Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs W211 E320 (211.065) 224 hp Petrol
- Brake pads W211 E320 (211.065) 224 hp Petrol
- Brake caliper W211 E320 (211.065) 224 hp Petrol
- Drum brake W211 E320 (211.065) 224 hp Petrol
- ABS sensor W211 E320 (211.065) 224 hp Petrol
- Brake caliper repair kit W211 E320 (211.065) 224 hp Petrol
- Handbrake W211 E320 (211.065) 224 hp Petrol
- Brake disc back plate W211 E320 (211.065) 224 hp Petrol
- Brake caliper carrier W211 E320 (211.065) 224 hp Petrol
- Brake pad wear sensor W211 E320 (211.065) 224 hp Petrol
- Brake shoes E-Class E320 (211.065) 224 hp Petrol
- Brake hose E-Class E320 (211.065) 224 hp Petrol
- Master cylinder E-Class E320 (211.065) 224 hp Petrol
- Handbrake cable E-Class E320 (211.065) 224 hp Petrol
- Guide sleeve kit, brake caliper E-Class E320 (211.065) 224 hp Petrol
- Brake fluid E-Class E320 (211.065) 224 hp Petrol
- Handbrake shoes E-Class E320 (211.065) 224 hp Petrol
- Brake pad fitting kit E-Class E320 (211.065) 224 hp Petrol
- Brake servo E-Class E320 (211.065) 224 hp Petrol
- Wheel cylinder E-Class E320 (211.065) 224 hp Petrol
- Accessory kit, brake shoes E-Class E320 (211.065) 224 hp Petrol
- Brake pads and discs E-Class E320 (211.065) 224 hp Petrol
- Brake light switch E-Class E320 (211.065) 224 hp Petrol
- Brake shoe adjuster E-Class E320 (211.065) 224 hp Petrol
- Abs ring E-Class E320 (211.065) 224 hp Petrol
- Brake pipe E-Class E320 (211.065) 224 hp Petrol
- Brake caliper piston E-Class E320 (211.065) 224 hp Petrol
- Brake disc bolts E-Class E320 (211.065) 224 hp Petrol
- Performance brake discs E-Class E320 (211.065) 224 hp Petrol
- High-performance brake pads E-Class E320 (211.065) 224 hp Petrol
- Abs pump E-Class E320 (211.065) 224 hp Petrol
- Lateral and longitudinal acceleration sensor E-Class E320 (211.065) 224 hp Petrol
- Control unit, brake / driving dynamics E-Class E320 (211.065) 224 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs W211 E 320 3.2 (211.065) 224 hp Petrol
Article №: V30-80050
Details
-
- Vehicle Identification Number (VIN) from: A400548, X112805
- Special Purpose Vehicle: for armoured vehicles, for taxis
-
- not for country specific design: Japan, USA, Australia
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Height [mm]: 68
- Weight [kg]: 7,86
- Brake Disc Hub Height [mm]: 46,2
- Packaging width [cm]: 32
- Packaging height [cm]: 15
- Packaging Depth [cm]: 32
- fulfils ECE norm: R90
- Drilled: no
- Condition: New
More
£24,83
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V30-40044
Details
-
- Vehicle Identification Number (VIN) to: A400547, X112804
-
- Special Purpose Vehicle: not for armoured vehicles, not for hired vehicles, not for taxis
- Vehicle configuration line / variant: + solid disc
-
- Country Specific Design: Japan, USA, Australia
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,3
- Centering Diameter [mm]: 67
- Height [mm]: 68,3
- Weight [kg]: 5,85
- Brake Disc Hub Height [mm]: 58,1
- Packaging width [cm]: 32
- Packaging height [cm]: 15
- Packaging Depth [cm]: 32
- Drilled: no
- Condition: New
More
-53%
compared to RRP:
£54,56
£25,29
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 562213CH
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 9,3
- Centering Diameter [mm]: 67
- Height [mm]: 65,5
- Weight [kg]: 10,51
- Tightening Torque [Nm]: 130
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packing Type: Box
- Packaging length [cm]: 30,1
- Packaging width [cm]: 30,1
- Packaging height [cm]: 14
- Drilled: no
- Condition: New
More
-62%
compared to RRP:
£74,47
£28,05
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 562213JC
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 9,3
- Centering Diameter [mm]: 67
- Brake System: ATE
- Height [mm]: 65,5
- Weight [kg]: 10,51
- Surface: Coated
- Tightening Torque [Nm]: 130
- Version: JC
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Packing Type: Box
- Packaging length [cm]: 33
- Packaging width [cm]: 33
- Packaging height [cm]: 16
- Drilled: no
- Condition: New
More
-72%
compared to RRP:
£104,83
£28,51
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V30-80047
Details
- Supplementary Info: Original VAICO Quality
- Fitting Position: Front Axle
- Diameter [mm]: 295
- Brake Disc Type: Vented
- Number of Holes: 5
- Rim Hole Number: 5
