Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs Mercedes W169 A200 TURBO (169.034, 169.334) 193 hp Petrol
- Brake pads Mercedes W169 A200 TURBO (169.034, 169.334) 193 hp Petrol
- Brake caliper Mercedes W169 A200 TURBO (169.034, 169.334) 193 hp Petrol
- Drum brake Mercedes W169 A200 TURBO (169.034, 169.334) 193 hp Petrol
- ABS sensor Mercedes W169 A200 TURBO (169.034, 169.334) 193 hp Petrol
- Brake caliper repair kit Mercedes W169 A200 TURBO (169.034, 169.334) 193 hp Petrol
- Handbrake Mercedes W169 A200 TURBO (169.034, 169.334) 193 hp Petrol
- Brake disc back plate Mercedes W169 A200 TURBO (169.034, 169.334) 193 hp Petrol
- Brake caliper carrier Mercedes W169 A200 TURBO (169.034, 169.334) 193 hp Petrol
- Brake pad wear sensor Mercedes W169 A200 TURBO (169.034, 169.334) 193 hp Petrol
- Brake shoes A-Class A200 TURBO (169.034, 169.334) 193 hp Petrol
- Brake hose A-Class A200 TURBO (169.034, 169.334) 193 hp Petrol
- Master cylinder A-Class A200 TURBO (169.034, 169.334) 193 hp Petrol
- Handbrake cable A-Class A200 TURBO (169.034, 169.334) 193 hp Petrol
- Guide sleeve kit, brake caliper A-Class A200 TURBO (169.034, 169.334) 193 hp Petrol
- Brake fluid A-Class A200 TURBO (169.034, 169.334) 193 hp Petrol
- Handbrake shoes A-Class A200 TURBO (169.034, 169.334) 193 hp Petrol
- Brake pad fitting kit A-Class A200 TURBO (169.034, 169.334) 193 hp Petrol
- Brake servo A-Class A200 TURBO (169.034, 169.334) 193 hp Petrol
- Accessory kit, brake shoes A-Class A200 TURBO (169.034, 169.334) 193 hp Petrol
- Brake pads and discs A-Class A200 TURBO (169.034, 169.334) 193 hp Petrol
- Brake light switch A-Class A200 TURBO (169.034, 169.334) 193 hp Petrol
- Brake pipe A-Class A200 TURBO (169.034, 169.334) 193 hp Petrol
- Brake caliper piston A-Class A200 TURBO (169.034, 169.334) 193 hp Petrol
- Brake disc bolts A-Class A200 TURBO (169.034, 169.334) 193 hp Petrol
- Abs pump A-Class A200 TURBO (169.034, 169.334) 193 hp Petrol
- Lateral and longitudinal acceleration sensor A-Class A200 TURBO (169.034, 169.334) 193 hp Petrol
- Control unit, brake / driving dynamics A-Class A200 TURBO (169.034, 169.334) 193 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs Mercedes W169 A 200 2.0 Turbo (169.034, 169.334) 193 hp Petrol
Article №: 82B0142
Details
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Number of Holes: 5/6
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 67
- Height [mm]: 44,4
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-69%
compared to RRP:
£52,50
£16,09
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0071
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5/6
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 8
- Centering Diameter [mm]: 67
- Height [mm]: 55,4
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-47%
compared to RRP:
£34,10
£17,93
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBD-0020146
Details
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Number of Holes: 5/6
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 67
- Height [mm]: 44,4
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-70%
compared to RRP:
£52,50
£15,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBD-0020073
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5/6
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 8
- Centering Diameter [mm]: 67
- Height [mm]: 55,4
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-47%
compared to RRP:
£34,09
£17,93
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24750
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 55
- Brake Disc Thickness [mm]: 8
- Minimum thickness [mm]: 7
- Centering Diameter [mm]: 67
- Surface: Coated
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Condition: New
More
-58%
compared to RRP:
£43,98
£18,39
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 562274CH
Details
-
- Fitting Position: Rear Axle
- Paired product: 573082CH
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 8
- Minimum thickness [mm]: 7
- Centering Diameter [mm]: 67
- Height [mm]: 55,5
- Weight [kg]: 6,84
- Tightening Torque [Nm]: 130
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packing Type: Box
- Packaging length [cm]: 25,9
- Packaging width [cm]: 25,9
- Packaging height [cm]: 11,8
- Drilled: no
- Condition: New
More
-71%
compared to RRP:
£63,67
£18,39
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 17645
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 8
- Minimum thickness [mm]: 7
- Centering Diameter [mm]: 67
- Hub Diameter [mm]: 166
- Height [mm]: 57,2
- Weight [kg]: 3,24
- Surface: Coated
- Drilled: no
- Condition: New
More
-62%
compared to RRP:
£51,62
£19,31
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 562274JC
Details
-
- Fitting Position: Rear Axle
- Paired product: 573082J
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 8
- Minimum thickness [mm]: 7
- Centering Diameter [mm]: 67
- Height [mm]: 55,5
- Weight [kg]: 6,84
- Surface: Coated
- Tightening Torque [Nm]: 130
- Version: JC
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Packing Type: Box
- Packaging width [cm]: 28
- Packaging height [cm]: 14
- Drilled: no
- Condition: New
More
£19,31
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 401 386
