Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
-
Suspension
- Wheel hub Land Rover Discovery 1 4.0 4x4 185 hp Petrol
- Wheel bearing Land Rover Discovery 1 4.0 4x4 185 hp Petrol
- Top strut mount and bearing Land Rover Discovery 1 4.0 4x4 185 hp Petrol
- Anti-roll bar link Land Rover Discovery 1 4.0 4x4 185 hp Petrol
- Track rod end Land Rover Discovery 1 4.0 4x4 185 hp Petrol
- Inner tie rod Land Rover Discovery 1 4.0 4x4 185 hp Petrol
- ABS sensor Land Rover Discovery 1 4.0 4x4 185 hp Petrol
- Ball joint Land Rover Discovery 1 4.0 4x4 185 hp Petrol
- Suspension bushes Land Rover Discovery 1 4.0 4x4 185 hp Petrol
- Shock absorber dust cover and bump stops Land Rover Discovery 1 4.0 4x4 185 hp Petrol
- Anti-roll bar bushes DISCOVERY 4.0 4x4 185 hp Petrol
- Wheel bolts and wheel nuts DISCOVERY 4.0 4x4 185 hp Petrol
- Sway bar DISCOVERY 4.0 4x4 185 hp Petrol
- Wheel nuts DISCOVERY 4.0 4x4 185 hp Petrol
- Mounting, shock absorbers DISCOVERY 4.0 4x4 185 hp Petrol
- Repair kit, support- / steering link DISCOVERY 4.0 4x4 185 hp Petrol
- Shock absorber mounting brackets DISCOVERY 4.0 4x4 185 hp Petrol
- Towbar / parts
- Wiper and washer system
Wheel hub Land Rover Discovery 1 4.0 4x4 185 hp Petrol
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
LAND ROVER Discovery I (LJ) 4.0 4x4 year of manufacture 1993, 185 hp vehicle parts products
incl. 20% VAT, excl. delivery costs
- Rim Hole Number: 5
- Number of Teeth: 31
- Diameter [mm]: 158,5
- Supplementary Article / Supplementary Info: without accessories
- Thread Size: M14X1,5
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front axle both sides, Rear Axle both sides
- Number of Teeth: 30
- Width [mm]: 97
- Outer Diameter 2 [mm]: 156
- Diameter [mm]: 79
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle Left, Front Axle Right
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 114
- Number of Teeth: 28
- Diameter [mm]: 139
- Thread Size: M12x1,5
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle Right, Rear Axle Left, Right
- Supplementary Article / Supplementary Info Info 2: with wheel studs
- Fabrication Number: KLT-LR-002P
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Inner Diameter [mm]: 44
- Diameter [mm]: 142
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle
- Rim Hole Number: 5
- Supplementary Article / Supplementary Info Info 2: with wheel studs
- Bolt Hole Circle Ø [mm]: 120
- Number of Teeth: 31
- Diameter [mm]: 158,5
- for wheel bearing diameter [mm]: 50
- Thread Size: M14x1.5
- Number of Teeth on input shaft: 31
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info Info 2: with ABS sensor ring
- Number of Teeth, ABS ring: 88
- Packaging length [cm]: 13,7
- Packaging width [cm]: 13,7
- Packaging height [cm]: 10,9
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle
- Weight [kg]: 2,955
- Packaging length [cm]: 16,0
- Packaging width [cm]: 16,0
- Packaging height [cm]: 11,0
- Condition: New
Over 100 in stock
Wheel Hub 120, Rear Axle, without wheel bearing, with wheel studs (SWAG)
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info Info 2: without wheel bearing, with wheel studs
- Bolt Hole Circle Ø [mm]: 120
- Inner Diameter [mm]: 35
- Width [mm]: 77
- Diameter [mm]: 158,5, 50
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle
- Rim Hole Number: 5
- Distance of mounting bores [mm]: 108
- Diameter [mm]: 136
- Thread Size: M14x1,5
- Number of Teeth on input shaft: 31
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle, Left, Right
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 120
- Weight [kg]: 2,91
- Diameter [mm]: 158,5
- for wheel bearing diameter [mm]: 50
- Number of Teeth on input shaft: 31
- Always compare old and new part (in particular OE No.)
- Condition: New
Over 100 in stock
