Car part
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs LAND ROVER Range Rover I 3.9 4x4 185 hp Petrol
- Brake pads LAND ROVER Range Rover I 3.9 4x4 185 hp Petrol
- Brake caliper LAND ROVER Range Rover I 3.9 4x4 185 hp Petrol
- Brake caliper repair kit LAND ROVER Range Rover I 3.9 4x4 185 hp Petrol
- Handbrake LAND ROVER Range Rover I 3.9 4x4 185 hp Petrol
- Master cylinder LAND ROVER Range Rover I 3.9 4x4 185 hp Petrol
- Brake hose LAND ROVER Range Rover I 3.9 4x4 185 hp Petrol
- Handbrake cable LAND ROVER Range Rover I 3.9 4x4 185 hp Petrol
- Handbrake shoes LAND ROVER Range Rover I 3.9 4x4 185 hp Petrol
- Brake fluid LAND ROVER Range Rover I 3.9 4x4 185 hp Petrol
- Brake pad fitting kit RANGE ROVER 3.9 4x4 185 hp Petrol
- Brake servo RANGE ROVER 3.9 4x4 185 hp Petrol
- Accessory kit, brake shoes RANGE ROVER 3.9 4x4 185 hp Petrol
- Brake caliper piston RANGE ROVER 3.9 4x4 185 hp Petrol
- Performance brake discs RANGE ROVER 3.9 4x4 185 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs LAND ROVER Range Rover I 3.9 4x4 185 hp Petrol
Article №: 82B0904
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 289,6
- Brake Disc Type: solid
- Number of Holes: 5/10
- Wheel Bolt Bore Diameter [mm]: 10,3
- Bolt Hole Circle Ø [mm]: 127
- Brake Disc Thickness [mm]: 12.6
- Minimum thickness [mm]: 11,7
- Centering Diameter [mm]: 101.7
- Inner Diameter [mm]: 162
- Height [mm]: 61,2
- Surface: Uncoated
- Braking System: for vehicles with disc brakes on the rear axle
- Material: Cast Iron
- Bore Diameter [mm]: 10,3
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-43%
compared to RRP:
£ 50,70
£ 28,66
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0987
Details
- Fitting Position: Front Axle
- Diameter [mm]: 298,1
- Brake Disc Type: Vented
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: 10,3
- Bolt Hole Circle Ø [mm]: 127
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 101,7
- Inner Diameter [mm]: 158,4
- Wheel Hub Diameter [mm]: 101,7
- Height [mm]: 81
- Surface: Uncoated
- Vehicle Identification Number (VIN) from: GA
- Material: Cast Iron
- Bore Diameter [mm]: 10,3
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-47%
compared to RRP:
£ 69,30
£ 36,65
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BDC4726
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 290
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 127
- Brake Disc Thickness [mm]: 12,6
- Minimum thickness [mm]: 11,6
- Centering Diameter [mm]: 101
- Height [mm]: 61,5
- Drilled: no
- Condition: New
More
Article №: BG2799
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 291
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 12,7
- Minimum thickness [mm]: 11,7
- Centering Diameter [mm]: 101,6
- Height [mm]: 61,5
- Surface: Oiled
- Test Mark: E1 90R-02C0100/1617
- Drilled: no
- Condition: New
More
£ 29,60
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DF1802
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 290
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 136
- Brake Disc Thickness [mm]: 12,5
- Minimum thickness [mm]: 11,7
- Centering Diameter [mm]: 101,6
- Height [mm]: 61,5
- Surface: Painted
- Thread Size: 6,5
- Colour: black
- Test Mark: E1 90R-02 C0190/0676
- Drilled: no
- Condition: New
More
-74%
compared to RRP:
£ 132,57
£ 33,36
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 986 478 656
Details
-
- Engine Code: 35D, 36D
- Fitting Position: Rear Axle
- Vehicle Identification Number (VIN) from: CA
- Diameter [mm]: 289,6
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 136
- Brake Disc Thickness [mm]: 12,6
- Minimum thickness [mm]: 11,7
- Centering Diameter [mm]: 101,7
- Height [mm]: 61,2
- Surface: Oiled
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 10,3
- Drilled: no
- Condition: New
More
£ 34,77
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BDC3797
Details
- Fitting Position: Front Axle
- Diameter [mm]: 298
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 127
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 101
- Height [mm]: 70,3
- Drilled: no
- Condition: New
More
-71%
compared to RRP:
£ 120,22
£ 34,77
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DDF262
Details
- Product line: PREMIER
- Fitting Position: Front Axle
- Diameter [mm]: 298
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 127
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 101,6
- Height [mm]: 70
- Surface: Oiled
- Tightening Torque [Nm]: 130
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packing Type: Box
- Packaging length [cm]: 32
- Packaging width [cm]: 32
- Packaging height [cm]: 14
- Drilled: no
- Condition: New
More
£ 36,65
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 23-0359
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 290,0
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 12,5
- Centering Diameter [mm]: 101,7
- Height [mm]: 61,4
- Test Mark: ECE-R90
- Drilled: no
- Condition: New
More
£ 39,47
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 15616
Details
- Product line: COATED
- Fitting Position: Rear Axle
- Diameter [mm]: 290
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 127
- Brake Disc Thickness [mm]: 12,6
- Minimum thickness [mm]: 11,7
- Centering Diameter [mm]: 102
- Hub Diameter [mm]: 180
- Height [mm]: 61,2
- Weight [kg]: 6,7
- Surface: Coated
- Drilled: no
- Condition: New
More
-40%
compared to RRP:
£ 67,36
£ 40,41
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 561629JC
Details
- Fitting Position: Front Axle
- Diameter [mm]: 298
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 127
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 101,6
- Height [mm]: 70
- Weight [kg]: 17,09
- Surface: Coated
- Tightening Torque [Nm]: 130
- Version: JC
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packing Type: Box
