Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs Land Rover Range Rover 2 4.6 4x4 224 hp Petrol
- Brake pads Land Rover Range Rover 2 4.6 4x4 224 hp Petrol
- Brake caliper Land Rover Range Rover 2 4.6 4x4 224 hp Petrol
- Drum brake Land Rover Range Rover 2 4.6 4x4 224 hp Petrol
- ABS sensor Land Rover Range Rover 2 4.6 4x4 224 hp Petrol
- Brake caliper repair kit Land Rover Range Rover 2 4.6 4x4 224 hp Petrol
- Handbrake Land Rover Range Rover 2 4.6 4x4 224 hp Petrol
- Brake caliper carrier Land Rover Range Rover 2 4.6 4x4 224 hp Petrol
- Brake shoes Land Rover Range Rover 2 4.6 4x4 224 hp Petrol
- Brake hose Land Rover Range Rover 2 4.6 4x4 224 hp Petrol
- Master cylinder RANGE ROVER 4.6 4x4 224 hp Petrol
- Handbrake cable RANGE ROVER 4.6 4x4 224 hp Petrol
- Guide sleeve kit, brake caliper RANGE ROVER 4.6 4x4 224 hp Petrol
- Handbrake shoes RANGE ROVER 4.6 4x4 224 hp Petrol
- Brake fluid RANGE ROVER 4.6 4x4 224 hp Petrol
- Brake pad fitting kit RANGE ROVER 4.6 4x4 224 hp Petrol
- Wheel cylinder RANGE ROVER 4.6 4x4 224 hp Petrol
- Accessory kit, brake shoes RANGE ROVER 4.6 4x4 224 hp Petrol
- Brake pads and discs RANGE ROVER 4.6 4x4 224 hp Petrol
- Brake light switch RANGE ROVER 4.6 4x4 224 hp Petrol
- Brake caliper piston RANGE ROVER 4.6 4x4 224 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs Land Rover Range Rover 2 4.6 4x4 224 hp Petrol
Article №: BDC4804
Details
- Fitting Position: Front Axle
- Diameter [mm]: 297
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 70
- Height [mm]: 64,8
- Drilled: no
- Condition: New
More
£ 45,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DDF874C
Details
- Product line: PREMIER Coat+ disc
- Fitting Position: Rear Axle
- Diameter [mm]: 304
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 12,6
- Minimum thickness [mm]: 11,7
- Centering Diameter [mm]: 70
- Height [mm]: 62,7
- Weight [kg]: 6,82
- Surface: Coated
- Tightening Torque [Nm]: 140
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Packaging length [cm]: 33
- Packaging width [cm]: 33
- Packaging height [cm]: 14,5
- Drilled: no
- Condition: New
More
£ 46,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 986 478 483
Details
-
- Construction Year from: 09/1994
- Fitting Position: Front Axle
- Diameter [mm]: 297
- Brake Disc Type: Vented, internally vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 70,04
- Height [mm]: 64,6
- Surface: Oiled
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 14,4
- Drilled: no
- Condition: New
More
£ 48,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADJ134319
Details
- Fitting Position: Front Axle
- Diameter [mm]: 297
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 120
- Thickness [mm]: 65
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 70
- Weight [kg]: 8,77
- Surface: Coated
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Condition: New
More
£ 48,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DDF873C
Details
- Product line: PREMIER
- Fitting Position: Front Axle
- Diameter [mm]: 297
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 70
- Height [mm]: 64,6
- Weight [kg]: 8,56
- Surface: Coated
- Tightening Torque [Nm]: 140
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Packaging length [cm]: 31,5
- Packaging width [cm]: 31,5
- Packaging height [cm]: 15
- Drilled: no
- Condition: New
More
£ 48,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24.0113-0197.1
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 304,5
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120,0
- Brake Disc Thickness [mm]: 12,6
- Minimum thickness [mm]: 11,7
- Centering Diameter [mm]: 70,0
- Inner Diameter [mm]: 161,5
- Height [mm]: 62,8
- Surface: Coated
- MAPP code available
- Test Mark: E1 90R-02C0165/1115
- Bore Diameter [mm]: 14,3
- Drilled: no
- Condition: New
More
£ 49,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 45-83 521 0005/PD
Details
- Fitting Position: Front Axle
- Diameter [mm]: 297
- Brake Disc Type: Vented
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: 14,3
- Bolt Hole Circle Ø [mm]: 120
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 70
- Height [mm]: 64,7
- Surface: Zink flake coated
- Machining: High-carbon
- Required quantity: 2
- Quality: PREMIUM
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£ 51,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DF2766
Details
- Fitting Position: Front Axle
- Diameter [mm]: 297
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 70
- Height [mm]: 64,7
- Surface: Painted
- Machining: High-carbon
- Thread Size: 14,25
- Colour: black
- Drilled: no
- Condition: New
More
£ 52,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 450.5222.20
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 304
- Brake Disc Type: solid
- Rim Hole Number: 5
- Hole Arrangement/Number: 6/5
- Bolt Hole Circle Ø [mm]: 120
- Brake Disc Thickness [mm]: 13
- Minimum thickness [mm]: 11,7
- Centering Diameter [mm]: 70
- Height [mm]: 63
- Weight [kg]: 6,6
- Surface: Coated
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£ 53,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8DD 355 106-371
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 304
- Brake Disc Type: solid
- Hole Arrangement/Number: 05/06
- Wheel Bolt Bore Diameter [mm]: 14,4
- Bolt Hole Circle Ø [mm]: 120
- Brake Disc Thickness [mm]: 12,6
- Minimum thickness [mm]: 11,7
- Centering Diameter [mm]: 70
- Inner Diameter [mm]: 161,6
- Height [mm]: 62,7
- Weight [kg]: 6,7