- Bore Diameter 2 [mm]: 9,2
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 25,4
- Centering Diameter [mm]: 67
- Height [mm]: 54,5
- Weight [kg]: 8,177
- Vehicle Identification Number (VIN) from: A 400548, X 112805, X112805
- Brake Disc Hub Height [mm]: 26,5
- Packaging width [cm]: 30
- Packaging height [cm]: 11
- Packaging Depth [cm]: 30
- Drilled: no
- Condition: New
More
£29,89
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0228P
Details
-
- Fitting Position: Rear Axle
- Vehicle configuration line / variant: + solid disc
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: solid
- Number of Holes: 5/6
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 67,1
- Height [mm]: 68,3
- Surface: Coated
- Material: Grey Cast Iron
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
-58%
compared to RRP:
£75,03
£30,87
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBD-0022197
Details
-
- Vehicle Identification Number (VIN) to: A400547, 112804
-
- not for country specific design: USA, Japan, Australia
- Fitting Position: Front Axle
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Number of Holes: 5/6
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 28
- Centering Diameter [mm]: 67
- Height [mm]: 64,5
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-52%
compared to RRP:
£70,10
£33,11
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: M2019PR
Details
-
- Fitting Position: Rear Axle
- Special Purpose Vehicle: not for taxis
- Diameter [mm]: 300
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 67
- Height [mm]: 68,5
- Surface: Coated
- Condition: New
More
£34,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0636P
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Number of Holes: 5/6
- Wheel Bolt Bore Diameter [mm]: 15,4
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 67
- Height [mm]: 67,2
- Surface: Coated
- Machining: High-carbon
- Material: Grey Cast Iron
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
-55%
compared to RRP:
£78,71
£35,15
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 23-0624C
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300,0
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10,0
- Minimum thickness [mm]: 8,3
- Centering Diameter [mm]: 67,0
- Height [mm]: 65,3
- Surface: Painted
- Test Mark: ECE-R90
- Drilled: no
- Condition: New
More
£36,79
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 1363202900
Details
-
- Special Purpose Vehicle: not for armoured vehicles, not for hired vehicles, not for taxis
-
- Vehicle Identification Number (VIN) to: A400547, X112804
-
- Country Specific Design: Japan, USA, Australia
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10
- Surface: Coated
- Drilled: no
- Condition: New
More
-30%
compared to RRP:
£53,91
£37,25
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 231-03-188
Details
-
- Fitting Position: Front Axle
- Vehicle Identification Number (VIN) from: A 400548
- Diameter [mm]: 295
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 28
- Centering Diameter [mm]: 67
- Height [mm]: 54,5
- Required quantity: 2
- Test Mark: ECE R90
- Replace in pairs only
- Article number of recommended accessories: 131-07-151, 131-07-152
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£37,71
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24012801761-PCS-MS
Details
- Fitting Position: Front Axle
- Diameter [mm]: 295
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 25,4
- Centering Diameter [mm]: 67
- Inner Diameter [mm]: 154
- Height [mm]: 54,5
- Machining: Alloyed/High-carbon
- Vehicle Identification Number (VIN) from: A 400548
- Required quantity: 2
- Bore Diameter [mm]: 15,3
- Net weight [kg]: 8,06
- Gross Weight [kg]: 8,25
- Drilled: no
- Condition: New
More
-43%
compared to RRP:
£67,94
£38,63
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 15813
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,3
- Centering Diameter [mm]: 67
- Inner Diameter [mm]: 180
- Height [mm]: 65,5
- Weight [kg]: 5,1
- Drilled: no
- Condition: New
More
-40%
compared to RRP:
£66,98
£40,01
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24012202011-PCS-MS
Details
-
- Vehicle Identification Number (VIN) from: A 400548
- Special Purpose Vehicle: not for taxis, for taxis
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19,4
