Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs Mazda mx-5 na 1.8 (NA8C) 131 hp Petrol
- Brake pads Mazda mx-5 na 1.8 (NA8C) 131 hp Petrol
- Brake caliper Mazda mx-5 na 1.8 (NA8C) 131 hp Petrol
- ABS sensor Mazda mx-5 na 1.8 (NA8C) 131 hp Petrol
- Brake caliper repair kit Mazda mx-5 na 1.8 (NA8C) 131 hp Petrol
- Handbrake Mazda mx-5 na 1.8 (NA8C) 131 hp Petrol
- Brake disc back plate Mazda mx-5 na 1.8 (NA8C) 131 hp Petrol
- Brake caliper carrier Mazda mx-5 na 1.8 (NA8C) 131 hp Petrol
- Brake hose Mazda mx-5 na 1.8 (NA8C) 131 hp Petrol
- Master cylinder Mazda mx-5 na 1.8 (NA8C) 131 hp Petrol
- Handbrake cable MX-5 1.8 (NA8C) 131 hp Petrol
- Guide sleeve kit, brake caliper MX-5 1.8 (NA8C) 131 hp Petrol
- Brake fluid MX-5 1.8 (NA8C) 131 hp Petrol
- Brake pad fitting kit MX-5 1.8 (NA8C) 131 hp Petrol
- Brake pads and discs MX-5 1.8 (NA8C) 131 hp Petrol
- Brake light switch MX-5 1.8 (NA8C) 131 hp Petrol
- Brake caliper piston MX-5 1.8 (NA8C) 131 hp Petrol
- High-performance brake pads MX-5 1.8 (NA8C) 131 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Wiper and washer system
Brake discs Mazda mx-5 na 1.8 (NA8C) 131 hp Petrol
Article №: 82B0408
Details
- Fitting Position: Rear Axle
- Diameter: 250
- Brake Disc Type: solid
- Number of Holes: 4/7
- Wheel Bolt Bore Diameter [mm]: 13,1
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness: 9
- Centering Diameter [mm]: 55
- Height: 34,5
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£17.99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0361
Details
- Fitting Position: Front Axle
- Diameter: 255
- Brake Disc Type: Vented
- Number of Holes: 4/5
- Wheel Bolt Bore Diameter [mm]: 13
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness: 20
- Centering Diameter [mm]: 55
- Height: 45,1
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£23.99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBD-0022079
Details
- Fitting Position: Rear Axle
- Diameter: 250
- Brake Disc Type: solid
- Number of Holes: 4/7
- Wheel Bolt Bore Diameter [mm]: 13,1
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness: 9
- Centering Diameter [mm]: 55
- Height: 34,5
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£17.99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BG2805
Details
-
- Fitting Position: Rear Axle
- Construction Year from: 03/1994
- Diameter: 251
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness: 9
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 55
- Height: 35
- Surface: Oiled
- Test Mark: E1 90R-02C0100/1608
- Drilled: no
- Condition: New
More
£19.99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 986 478 701
Details
-
- Construction Year to: 11/1994
- Fitting Position: Rear Axle
- Diameter: 250,5
- Brake Disc Type: solid
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness: 9
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 55,02
- Height: 34,5
- Surface: Oiled
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 13
- Drilled: no
- Condition: New
More
£20.99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADM54328
Details
- Fitting Position: Rear Axle
- Diameter: 251
- Brake Disc Type: solid
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Thickness: 35
- Brake Disc Thickness: 9
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 55
- Surface: Coated
- Number of mounting bores: 3
- Observe service information
- Drilled: no
- Condition: New
More
£20.99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8DD 355 103-191
Details
- Fitting Position: Rear Axle
- Diameter: 250
- Brake Disc Type: solid
- Hole Arrangement/Number: 04/07
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness: 9
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 55
- Height: 34,5
- Weight [kg]: 3,1
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
£20.99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 108493
Details
- Fitting Position: Rear Axle
- Diameter: 251
- Brake Disc Type: solid
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Thickness: 35
- Brake Disc Thickness: 9
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 55
- Surface: Coated
- Number of mounting bores: 3
- Observe service information
- Drilled: no
- Condition: New
More
£20.99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 35-15 523 0005
Details
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Rear Axle
- Diameter: 251
- Brake Disc Type: Vented
- Number of Holes: 4
- Wheel Bolt Bore Diameter [mm]: 13
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness: 9
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 55
- Height: 34,5
- Required quantity: 2
- Drilled: no
- Condition: New
More
£21.99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DF2703
Details
- Fitting Position: Rear Axle
- Diameter: 251
- Brake Disc Type: solid
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness: 9
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 55
- Height: 34,5
- Surface: Painted
- Thread Size: 13
- Colour: black
- Test Mark: E190R-02C0190/0152
- Drilled: no
- Condition: New
More
£22.49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBD-0020366
Details
- Fitting Position: Front Axle
- Diameter: 255
- Brake Disc Type: Vented
- Number of Holes: 4/5
- Wheel Bolt Bore Diameter [mm]: 13
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness: 20
- Centering Diameter [mm]: 55
- Height: 45,1
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£23.99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6148.00
Details
- Fitting Position: Rear Axle
- Diameter: 250
