Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs MERCEDES-BENZ CLA Shooting Brake (X118) AMG CLA35 4-matic (118.651) 306 hp Petrol
- Brake pads MERCEDES-BENZ CLA Shooting Brake (X118) AMG CLA35 4-matic (118.651) 306 hp Petrol
- ABS sensor MERCEDES-BENZ CLA Shooting Brake (X118) AMG CLA35 4-matic (118.651) 306 hp Petrol
- Brake caliper repair kit MERCEDES-BENZ CLA Shooting Brake (X118) AMG CLA35 4-matic (118.651) 306 hp Petrol
- Brake pad wear sensor MERCEDES-BENZ CLA Shooting Brake (X118) AMG CLA35 4-matic (118.651) 306 hp Petrol
- Brake caliper carrier MERCEDES-BENZ CLA Shooting Brake (X118) AMG CLA35 4-matic (118.651) 306 hp Petrol
- Brake hose MERCEDES-BENZ CLA Shooting Brake (X118) AMG CLA35 4-matic (118.651) 306 hp Petrol
- Vacuum pump MERCEDES-BENZ CLA Shooting Brake (X118) AMG CLA35 4-matic (118.651) 306 hp Petrol
- Guide sleeve kit, brake caliper MERCEDES-BENZ CLA Shooting Brake (X118) AMG CLA35 4-matic (118.651) 306 hp Petrol
- Brake fluid MERCEDES-BENZ CLA Shooting Brake (X118) AMG CLA35 4-matic (118.651) 306 hp Petrol
- Brake pad fitting kit CLA AMG CLA35 4-matic (118.651) 306 hp Petrol
- Brake servo CLA AMG CLA35 4-matic (118.651) 306 hp Petrol
- Brake disc bolts CLA AMG CLA35 4-matic (118.651) 306 hp Petrol
- Clutch
- Damping
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs MERCEDES-BENZ CLA Shooting Brake (X118) AMG CLA 35 4-matic (118.651) 306 hp Petrol
Article №: 400.5545.20
Details
-
- Fitting Position: Rear Axle
- Country Specific Design: USA
- Diameter [mm]: 320
- Brake Disc Type: solid
- Rim Hole Number: 5
- Hole Arrangement/Number: 6/5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10,3
- Centering Diameter [mm]: 67
- Height [mm]: 44
- Weight [kg]: 5,9
- Surface: Coated
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£41,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 986 479 F10
Details
-
- Fitting Position: Front Axle
- Braking System: for vehicles with reinforced brakes
- Vehicle configuration line / variant: Sport
- Diameter [mm]: 350
- Brake Disc Type: Vented, Perforated
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 28
- Centering Diameter [mm]: 67
- Height [mm]: 51
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15,3
- Condition: New
More
£41,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 986 479 F13
Details
-
- Fitting Position: Rear Axle
- Braking System: for vehicles with reinforced brakes
- Vehicle configuration line / variant: Sport
- Diameter [mm]: 320
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10,3
- Centering Diameter [mm]: 67
- Height [mm]: 44
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15
- Condition: New
More
£41,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 107513
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 320
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 43
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10,3
- Centering Diameter [mm]: 67
- Surface: Coated
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Condition: New
More
£42,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADU1743116
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 320
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 43
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10,3
- Centering Diameter [mm]: 67
- Surface: Coated
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Condition: New
More
£43,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BG5048C
Details
-
- Fitting Position: Rear Axle
- Vehicle Equipment: for vehicles with sports package
- Diameter [mm]: 320
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10,3
- Centering Diameter [mm]: 67
- Height [mm]: 44
- Surface: Coated
- Machining: High-carbon
- Test Mark: E1 90R-02C0250/1763
- Condition: New
More
£44,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24.0112-0226.1
Details
-
- Fitting Position: Rear Axle
- for special equipment code: U29
- Diameter [mm]: 320,0
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Brake Disc Thickness [mm]: 12,0
- Minimum thickness [mm]: 10,3
- Centering Diameter [mm]: 67,0
- Inner Diameter [mm]: 157,5
- Height [mm]: 44,0
- Surface: Coated
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C2420/2509
- Bore Diameter [mm]: 15,2
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Condition: New
More
£46,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 02.35.624
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 320
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 12
- for OE number: 247 423 0312
- Drilled: no
- Condition: New
More
£50,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 107515
Details
- Fitting Position: Front Axle
- Diameter [mm]: 330
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 51
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 27,4
- Centering Diameter [mm]: 67
- Surface: Coated
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Condition: New
More
£57,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-4866
Details
- Fitting Position: Front Axle
- Diameter [mm]: 350
- Brake Disc Type: perforated/vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 28
- Centering Diameter [mm]: 67
- Height [mm]: 51
- Surface: Coated
- Machining: High-carbon
- Condition: New
More
£59,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DF6896S
Details
- Fitting Position: Front Axle
- Diameter [mm]: 330
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 28,4
- Centering Diameter [mm]: 67
- Height [mm]: 51,1
- Surface: Painted
- Machining: High-carbon
- Thread Size: 15,2
- Colour: black
- Test Mark: E1 90R-02 C0176/0749
- Condition: New
More
£61,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADU1743118
Details
- Fitting Position: Front Axle
- Diameter [mm]: 330
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 51
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 27,4
- Centering Diameter [mm]: 67
- Surface: Coated
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Condition: New
More
£65,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24.0130-0256.1
Details
-
- Fitting Position: Front Axle
- for special equipment code: U29
- Diameter [mm]: 350,0
- Brake Disc Type: perforated/vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Brake Disc Thickness [mm]: 30,0