- Packaging length [cm]: 31
- Packaging width [cm]: 31
- Packaging height [cm]: 16
- Drilled: no
- Condition: New
More
-68%
compared to RRP:
£ 127,38
£ 40,41
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 08.5316.10
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 290
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 12,6
- Minimum thickness [mm]: 11,7
- Centering Diameter [mm]: 101
- Height [mm]: 62
- Tightening Torque [Nm]: 130
- Drilled: no
- Condition: New
More
£ 40,41
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: A4201V
Details
- Fitting Position: Front Axle
- Diameter [mm]: 298
- Number of Holes: 5
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Height [mm]: 70
- Drilled: no
- Condition: New
More
£ 42,29
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 23-0422
Details
-
- Fitting Position: Front Axle
- Construction Year to: 12/1990
- Diameter [mm]: 298,5
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 14,0
- Centering Diameter [mm]: 101,6
- Height [mm]: 70,0
- Test Mark: ECE-R90
- Drilled: no
- Condition: New
More
£ 43,23
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BG2612C
Details
- Fitting Position: Front Axle
- Diameter [mm]: 298
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 101,6
- Height [mm]: 70,1
- Surface: Coated
- Test Mark: E1 90R-02C0074/1564
- Drilled: no
- Condition: New
More
£ 44,17
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 09.5488.11
Details
- Product line: COATED DISC LINE
- Fitting Position: Front Axle
- Diameter [mm]: 298
- Brake Disc Type: internally vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 102
- Height [mm]: 70
- Surface: Coated
- Tightening Torque [Nm]: 130
- Drilled: no
- Condition: New
More
£ 44,17
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 986 478 824
Details
-
- Engine Code: 35D, 36D
- Fitting Position: Front Axle
- Vehicle Identification Number (VIN) from: GA
- Diameter [mm]: 298,1
- Brake Disc Type: Vented, internally vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 127
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 101,7
- Height [mm]: 70
- Surface: Coated
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 10,3
- Drilled: no
- Condition: New
More
£ 44,17
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-1178
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 290
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 136
- Brake Disc Thickness [mm]: 12,5
- Minimum thickness [mm]: 11,7
- Centering Diameter [mm]: 101,6
- Height [mm]: 61,5
- Surface: Painted, Coated
- Technical Information Number: 98200 2305 0 1 PRO
- Supplementary Article / Supplementary Info Info 2: without wheel studs
- Packaging length [cm]: 33,5
- Packaging width [cm]: 32
- Packaging height [cm]: 13,5
- Drilled: no
- Condition: New
More
£ 44,64
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 16135
Details
- Fitting Position: Front Axle
- Diameter [mm]: 298
- Brake Disc Type: Vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 127
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 102
- Hub Diameter [mm]: 171
- Height [mm]: 70
- Weight [kg]: 8,47
- Drilled: no
- Condition: New
More
-26%
compared to RRP:
£ 65,57
£ 47,93
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8DD 355 103-161
Details
- Fitting Position: Front Axle
- Diameter [mm]: 298
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 05/05
- Wheel Bolt Bore Diameter [mm]: 10,3
- Bolt Hole Circle Ø [mm]: 127
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 101,7
- Inner Diameter [mm]: 158,4
- Height [mm]: 70
- Weight [kg]: 8,5
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
-58%
compared to RRP:
£ 114,69
£ 47,93
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 23-0237
Details
-
- Construction Year from: 01/1990
- Fitting Position: Front Axle
- Diameter [mm]: 298,0
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 24,0
- Minimum thickness [mm]: 22,0
- Centering Diameter [mm]: 101,6
- Height [mm]: 70,0
- Test Mark: ECE-R90
- Drilled: no
- Condition: New
More
£ 53,57
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 92061300
Details
- Fitting Position: Front Axle
- Diameter [mm]: 298
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 05/05
- Wheel Bolt Bore Diameter [mm]: 10,3
- Bolt Hole Circle Ø [mm]: 127
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 101,7
- Inner Diameter [mm]: 158,4
- Height [mm]: 70
- Weight [kg]: 8,5
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 30,8
- Packaging width [cm]: 30,8
- Packaging height [cm]: 16
- Drilled: no
- Condition: New
More
-52%
compared to RRP:
£ 113,58
£ 54,51
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DF1803
Details
- Fitting Position: Front Axle
- Diameter [mm]: 299
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 127
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 101,6
- Height [mm]: 70
- Machining: High-carbon
- Thread Size: 10
- Test Mark: E1 90R-02 C0176/0199
- Drilled: no
- Condition: New
More
-45%
compared to RRP:
£ 118,79
£ 64,38
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BS-3400C
Details
- Fitting Position: Front Axle
- Diameter [mm]: 298
- Brake Disc Type: Vented
- Hole Arrangement/Number: 5/5
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 101,7
- Height [mm]: 70
- Surface: Coated
- Drilled: no
- Condition: New
More
Article №: C3I001ABE
Details
-
- Engine Code: 35D, 36D
- Vehicle Identification Number (VIN) from: GA
- Fitting Position: Front Axle
- Diameter [mm]: 298
- Brake Disc Type: Vented
- Number of Holes: 5
- Thickness [mm]: 24
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 101,6
- Height [mm]: 70
- Material: Grey Cast Iron
- Drilled: no
- Condition: New
More
£ 29,60
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Showing 25 out of 62 products
Show the next items
- 1
- 2
- 3