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
£ 56,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 09.6839.11
Details
- Product line: Prime
- Fitting Position: Front Axle
- Diameter [mm]: 297
- Brake Disc Type: internally vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 70
- Height [mm]: 65
- Surface: Coated
- Tightening Torque [Nm]: 140
- Drilled: no
- Condition: New
More
£ 57,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6503.10
Details
- Fitting Position: Front Axle
- Diameter [mm]: 297
- Brake Disc Type: Vented
- Number of Holes: 5
- Construction Year from: 09/1994
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 70
- Height [mm]: 64,6
- Weight [kg]: 8,1
- Test Mark: K.B.A.: 61209
- Drilled: no
- Condition: New
More
£ 62,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 17843
Details
- Product line: COATED
- Fitting Position: Rear Axle
- Diameter [mm]: 354
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 120
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10,4
- Centering Diameter [mm]: 79
- Hub Diameter [mm]: 224
- Height [mm]: 75
- Weight [kg]: 8,8
- Surface: Coated
- Drilled: no
- Condition: New
More
£ 64,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24.0125-0164.1
Details
- Fitting Position: Front Axle
- Diameter [mm]: 297,0
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120,0
- Brake Disc Thickness [mm]: 25,0
- Minimum thickness [mm]: 22,0
- Centering Diameter [mm]: 70,0
- Inner Diameter [mm]: 161,5
- Height [mm]: 64,7
- Surface: Coated
- MAPP code available
- Test Mark: E1 90R-02C0118/0067
- Bore Diameter [mm]: 14,3
- Drilled: no
- Condition: New
More
£ 66,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8DD 355 106-271
Details
- Fitting Position: Front Axle
- Diameter [mm]: 297
- Brake Disc Type: Externally Vented
- Hole Arrangement/Number: 05/06
- Bolt Hole Circle Ø [mm]: 120
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 70
- Height [mm]: 64,6
- Weight [kg]: 8,1
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
£ 83,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BS-5060C
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 304
- Brake Disc Type: solid
- Hole Arrangement/Number: 5/6
- Brake Disc Thickness [mm]: 12,6
- Minimum thickness [mm]: 11,7
- Centering Diameter [mm]: 70,1
- Height [mm]: 62,7
- Surface: Coated
- Drilled: no
- Condition: New
More
Article №: 3763200400
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 304
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 12,6
- Surface: Coated
- Drilled: no
- Condition: New
More
£ 21,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 3763200209
Details
- Supplementary Info: QH
- Fitting Position: Rear Axle
- Diameter [mm]: 304
- Brake Disc Type: solid
- Hole Arrangement/Number: 7/5
- Brake Disc Thickness [mm]: 12,6
- Drilled: no
- Condition: New
More
£ 22,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: DP-L07
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 304
- Brake Disc Type: solid
- Number of bores: 5
- Bolt Hole Circle Ø [mm]: 70
- Brake Disc Thickness [mm]: 13
- Minimum thickness [mm]: 11
- Height [mm]: 63
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£ 25,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: BD1714
Details
- Fitting Position: Rear Axle
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø 1 [mm]: 120
- Brake Disc Thickness [mm]: 12,5
- Hub Diameter 1 [mm]: 70,1
- Drilled: no
- Condition: New
More
£ 27,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 24.0113-0191.1
Details
- Diameter [mm]: 304,0
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120,0
- Brake Disc Thickness [mm]: 12,6
- Minimum thickness [mm]: 11,7
- Centering Diameter [mm]: 70,0
- Inner Diameter [mm]: 161,8
- Height [mm]: 62,7
- Bore Diameter [mm]: 14,2
- Drilled: no
- Condition: New
More
£ 28,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: C4I001ABE
Details
-
- Construction Year from: 11/1994
- Construction Year to: 02/2002
- Fitting Position: Rear Axle
- Diameter [mm]: 304
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 14,3, 120
- Thickness [mm]: 12,6
- Brake Disc Thickness [mm]: 12,6
- Minimum thickness [mm]: 11,7
- Centering Diameter [mm]: 70
- Inner Diameter [mm]: 161,5
- Height [mm]: 62,7
- Surface: Coated
- Drilled: no
- Condition: New
More
£ 30,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 24012501321PR-PCS-MS
Details
- Fitting Position: Front Axle
- Diameter [mm]: 297
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 70
- Inner Diameter [mm]: 161,5
- Height [mm]: 64,7
- Surface: Coated
- Required quantity: 2
- Bore Diameter [mm]: 14,3
- Condition: New
More
£ 33,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: BS-5060
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 304
- Brake Disc Type: solid
- Hole Arrangement/Number: 5/6
- Brake Disc Thickness [mm]: 12,6
- Minimum thickness [mm]: 11,7
- Centering Diameter [mm]: 70,1
- Height [mm]: 62,7
- Drilled: no
- Condition: New
More
£ 34,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: SKBD-0023042
Details
- Fitting Position: Front Axle
- Diameter [mm]: 297
- Brake Disc Type: Vented
- Number of Holes: 5/6
- Wheel Bolt Bore Diameter [mm]: 14,1
- Bolt Hole Circle Ø [mm]: 120
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 70,1
- Height [mm]: 64,5
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£ 45,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Showing 25 out of 135 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
