Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs W212 E400 (212.061) 333 hp Petrol
- Brake pads W212 E400 (212.061) 333 hp Petrol
- Brake caliper W212 E400 (212.061) 333 hp Petrol
- Drum brake W212 E400 (212.061) 333 hp Petrol
- ABS sensor W212 E400 (212.061) 333 hp Petrol
- Brake caliper repair kit W212 E400 (212.061) 333 hp Petrol
- Handbrake W212 E400 (212.061) 333 hp Petrol
- Brake disc back plate W212 E400 (212.061) 333 hp Petrol
- Brake shoes W212 E400 (212.061) 333 hp Petrol
- Brake pad wear sensor W212 E400 (212.061) 333 hp Petrol
- Master cylinder E-Class E400 (212.061) 333 hp Petrol
- Brake caliper carrier E-Class E400 (212.061) 333 hp Petrol
- Brake hose E-Class E400 (212.061) 333 hp Petrol
- Handbrake cable E-Class E400 (212.061) 333 hp Petrol
- Vacuum pump E-Class E400 (212.061) 333 hp Petrol
- Guide sleeve kit, brake caliper E-Class E400 (212.061) 333 hp Petrol
- Handbrake shoes E-Class E400 (212.061) 333 hp Petrol
- Brake fluid E-Class E400 (212.061) 333 hp Petrol
- Brake pad fitting kit E-Class E400 (212.061) 333 hp Petrol
- Brake servo E-Class E400 (212.061) 333 hp Petrol
- Accessory kit, brake shoes E-Class E400 (212.061) 333 hp Petrol
- Brake pads and discs E-Class E400 (212.061) 333 hp Petrol
- Brake light switch E-Class E400 (212.061) 333 hp Petrol
- Abs ring E-Class E400 (212.061) 333 hp Petrol
- Brake caliper piston E-Class E400 (212.061) 333 hp Petrol
- Brake disc bolts E-Class E400 (212.061) 333 hp Petrol
- High-performance brake pads E-Class E400 (212.061) 333 hp Petrol
- Performance brake discs E-Class E400 (212.061) 333 hp Petrol
- Lateral and longitudinal acceleration sensor E-Class E400 (212.061) 333 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs W212 E 400 3.5 (212.061) 333 hp Petrol
Article №: 82B0636
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Number of Holes: 5/6
- Wheel Bolt Bore Diameter [mm]: 15,4
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Inner Diameter [mm]: 180
- Height [mm]: 67,2
- Surface: Uncoated
- Tightening Torque [Nm]: 130
- Machining: High-carbon
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£ 35,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0888
Details
- Fitting Position: Front Axle
- Diameter [mm]: 344
- Brake Disc Type: Vented
- Number of Holes: 5/6
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 32
- Minimum thickness [mm]: 30,0
- Centering Diameter [mm]: 67
- Inner Diameter [mm]: 154,1
- Height [mm]: 64.6
- Surface: Uncoated
- Machining: Alloyed/High-carbon
- Material: Cast Iron
- Bore Diameter [mm]: 15,0
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: yes
- Condition: New
More
£ 64,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BDC5466
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Height [mm]: 68,2
- Drilled: no
- Condition: New
More
£ 34,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BG3758
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Height [mm]: 68
- Surface: Oiled
- Test Mark: E1 90R-02C0957/2557
- Drilled: no
- Condition: New
More
£ 35,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 22162
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 65,6
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20,5
- Centering Diameter [mm]: 67
- Weight [kg]: 7,4
- Surface: Coated
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Condition: New
More
£ 36,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0636P
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Height [mm]: 68
- Surface: Coated
- Tightening Torque [Nm]: 130
- Machining: High-carbon
- Vehicle configuration line / variant: with bolts/screws
- Material: Grey Cast Iron
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£ 37,68
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 10 92 2162
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 65,6
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20,5
- Centering Diameter [mm]: 67
- Weight [kg]: 7,4
- Surface: Coated
- Number of mounting bores: 1
- Drilled: no
- Condition: New
More
£ 39,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADU174301
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 66
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20,5
- Centering Diameter [mm]: 67
- Weight [kg]: 7,4
- Surface: Coated
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Condition: New
More
£ 41,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 562242CH
Details
-
- Fitting Position: Rear Axle
- paired article number: 571989CH
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Height [mm]: 65,5
- Weight [kg]: 14,46
- Tightening Torque [Nm]: 130
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packing Type: Box
- Packaging length [cm]: 31
- Packaging width [cm]: 31
- Packaging height [cm]: 15
- Drilled: no
- Condition: New
More