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness: 9
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 55
- Height: 34,5
- Weight [kg]: 3,07
- Test Mark: K.B.A.: 61210
- Drilled: no
- Condition: New
More
£24.49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 16088
Details
-
- Fitting Position: Rear Axle
- Vehicle type: Roadster
- Diameter: 250
- Brake Disc Type: solid
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness: 9
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 55
- Hub Diameter [mm]: 135
- Height: 34,5
- Weight [kg]: 3,05
- Drilled: no
- Condition: New
More
£25.99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 92061700
Details
- Fitting Position: Rear Axle
- Diameter: 250
- Brake Disc Type: solid
- Hole Arrangement/Number: 04/07
- Wheel Bolt Bore Diameter [mm]: 13,1
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness: 9
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 55
- Inner Diameter [mm]: 125
- Height: 34,5
- Weight [kg]: 3,1
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 27,8
- Packaging width [cm]: 27,8
- Packaging height [cm]: 10,5
- Drilled: no
- Condition: New
More
£26.49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-1171
Details
- Fitting Position: Rear Axle
- Diameter: 251
- Brake Disc Type: solid
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness: 9
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 55
- Height: 34,5
- Weight [kg]: 3
- Surface: Painted
- Test Mark: E190R02 02C0190/0152
- Drilled: no
- Condition: New
More
£26.99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 23-0665
Details
-
- Fitting Position: Rear Axle
- Construction Year from: 01/1994
- Diameter: 250,0
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness: 9,0
- Minimum thickness [mm]: 8,0
- Centering Diameter [mm]: 55,0
- Height: 34,5
- Test Mark: ECE-R90
- Drilled: no
- Condition: New
More
£27.49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6386.10
Details
- Fitting Position: Front Axle
- Diameter: 235
- Brake Disc Type: Vented
- Number of Holes: 4
- Brake Disc Thickness: 18
- Minimum thickness [mm]: 16
- Centering Diameter [mm]: 55
- Height: 45
- Weight [kg]: 3,59
- Test Mark: K.B.A.: 61209
- Drilled: no
- Condition: New
More
£27.99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0361P
Details
- Fitting Position: Front Axle
- Diameter: 255
- Brake Disc Type: Vented
- Number of Holes: 4/5
- Wheel Bolt Bore Diameter [mm]: 13
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness: 20
- Centering Diameter [mm]: 55
- Height: 45,1
- Surface: Coated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£28.56
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6843.10
Details
- Fitting Position: Front Axle
- Diameter: 255
- Brake Disc Type: Vented
- Number of Holes: 4
- Brake Disc Thickness: 20
- Minimum thickness [mm]: 18
- Centering Diameter [mm]: 55
- Height: 45
- Weight [kg]: 4,48
- Test Mark: K.B.A.: 61209
- Drilled: no
- Condition: New
More
£28.99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 25529
Details
- Fitting Position: Front Axle
- Diameter: 255
- Brake Disc Type: Vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness: 20
- Minimum thickness [mm]: 18
- Weight [kg]: 2,4
- Drilled: no
- Condition: New
More
£30.49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 16458
Details
-
- Fitting Position: Front Axle
- Vehicle type: Roadster
- Diameter: 255
- Brake Disc Type: Vented
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness: 20
- Minimum thickness [mm]: 18
- Centering Diameter [mm]: 55
- Hub Diameter [mm]: 135
- Height: 45
- Weight [kg]: 4,48
- Surface: Coated
- Drilled: no
- Condition: New
More
£32.49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 23-0999
Details
-
- Braking/Drive Dynamics: for vehicles with ABS
- Fitting Position: Front Axle
- Construction Year from: 01/1994
- Diameter: 255
- Brake Disc Type: Vented
- Number of Holes: 4
- Brake Disc Thickness: 20,0
- Minimum thickness [mm]: 18,0
- Centering Diameter [mm]: 55,1
- Height: 45,1
- Test Mark: ECE-R90, ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£32.99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: A32-40004
Details
- Fitting Position: Rear Axle
- Diameter: 251
- Brake Disc Type: solid
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness: 9
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 55
- Inner Diameter [mm]: 125
- Height: 34,5
- Thread Size: 13
- Bore Diameter [mm]: 13
- fulfils ECE norm: R90
- Packaging width [cm]: 26
- Packaging height [cm]: 26
- Packaging Depth [cm]: 7
- Drilled: no
- Condition: New
More
£36.49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-3558
Details
- Fitting Position: Front Axle
- Diameter: 255
- Brake Disc Type: Vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100, 100,0
- Brake Disc Thickness: 20
- Minimum thickness [mm]: 18
- Centering Diameter [mm]: 55
- Height: 45
- Surface: Painted
- Colour: black
- Drilled: no
- Condition: New
More
£39.99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCH20394
Details
- Fitting Position: Rear Axle
- Diameter: 250
- Brake Disc Type: solid
- Number of Holes: 4/7
- Wheel Bolt Bore Diameter [mm]: 13,1
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness: 9
- Centering Diameter [mm]: 55
- Height: 34,5
- Surface: Coated
- Material: Grey Cast Iron
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Drilled: no
- Condition: New
More
£55.94
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 102 products
Show the next items
- 1
- 2
- 3
- 4
- 5
