Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
-
Ignition and preheating
- Spark plugs ES 250 V20 300 (VCV10_) 188 hp Petrol
- Ignition coil ES 250 V20 300 (VCV10_) 188 hp Petrol
- Ignition leads ES 250 V20 300 (VCV10_) 188 hp Petrol
- Distributor cap ES 250 V20 300 (VCV10_) 188 hp Petrol
- Timing cover gasket ES 250 V20 300 (VCV10_) 188 hp Petrol
- Knock sensor ES 250 V20 300 (VCV10_) 188 hp Petrol
- Distributor rotor ES 250 V20 300 (VCV10_) 188 hp Petrol
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Wiper and washer system
Spark plugs ES 250 V20 300 (VCV10_) 188 hp Petrol
Article №: 686S0002
Details
-
- Construction Year from: 03/1992
- Construction Year to: 08/1996
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 6
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Spark Plug: Nickel Middle Electrode, Fixed SAE connector, 1 - Earthed Electrode
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
-37%
compared to RRP:
£3,70
£2,32
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0027
Details
-
- Construction Year to: 08/1993, 08/1996
- Required quantity: 6
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
-48%
compared to RRP:
£4,50
£2,32
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0081
Details
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 4
- Electrode Gap [mm]: 1
- Spanner Size: 16 mm
- Spark Plug: Connector Type SAE, with gasket seat
- Construction Year to: 08/1996
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 4
- Tightening angle [degrees]: 90
- Condition: New
More
-41%
compared to RRP:
£8,70
£5,11
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0030
Details
-
- Construction Year from: 03/1992
- Construction Year to: 08/1996
- Fuel Type: CNG/LPG
- Replace after km: 30000
- Required quantity: 6
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,7
- Spanner Size: 16 mm
- Spark Plug: Iridium Middle Electrode, Fixed SAE connector, 1 - Earthed Electrode
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
-53%
compared to RRP:
£16,10
£7,43
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0065
Details
-
- Construction Year from: 03/1992
- Construction Year to: 08/1996
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 6
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£9,29
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0316
Details
-
- Construction Year to: 08/1993, 08/1996
- Required quantity: 6
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£9,29
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0029
Details
-
- Construction Year from: 01/1993
- Engine Code: 2JZ-GE
- Product line: LPG Laser Line
- Thread Length [mm]: 19
- Spanner Size: 16 mm
- Spark Plug: Fixed SAE connector, 1 - Earthed Electrode
- Thread Size: M14 x 1,25
- Fuel Type: CNG/LPG
- Recommended change interval [km]: 60000
- Condition: New
More
£9,76
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0066
Details
-
- Construction Year from: 03/1992
- Construction Year to: 08/1996
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 6
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£13,94
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0326
Details
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Electrode Gap [mm]: 1
- Spanner Size: 16 mm
- Construction Year to: 08/1996
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 4
- Tightening angle [degrees]: 90
- Condition: New
More
£20,45
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8EH 188 704-181
CM7RP-11
Details
- Thread Length [mm]: 19
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode
- Construction Year to: 08/1993
- Thread Size: M14 x 1,25
- Tightening Torque [Nm]: 30
- Assy./disassy. by qualified personnel required!
- Condition: New
More
-11%
compared to RRP:
£2,09
£1,85
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990001
Details
-
- Construction Year from: 03/1992
- Construction Year to: 08/1996
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 6
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Spark Plug: Nickel Middle Electrode, Fixed SAE connector, 1 - Earthed Electrode
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
-37%
compared to RRP:
£3,70
£2,32
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990013
Details
-
- Construction Year to: 08/1993, 08/1996
- Required quantity: 6
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
-48%
compared to RRP:
£4,50
£2,32
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 235 666
FR 7 D+, Blister N01 - FR 7 DC
Details
-
- Construction Year from: 03/1992
- Construction Year to: 08/1996
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 6
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£2,32
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0002P
Details
-
- Construction Year from: 03/1992
- Construction Year to: 08/1996
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 6
- Product line: Nickel
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Resistor [kOhm]: 6
- Spark Plug Head: Fixed SAE connector
- Condition: New
More
£2,76
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0027P
Details
-
- Construction Year to: 08/1993, 08/1996
- Required quantity: 6
- Product line: Nickel
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Spark Plug: Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Resistor [kOhm]: 6
- Condition: New
More
£3,12
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 229 660
FR 8 DCX+, Blister N23 - FR 8 DCX
Details
-
- Construction Year to: 08/1993, 08/1996
- Required quantity: 6
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£3,25
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: U20FS-U
Details
- Product line: Nickel
- Thread Length [mm]: 12,7
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
- Thread Size: M10x1.0
- Connector type: Thread M4
- Tightening Torque [Nm]: 12
- Diameter [mm]: 10
- Weight [g]: 28,5
- alternative item: IUF22
- Condition: New
More
£3,71
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCF860001
Details
-
- Construction Year from: 03/1992
- Construction Year to: 08/1996
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 6
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£3,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V99-75-0010
Details
-
- Construction Year from: 03/1992
- Construction Year to: 08/1996
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Product line: Q+, original equipment manufacturer quality
- Electrode Gap [mm]: 0,7
- Spark Plug: 1 - Earthed Electrode
- Version: E7EC1
- Length [mm]: 126
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Condition: New
More
-11%
compared to RRP:
£6,32
£5,57
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V99-75-0012
Details
-
- Construction Year from: 03/1992
- Construction Year to: 08/1996
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Product line: Q+, original equipment manufacturer quality
- Electrode Gap [mm]: 0,7
- Spark Plug: 1 - Earthed Electrode
- Version: VR7EC1
- Length [mm]: 126
- Height [mm]: 51
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Condition: New
More
-14%
compared to RRP:
£6,49
£5,57
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0081P
Details
-
- Construction Year to: 08/1996
- Required quantity: 6
- Product line: Nickel
- Thread Length [mm]: 19
- Spark Position [mm]: 5
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Spark Plug: Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Resistor [kOhm]: 6
- Condition: New
More
£6,23
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990064
Details
-
- Construction Year from: 03/1992
- Construction Year to: 08/1996
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 6
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£9,29
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0065P
Details
-
- Construction Year from: 03/1992
- Construction Year to: 08/1996
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 6
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£11,04
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0316P
Details
-
- Construction Year to: 08/1993, 08/1996
- Required quantity: 6
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£12,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0066P
Details
-
- Construction Year from: 03/1992
- Construction Year to: 08/1996
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 6
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£16,55
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 78 products
Show the next items
- 1
- 2
- 3
- 4