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 8
- Centering Diameter [mm]: 67
- Hub Diameter [mm]: 166
- Height [mm]: 57,3
- Surface: Coated
- Replace in pairs only
- Drilled: no
- Condition: New
More
-44%
compared to RRP:
£38,84
£21,61
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0071P
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5/6
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 8
- Centering Diameter [mm]: 67
- Height [mm]: 55,4
- Surface: Coated
- Material: Grey Cast Iron
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Drilled: no
- Condition: New
More
-57%
compared to RRP:
£50,39
£21,63
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 231-04-022
Details
-
- Fitting Position: Rear Axle
- Construction Year to: 05/2012
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 8
- Centering Diameter [mm]: 67
- Height [mm]: 57,3
- Required quantity: 2
- Test Mark: ECE R90
- Replace in pairs only
- Article number of recommended accessories: 131-07-611, 131-07-612
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£22,07
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6051120
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258, 258,0
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 8,0
- Height [mm]: 55
- Production Number: 6051120
- Drilled: no
- Condition: New
More
£22,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 1363203100
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 8
- Surface: Coated
- Drilled: no
- Condition: New
More
-28%
compared to RRP:
£32,64
£23,45
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24010801131PR-PCS-MS
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5
- Construction Year to: 05/2012
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 8
- Minimum thickness [mm]: 7
- Centering Diameter [mm]: 67
- Inner Diameter [mm]: 164
- Height [mm]: 57,3
- Surface: Coated
- Required quantity: 2
- Bore Diameter [mm]: 15
- Drilled: no
- Condition: New
More
-24%
compared to RRP:
£32,94
£24,83
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: M2003PR
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 8
- Centering Diameter [mm]: 67
- Height [mm]: 55,5
- Surface: Coated
- Drilled: no
- Condition: New
More
£25,29
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-1225
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 8
- Minimum thickness [mm]: 7,3
- Centering Diameter [mm]: 67
- Height [mm]: 57,3
- Surface: Painted
- Test Mark: E1 90R 02 C0204/0283
- Drum diameter [mm]: 164
- Drilled: no
- Condition: New
More
£25,75
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 02.35.140
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 8
- for OE number: 169 423 0312
- Drilled: no
- Condition: New
More
-10%
compared to RRP:
£29,17
£26,21
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: B130410
Details
-
- Fitting Position: Rear Axle
- Construction Year to: 05/2012
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 8
- Minimum thickness [mm]: 7,0
- Centering Diameter [mm]: 67
- Inner Diameter [mm]: 164,0
- Height [mm]: 57,3
- Bore Diameter [mm]: 15,0
- Drilled: no
- Condition: New
More
£27,13
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 1032516
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 8
- Centering Diameter [mm]: 67
- Height [mm]: 57
- Surface: Coated
- Drilled: no
- Condition: New
More
£27,13
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: M2003P
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 8
- Minimum thickness [mm]: 7
- Centering Diameter [mm]: 67
- Height [mm]: 55,5
- Drilled: no
- Condition: New
More
£27,59
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 25802
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 8
- Drilled: no
- Condition: New
More
-54%
compared to RRP:
£62,24
£28,05
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-1225MAX
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 8
- Minimum thickness [mm]: 7,3
- Centering Diameter [mm]: 67
- Height [mm]: 57,3
- Weight [kg]: 3,3
- Surface: Painted
- Test Mark: E1 90R 02 C0204/0283
- Drum diameter [mm]: 164
- Drilled: no
- Condition: New
More
£29,43
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-1796
Details
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 67
- Height [mm]: 44,5
- Weight [kg]: 6,24
- Surface: Painted
- Colour: black
- Test Mark: E1 90R 02 C0176/0493
- Drilled: no
- Condition: New
More
£34,95
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: LVBD1130
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5
- Number of bores: 1
- Wheel Bolt Bore Diameter [mm]: 15
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 8
- Minimum thickness [mm]: 7
- Centering Diameter [mm]: 67
- Height [mm]: 57,2
- Weight [kg]: 3,45
- Surface: Coated
- Condition: New
More
£40,01
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCH20072
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5/6
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 8
- Centering Diameter [mm]: 67
- Height [mm]: 55,4
- Surface: Coated
- Material: Grey Cast Iron
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Drilled: no
- Condition: New
More
£45,16
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 248 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
