Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
-
Suspension
- Wheel hub Mazda RX7 FD 1.3 Twin Turbo (FD3S, FD1031) 239 hp Petrol
- Wheel bearing Mazda RX7 FD 1.3 Twin Turbo (FD3S, FD1031) 239 hp Petrol
- Anti-roll bar link Mazda RX7 FD 1.3 Twin Turbo (FD3S, FD1031) 239 hp Petrol
- Track rod end Mazda RX7 FD 1.3 Twin Turbo (FD3S, FD1031) 239 hp Petrol
- Inner tie rod Mazda RX7 FD 1.3 Twin Turbo (FD3S, FD1031) 239 hp Petrol
- ABS sensor Mazda RX7 FD 1.3 Twin Turbo (FD3S, FD1031) 239 hp Petrol
- Ball joint Mazda RX7 FD 1.3 Twin Turbo (FD3S, FD1031) 239 hp Petrol
- Suspension bushes Mazda RX7 FD 1.3 Twin Turbo (FD3S, FD1031) 239 hp Petrol
- Anti-roll bar bushes Mazda RX7 FD 1.3 Twin Turbo (FD3S, FD1031) 239 hp Petrol
- Wheel bolts and wheel nuts Mazda RX7 FD 1.3 Twin Turbo (FD3S, FD1031) 239 hp Petrol
- Wheel spacers RX-7 1.3 Twin Turbo (FD3S, FD1031) 239 hp Petrol
- Steering rack boot RX-7 1.3 Twin Turbo (FD3S, FD1031) 239 hp Petrol
- Camber bolts RX-7 1.3 Twin Turbo (FD3S, FD1031) 239 hp Petrol
- Wheel nuts RX-7 1.3 Twin Turbo (FD3S, FD1031) 239 hp Petrol
- Nut, stub axle RX-7 1.3 Twin Turbo (FD3S, FD1031) 239 hp Petrol
- Wiper and washer system
Suspension arm Mazda RX7 FD 1.3 Twin Turbo (FD3S, FD1031) 239 hp Petrol
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
MAZDA RX 7 III (FD) 1.3 Twin Turbo (FD3S, FD1031) year of manufacture 1992, 239 hp vehicle parts products
incl. 20% VAT, excl. delivery costs
- Length [mm]: 78
- External Thread [mm]: M12 x 1,25
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Control/Trailing Arm Type: Control Arm
- Paired product: MD-WP-13901
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Packing Type: Box
- Packaging length [cm]: 64
- Packaging width [cm]: 49,5
- Packaging height [cm]: 14,5
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle Left, Lower, Rear Axle Right
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Weight [kg]: 3,100
- Observe service information
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle Left
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 613
- Packaging width [cm]: 6,5
- Packaging height [cm]: 5,5
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 182
- Packaging width [cm]: 5,0
- Packaging height [cm]: 4,5
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle
- Control/Trailing Arm Type: Control Arm
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Left, Front Axle Left
- Control/Trailing Arm Type: Control Arm
- Packaging length [cm]: 44,4
- Packaging width [cm]: 10,2
- Packaging height [cm]: 5,7
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right
- Control/Trailing Arm Type: Control Arm
- Rod/Strut: Suspension Rod
- Fabrication Number: ZWT-MZ-056
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Control/Trailing Arm Type: Control Arm
- Paired product: FD-WP-7998
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Packing Type: Box
- Packaging length [cm]: 61,2
- Packaging width [cm]: 34,4
- Packaging height [cm]: 8,8
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Control/Trailing Arm Type: Control Arm
- Paired product: VKDS 424002
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Bore Diameter [mm]: 12,2
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle Left, Lower, outer
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Paired product: JTC2172
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Control/Trailing Arm Type: Control Arm
- Paired product: VKDS 824040 B
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Mounting Type: Hydro Mount
- Hole Spacing 1/Hole Spacing 2: 273
- Supplementary Article / Supplementary Info: with synthetic grease
- Control/Trailing Arm Design: Triangular Control Arm
- Condition: New
Over 100 in stock