- Minimum thickness [mm]: 28,0
- Centering Diameter [mm]: 67,0
- Inner Diameter [mm]: 155,0
- Height [mm]: 51
- Surface: Coated
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0640/1223
- Bore Diameter [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Condition: New
More
£69,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADU1743113
Details
- Fitting Position: Front Axle
- Diameter [mm]: 350
- Brake Disc Type: perforated/vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 51
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 28
- Centering Diameter [mm]: 67
- Surface: Coated
- Number of mounting bores: 1
- Braking System: for vehicles with sports brake system
- Observe service information
- Drilled: yes
- Condition: New
More
£71,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 107510
Details
- Fitting Position: Front Axle
- Diameter [mm]: 350
- Brake Disc Type: perforated/vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 51
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 28
- Centering Diameter [mm]: 67
- Surface: Coated
- Number of mounting bores: 1
- Braking System: for vehicles with sports brake system
- Observe service information
- Drilled: yes
- Condition: New
More
£73,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DF6946S
Details
-
- Fitting Position: Front Axle
- Braking System: for vehicles with sports brake system, for vehicles with reinforced brakes
- Vehicle Equipment: for vehicles with AMG Sports Package
- Diameter [mm]: 350
- Brake Disc Type: perforated/vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 28
- Centering Diameter [mm]: 67
- Height [mm]: 51
- Surface: Painted
- Machining: High-carbon
- Thread Size: 15,2
- Colour: black
- Test Mark: E1 90R-02 C0838/2508
- Condition: New
More
£82,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 400.5550.53
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 330
- Brake Disc Type: internally vented, slotted
- Rim Hole Number: 5
- Hole Arrangement/Number: 6/5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20,0
- Centering Diameter [mm]: 67
- Height [mm]: 32
- Weight [kg]: 7,4
- Surface: Coated
- Test Mark: ECE R90 APPROVED
- directional
- Drilled: no
- Condition: New
More
£84,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 400.5550.20
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 330
- Brake Disc Type: internally vented, Perforated
- Rim Hole Number: 5
- Hole Arrangement/Number: 6/5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20,0
- Centering Diameter [mm]: 67
- Height [mm]: 32
- Weight [kg]: 7,4
- Surface: Coated
- Test Mark: ECE R90 APPROVED
- Drilled: yes
- Condition: New
More
£85,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 400.5541.20
Details
-
- Fitting Position: Front Axle
- Braking System: for vehicles with sports brake system
- Diameter [mm]: 350
- Brake Disc Type: internally vented, Perforated
- Rim Hole Number: 5
- Hole Arrangement/Number: 6/5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 28
- Centering Diameter [mm]: 67
- Height [mm]: 51
- Weight [kg]: 10,8
- Surface: Coated
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: yes
- Condition: New
More
£88,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 33 10 7309
Details
- Fitting Position: Front Axle
- Diameter [mm]: 350
- Brake Disc Type: perforated/vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 50,9
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 28
- Centering Diameter [mm]: 67
- Weight [kg]: 10,75
- Surface: Coated
- Number of mounting bores: 1
- Braking System: for vehicles with sports brake system
- Drilled: yes
- Condition: New
More
£94,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DF6865S
Details
- Fitting Position: Front Axle
- Diameter [mm]: 350
- Brake Disc Type: perforated/vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 32
- Minimum thickness [mm]: 30
- Centering Diameter [mm]: 67
- Height [mm]: 52,2
- Surface: Painted
- Thread Size: 15,2
- Colour: black
- Test Mark: E1 90R-02 C0838/2508
- Condition: New
More
£107,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 400.5541.55
Details
-
- Fitting Position: Front Axle Right
- Braking System: for vehicles with sports brake system
- Diameter [mm]: 350
- Brake Disc Type: internally vented, slotted
- Rim Hole Number: 5
- Hole Arrangement/Number: 6/5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 28
- Centering Diameter [mm]: 67
- Height [mm]: 51
- Weight [kg]: 10,8
- Surface: Coated
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Paired product: 400.5541.54
- directional
- Condition: New
More
£109,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 400.5549.20
Details
-
- Fitting Position: Front Axle
- Braking System: for vehicles with a standard brake system
- Diameter [mm]: 350
- Brake Disc Type: internally vented, Perforated
- Rim Hole Number: 5
- Hole Arrangement/Number: 6/5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 32
- Minimum thickness [mm]: 30
- Centering Diameter [mm]: 67
- Height [mm]: 52
- Weight [kg]: 13,7
- Surface: Coated
- Test Mark: ECE R90 APPROVED
- Drilled: yes
- Condition: New
More
£112,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 400.5541.54
Details
-
- Fitting Position: Front Axle Left
- Braking System: for vehicles with sports brake system
- Diameter [mm]: 350
- Brake Disc Type: internally vented, slotted
- Rim Hole Number: 5
- Hole Arrangement/Number: 6/5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 28
- Centering Diameter [mm]: 67
- Height [mm]: 51
- Weight [kg]: 10,8
- Surface: Coated
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Paired product: 400.5541.55
- directional
- Condition: New
More
£123,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 400.5549.55
Details
- Fitting Position: Front Axle Right
- Diameter [mm]: 350
- Brake Disc Type: internally vented, slotted
- Rim Hole Number: 5
- Hole Arrangement/Number: 6/5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 32
- Minimum thickness [mm]: 30
- Centering Diameter [mm]: 67
- Height [mm]: 52
- Weight [kg]: 13,7
- Surface: Coated
- Test Mark: ECE R90 APPROVED
- Paired product: 400.5549.54
- directional
- Condition: New
More
Showing 25 out of 33 products
