Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
-
Exhaust
- Lambda sensor Mercedes W168 A190 (168.032, 168.132) 125 hp Petrol
- Turbo Mercedes W168 A190 (168.032, 168.132) 125 hp Petrol
- Catalytic converter Mercedes W168 A190 (168.032, 168.132) 125 hp Petrol
- Intercooler pipe Mercedes W168 A190 (168.032, 168.132) 125 hp Petrol
- Exhaust silencer Mercedes W168 A190 (168.032, 168.132) 125 hp Petrol
- Mounting kit, exhaust system Mercedes W168 A190 (168.032, 168.132) 125 hp Petrol
- Exhaust pipe Mercedes W168 A190 (168.032, 168.132) 125 hp Petrol
- Boost pressure sensor Mercedes W168 A190 (168.032, 168.132) 125 hp Petrol
- Exhaust hanger Mercedes W168 A190 (168.032, 168.132) 125 hp Petrol
- Exhaust manifold gasket Mercedes W168 A190 (168.032, 168.132) 125 hp Petrol
- Exhaust manifold A-Class A190 (168.032, 168.132) 125 hp Petrol
- Exhaust gasket A-Class A190 (168.032, 168.132) 125 hp Petrol
- Clamp, exhaust system A-Class A190 (168.032, 168.132) 125 hp Petrol
- Catalytic converter mounting kit A-Class A190 (168.032, 168.132) 125 hp Petrol
- Heat shield A-Class A190 (168.032, 168.132) 125 hp Petrol
- Silencer rubber A-Class A190 (168.032, 168.132) 125 hp Petrol
- Silencer mounting kit A-Class A190 (168.032, 168.132) 125 hp Petrol
- Clamp, silencer A-Class A190 (168.032, 168.132) 125 hp Petrol
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Lambda sensor Mercedes W168 A 190 1.9 (168.032, 168.132) 125 hp Petrol

Article №: 3922L0167
Details
-
- Construction Year from: 03/2001
- Oxygen Sensor: Diagnostic Probe
- Exhaust System: after catalytic converter
- Vehicle Identification Number (VIN) to: J 568589
-
- Oxygen Sensor: Diagnostic Probe, Regulating Probe
- Exhaust System: after catalytic converter, before catalytic converter
- Vehicle Identification Number (VIN) to: J 568589
- Construction Year from: 03/2001
-
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Vehicle Identification Number (VIN) to: J 568589
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 480
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£17,61
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 3922L0923
Details
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 290
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£30,99
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 3922L0229
Details
-
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Vehicle Identification Number (VIN) from: J 568590
- Vehicle type: <168.132>
-
- Construction Year from: 09/2000
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- not for emission standard: D3
- Vehicle Identification Number (VIN) from: J 568590
-
- Construction Year from: 09/2000
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Emission Standard: D3
- Supplementary Info: Universal
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 480
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with squeeze connector, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£35,99
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 3922L0014
Details
-
- Vehicle type: <168.032>, <168.132>
- Oxygen Sensor: Diagnostic Probe
- Exhaust System: after catalytic converter
- Vehicle Identification Number (VIN) to: J 568589
- Construction Year from: 03/2001
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 260
- Number of pins: 4
- Number of circuits: 4
- Connector Shape: round
- Plug housing design: Plug sleeve housing
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£42,29
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 3922L0087
Details
- Oxygen Sensor: Regulating Probe, Heated
- Thread Size: M18x1,5
- Number of pins: 4
- Length [mm]: 220
- Conductor Number: 4
- Connector Shape: round
- Plug housing design: Plug sleeve housing
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£45,99
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 3922L0083
Details
-
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 390
- Number of pins: 4
- Number of circuits: 4
- Connector Shape: round
- Line insulation design: with silicone-coated woven-fibre insulation
- Plug housing design: Plug sleeve housing
- Condition: New
More
£70,49
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: SKLS-0140080
Details
-
- Construction Year from: 03/2001
- Oxygen Sensor: Diagnostic Probe
- Exhaust System: after catalytic converter
- Vehicle Identification Number (VIN) to: J 568589
-
- Oxygen Sensor: Diagnostic Probe, Regulating Probe
- Exhaust System: after catalytic converter, before catalytic converter
- Vehicle Identification Number (VIN) to: J 568589
- Construction Year from: 03/2001
-
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Vehicle Identification Number (VIN) to: J 568589
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 480
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£17,22
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 01759
Details
- Oxygen Sensor: Regulating Probe
- Number of pins: 4
- Length [mm]: 580
- Condition: New
More
£28,49
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 9 7017 1
Details
- Oxygen Sensor: Planar probe
- Number of pins: 4
- Weight [kg]: 0,196
- for OE number: 001 540 37 17
- Voltage [V]: 12
- Condition: New
More
£33,49
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 3922L0167P
Details
-
- Construction Year from: 03/2001
- Oxygen Sensor: Diagnostic Probe
- Exhaust System: after catalytic converter
- Vehicle Identification Number (VIN) to: J 568589
-
- Oxygen Sensor: Diagnostic Probe, Regulating Probe
- Exhaust System: after catalytic converter, before catalytic converter
- Vehicle Identification Number (VIN) to: J 568589
- Construction Year from: 03/2001
-
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Vehicle Identification Number (VIN) to: J 568589
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 530
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£33,72
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: ESL-CH-012
Details
- Oxygen Sensor: Thread pre-greased
- Overall Length [mm]: 260
- Number of circuits: 4
- Fabrication Number: ESL-CH-012
- Condition: New
More
£34,49
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: SKLS-0140232
Details
-
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Vehicle Identification Number (VIN) from: J 568590
- Vehicle type: <168.132>
-
- Construction Year from: 09/2000
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- not for emission standard: D3
- Vehicle Identification Number (VIN) from: J 568590
-
- Construction Year from: 09/2000
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Emission Standard: D3
- Supplementary Info: Universal
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 480
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with squeeze connector, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£35,99
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: GOS-4000E
Details
- Oxygen Sensor: Oxygen Sensor
- Number of circuits: 4
- Weight [kg]: 0,09
- Voltage [V]: 12
- Resistor [Ohm]: 9
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.)
