New
More
£ 57,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: B130446
Details
-
- Fitting Position: Front Axle
- Vehicle Equipment: for vehicles without sports package, for vehicles without AMG sports package
- Diameter [mm]: 295
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 25,4
- Centering Diameter [mm]: 67
- Inner Diameter [mm]: 154,3
- Height [mm]: 64,5
- Bore Diameter [mm]: 15,2
- Drilled: no
- Condition: New
More
£ 57,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-2688
Details
-
- Fitting Position: Front Axle
- Vehicle Equipment: for vehicles without sports package
- Diameter [mm]: 322
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 32
- Minimum thickness [mm]: 29,4
- Centering Diameter [mm]: 67
- Height [mm]: 64,4
- Surface: Painted
- Thread Size: 15.5
- Test Mark: E1 90R-02 C0176/0558
- Thread Size 1: 15,3
- Thread Size 2: 9,1
- Drilled: no
- Condition: New
More
£ 58,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: T4270
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 67
- Height [mm]: 68
- Weight [kg]: 6,97
- Condition: New
More
£ 72,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCH20523
Details
-
- Fitting Position: Rear Axle
- Vehicle type: 212048
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Number of Holes: 5/6
- Wheel Bolt Bore Diameter [mm]: 15,4
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 67
- Height [mm]: 67,2
- Surface: Coated
- Machining: High-carbon
- Material: Grey Cast Iron
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£ 73,82
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCH20308
Details
-
- TecDoc Engine Number: M 271.860
- Construction Year to: 12/2013
- Fitting Position: Front Axle
- Wheelbase: short wheelbase
- Vehicle Equipment: for vehicles without sports package
- Fitting Position: Front Axle
- Diameter [mm]: 295,2
- Brake Disc Type: Vented
- Number of Holes: 5/6
- Wheel Bolt Bore Diameter [mm]: 15,4
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 28
- Centering Diameter [mm]: 67
- Height [mm]: 64,5
- Surface: Coated
- Machining: High-carbon
- Material: Grey Cast Iron
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£ 77,78
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 300 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- ...
- 11
- 12