£ 42,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8DD 355 108-861
Details
- Product line: PRO
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 05/06
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Inner Diameter [mm]: 180
- Height [mm]: 68,2
- Weight [kg]: 7
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
£ 42,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 562242JC
Details
-
- Fitting Position: Rear Axle
- paired article number: 571989J
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Brake System: ATE
- Height [mm]: 65,5
- Weight [kg]: 14,46
- Surface: Coated
- Tightening Torque [Nm]: 130
- Version: JC
- Test Mark: R90 Homologated
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Packing Type: Box
- Packaging length [cm]: 32
- Packaging width [cm]: 32
- Packaging height [cm]: 15
- Drilled: no
- Condition: New
More
£ 42,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-1262
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 105
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Height [mm]: 68
- Surface: Painted
- Drum diameter [mm]: 180
- Drilled: no
- Condition: New
More
£ 43,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DF4270
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 105
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Height [mm]: 68
- Surface: Painted
- Thread Size: 15,3
- Colour: black
- Test Mark: E1 90R-02 C0226/0199
- Drum diameter [mm]: 180
- Drilled: no
- Condition: New
More
£ 43,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: B130435
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Inner Diameter [mm]: 180,0
- Height [mm]: 68
- Bore Diameter [mm]: 15,3
- Drilled: no
- Condition: New
More
£ 44,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 15814
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Inner Diameter [mm]: 180
- Height [mm]: 68
- Weight [kg]: 7,1
- Bore Diameter [mm]: 15,3
- Drilled: no
- Condition: New
More
£ 46,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 672527
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Rim Hole Number: 5
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Height [mm]: 68,2
- Weight [kg]: 7,35
- Surface: Coated
- Number of mounting bores: 1
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: without ABS sensor ring, without integrated wheel bearing
- Drilled: no
- Condition: New
More
£ 46,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 1363203200
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 22
- Surface: Coated
- Drilled: no
- Condition: New
More
£ 48,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24012202011-PCS-MS
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Inner Diameter [mm]: 180
- Height [mm]: 68
- Required quantity: 2
- Bore Diameter [mm]: 15,3
- Net weight [kg]: 7,1
- Gross Weight [kg]: 7,36
- Drilled: no
- Condition: New
More
£ 49,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 17399
Details
- Product line: COATED
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Hub Diameter [mm]: 168
- Height [mm]: 68,2
- Weight [kg]: 7,1
- Surface: Coated
- Drilled: no
- Condition: New
More
£ 50,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24012202011PR-PCS-MS
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Inner Diameter [mm]: 180
- Height [mm]: 68
- Surface: Coated
- Required quantity: 2
- Bore Diameter [mm]: 15,3
- Drilled: no
- Condition: New
More
£ 53,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 23-0625C
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300,0
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 22,0
- Centering Diameter [mm]: 67,0
- Height [mm]: 68,2
- Surface: Painted
- Test Mark: ECE-R90, ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£ 53,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 128590FCAL
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Height [mm]: 68,3
- Weight [kg]: 7,1
- Surface: Coated
- Condition: New
More
£ 54,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 61-00-0514
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19,4
- Height [mm]: 65,5
- Drilled: no
- Condition: New
More
£ 55,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 203363
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Rim Hole Number: 5
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Height [mm]: 68
- Surface: Oiled
- for article number: 89011661 Bolt
- Net weight [kg]: 6,97
- Drilled: no
- Condition: New
More
£ 56,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCH20523
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Height [mm]: 68
- Surface: Coated
- Tightening Torque [Nm]: 130
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£ 73,98
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 127 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