- Condition: New
More
£35,99
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: LBS00271
Details
-
- Fitting Position: before catalytic converter
- Construction Year from: 04/2001
- Vehicle Identification Number (VIN) from: J568590
- Oxygen Sensor: Oxygen Sensor
- Thread Size: M18X1.5mm
- Cable Length [mm]: 315
- Overall Length [mm]: 460
- Length [mm]: 432
- Number of circuits: 4
- Conductor Number: 4
- Recommended change interval [km]: 80000
- Weight [kg]: 0,13
- Quality: OE EQUIVALENT
- Number of connectors: 1
- Supplementary Article / Supplementary Info Info 2: without clip
- Version: A
- Housing Colour: black
- Connector Shape: round
- Material: Metal
- Packaging length [cm]: 16
- Packaging width [cm]: 6,3
- Packaging height [cm]: 5,6
- Net weight [kg]: 0,1
- Number of pins: 4
- Line insulation design: with silicone insulation
- Condition: New
More
£37,99
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 3922L0229P
Details
-
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Vehicle Identification Number (VIN) from: J 568590
- Vehicle type: <168.132>
-
- Construction Year from: 09/2000
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- not for emission standard: D3
- Vehicle Identification Number (VIN) from: J 568590
-
- Construction Year from: 09/2000
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Emission Standard: D3
- Supplementary Info: Universal
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 530
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with squeeze connector, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£38,23
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: OS-15P
Details
-
- Fitting Position: after catalytic converter
- TecDoc Engine Number: M 166.990
- Oxygen Sensor: Oxygen Sensor
- Cable Length [mm]: 200
- Number of pins: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Specification: Isolated Ground, Planar Type, Zirconia Type
- Length [inch]: 7,87
- Condition: New
More
£39,49
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 3922L0087P
Details
- Oxygen Sensor: Regulating Probe, Heated
- Thread Size: M18x1,5
- Number of pins: 4
- Length [mm]: 175
- Conductor Number: 4
- Connector Shape: round
- Plug housing design: Plug sleeve housing
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£42,74
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: SKLS-0140123
Details
- Oxygen Sensor: Regulating Probe, Heated
- Thread Size: M18x1,5
- Number of pins: 4
- Length [mm]: 220
- Conductor Number: 4
- Connector Shape: round
- Plug housing design: Plug sleeve housing
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£45,99
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 570112A
Details
- Oxygen Sensor: Oxygen Sensor
- Cable Length [mm]: 290
- Number of circuits: 4
- Alternative Repair Kit: 570112
- Alternatively
- Condition: New
More
£46,93
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: SKLS-0140013
Details
-
- Vehicle type: <168.032>, <168.132>
- Oxygen Sensor: Diagnostic Probe
- Exhaust System: after catalytic converter
- Vehicle Identification Number (VIN) to: J 568589
- Construction Year from: 03/2001
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 275
- Number of pins: 4
- Number of circuits: 4
- Connector Shape: round
- Plug housing design: Plug sleeve housing
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£46,99
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 3922L0083P
Details
-
- Oxygen Sensor: Regulating Probe, Diagnostic Probe
- Exhaust System: for pre-catalytic converter, after catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 380
- Number of pins: 4
- Number of circuits: 4
- Connector Shape: round
- Line insulation design: with silicone-coated woven-fibre insulation
- Plug housing design: Plug sleeve housing
- Condition: New
More
£47,49
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 59-0101
Details
-
- Construction Year from: 03/2001
- Vehicle Identification Number (VIN) to: J568589
- Vehicle type: <168.032>
- Oxygen Sensor: Heated
- Overall Length [mm]: 260
- Number of circuits: 4
- Recommended change interval [km]: 160000
- Condition: New
More
£49,49
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 3922L0014P
Details
-
- Oxygen Sensor: Diagnostic Probe
- Exhaust System: after catalytic converter
- Vehicle Identification Number (VIN) to: J 568589
- Construction Year from: 03/2001
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 275
- Number of pins: 4
- Number of circuits: 4
- Connector Shape: round
- Plug housing design: Plug sleeve housing
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£54,11
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: GCC9220130
Details
-
- Construction Year from: 03/2001
- Oxygen Sensor: Diagnostic Probe
- Exhaust System: after catalytic converter
- Vehicle Identification Number (VIN) to: J 568589
-
- Oxygen Sensor: Diagnostic Probe, Regulating Probe
- Exhaust System: after catalytic converter, before catalytic converter
- Vehicle Identification Number (VIN) to: J 568589
- Construction Year from: 03/2001
-
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Vehicle Identification Number (VIN) to: J 568589
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 480
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£59,69
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: GCC9220005
Details
-
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Vehicle Identification Number (VIN) from: J 568590
- Vehicle type: <168.132>
-
- Construction Year from: 09/2000
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- not for emission standard: D3
- Vehicle Identification Number (VIN) from: J 568590
-
- Construction Year from: 09/2000
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Emission Standard: D3
- Supplementary Info: Universal
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 480
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with squeeze connector, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£66,52
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 224 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9