- Centering Diameter [mm]: 67
- Inner Diameter [mm]: 180
- Height [mm]: 68
- Required quantity: 2
- Bore Diameter [mm]: 15,3
- Net weight [kg]: 7,10
- Gross Weight [kg]: 7,36
- Drilled: no
- Condition: New
More
-40%
compared to RRP:
£70,06
£41,39
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BDC5415
Details
-
- Fitting Position: Rear Axle
- Brake System: Ate
- Diameter [mm]: 300
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,3
- Centering Diameter [mm]: 67
- Height [mm]: 68,5
- Drilled: no
- Condition: New
More
-61%
compared to RRP:
£108,77
£41,39
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBD-0022344
Details
- Fitting Position: Front Axle
- Diameter [mm]: 330
- Brake Disc Type: Vented
- Number of Holes: 5/6
- Wheel Bolt Bore Diameter [mm]: 15
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 32
- Centering Diameter [mm]: 67
- Height [mm]: 64,5
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: yes
- Condition: New
More
-59%
compared to RRP:
£104,60
£41,85
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24012801411-PCS-MS
Details
- Fitting Position: Front Axle
- Diameter [mm]: 295
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 25,4
- Centering Diameter [mm]: 67
- Inner Diameter [mm]: 154
- Height [mm]: 54,5
- Machining: Alloyed/High-carbon
- Vehicle Identification Number (VIN) from: A 400548, A400548
- Required quantity: 2
- Bore Diameter [mm]: 15,3
- Net weight [kg]: 8,10
- Gross Weight [kg]: 8,18
- Drilled: no
- Condition: New
More
-30%
compared to RRP:
£60,53
£42,31
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBD-0022870
Details
- Fitting Position: Front Axle
- Diameter [mm]: 330
- Brake Disc Type: Vented
- Number of Holes: 5/6
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 32
- Centering Diameter [mm]: 67
- Height [mm]: 64,4
- Surface: Uncoated
- Machining: Untreated
- Special Purpose Vehicle: for armoured vehicles
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-57%
compared to RRP:
£101,60
£42,77
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 1363203200
Details
-
- Special Purpose Vehicle: for armoured vehicles, for rental vehicles, for taxis
-
- Vehicle Identification Number (VIN) from: A400548, X112805
-
- not for country specific design: Japan, USA, Australia
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 22
- Surface: Coated
- Drilled: no
- Condition: New
More
-35%
compared to RRP:
£66,24
£42,77
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: B130268
Details
-
- Fitting Position: Front Axle
- Vehicle Identification Number (VIN) from: A 400548
- Diameter [mm]: 296
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 25,4
- Centering Diameter [mm]: 67
- Inner Diameter [mm]: 154,0
- Height [mm]: 54,5
- Bore Diameter [mm]: 15,3
- Drilled: no
- Condition: New
More
£45,53
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-1261
Details
-
- Fitting Position: Front Axle
- Construction Year to: 09/2003
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 25,4
- Centering Diameter [mm]: 67
- Height [mm]: 64,5
- Surface: Painted
- Drilled: no
- Condition: New
More
£49,21
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 61-00-0514
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19,4
- Height [mm]: 65,5
- Drilled: no
- Condition: New
More
£52,43
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCH20523
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Number of Holes: 5/6
- Wheel Bolt Bore Diameter [mm]: 15,4
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 67
- Height [mm]: 67,2
- Surface: Coated
- Machining: High-carbon
- Material: Grey Cast Iron
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£75,14
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCH20112
Details
-
- Fitting Position: Front Axle
- Vehicle Identification Number (VIN) from: A400548
- Fitting Position: Front Axle
- Diameter [mm]: 295,1
- Brake Disc Type: Vented
- Number of Holes: 5/6
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 28
- Centering Diameter [mm]: 67
- Height [mm]: 54,6
- Surface: Coated
- Machining: High-carbon
- Material: Grey Cast Iron
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£81,05
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 300 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- ...
- 11
- 12
