Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
-
Suspension
- Suspension arm Land Rover Defender Pickup 2.4 Td4 4x4 (L317) 122 hp Diesel
- Wheel hub Land Rover Defender Pickup 2.4 Td4 4x4 (L317) 122 hp Diesel
- Wheel bearing Land Rover Defender Pickup 2.4 Td4 4x4 (L317) 122 hp Diesel
- Top strut mount and bearing Land Rover Defender Pickup 2.4 Td4 4x4 (L317) 122 hp Diesel
- Anti-roll bar link Land Rover Defender Pickup 2.4 Td4 4x4 (L317) 122 hp Diesel
- Track rod end Land Rover Defender Pickup 2.4 Td4 4x4 (L317) 122 hp Diesel
- Engine mount Land Rover Defender Pickup 2.4 Td4 4x4 (L317) 122 hp Diesel
- Suspension kit Land Rover Defender Pickup 2.4 Td4 4x4 (L317) 122 hp Diesel
- Inner tie rod Land Rover Defender Pickup 2.4 Td4 4x4 (L317) 122 hp Diesel
- ABS sensor Land Rover Defender Pickup 2.4 Td4 4x4 (L317) 122 hp Diesel
- Ball joint DEFENDER 2.4 Td4 4x4 (L317) 122 hp Diesel
- Suspension bushes DEFENDER 2.4 Td4 4x4 (L317) 122 hp Diesel
- Shock absorber dust cover and bump stops DEFENDER 2.4 Td4 4x4 (L317) 122 hp Diesel
- Tyre pressure sensor (TPMS) DEFENDER 2.4 Td4 4x4 (L317) 122 hp Diesel
- Anti-roll bar bushes DEFENDER 2.4 Td4 4x4 (L317) 122 hp Diesel
- Axle bushes DEFENDER 2.4 Td4 4x4 (L317) 122 hp Diesel
- Wheel bolts and wheel nuts DEFENDER 2.4 Td4 4x4 (L317) 122 hp Diesel
- Sway bar DEFENDER 2.4 Td4 4x4 (L317) 122 hp Diesel
- Wheel nuts DEFENDER 2.4 Td4 4x4 (L317) 122 hp Diesel
- Mounting, shock absorbers DEFENDER 2.4 Td4 4x4 (L317) 122 hp Diesel
- Repair kit, support- / steering link DEFENDER 2.4 Td4 4x4 (L317) 122 hp Diesel
- Shock absorber mounting brackets DEFENDER 2.4 Td4 4x4 (L317) 122 hp Diesel
- Towbar / parts
- Wiper and washer system
Wheel hub Land Rover Defender Pickup 2.4 Td4 4x4 (L317) 122 hp Diesel
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
LAND ROVER Defender Pickup (L316) 2.4 Td4 4x4 (L317) year of manufacture 2007, 122 hp vehicle parts products
incl. 20% VAT, excl. delivery costs
- Rim Hole Number: 5
- Number of Teeth: 31
- Diameter [mm]: 158,5
- Supplementary Article / Supplementary Info: without accessories
- Thread Size: M14X1,5
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front axle both sides, Rear Axle both sides
- Number of Teeth: 30
- Width [mm]: 97
- Outer Diameter 2 [mm]: 156
- Diameter [mm]: 79
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle Left, Front Axle Right
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 114
- Number of Teeth: 28
- Diameter [mm]: 139
- Thread Size: M12x1,5
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle Right, Rear Axle Left, Right
- Supplementary Article / Supplementary Info Info 2: with wheel studs
- Fabrication Number: KLT-LR-002P
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Inner Diameter [mm]: 44
- Diameter [mm]: 142
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle
- Rim Hole Number: 5
- Supplementary Article / Supplementary Info Info 2: with wheel studs
- Bolt Hole Circle Ø [mm]: 120
- Number of Teeth: 31
- Diameter [mm]: 158,5
- for wheel bearing diameter [mm]: 50
- Thread Size: M14x1.5
- Number of Teeth on input shaft: 31
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info Info 2: with ABS sensor ring
- Number of Teeth, ABS ring: 88
- Packaging length [cm]: 13,7
- Packaging width [cm]: 13,7
- Packaging height [cm]: 10,9
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle
- Weight [kg]: 2,955
- Packaging length [cm]: 16,0
- Packaging width [cm]: 16,0
- Packaging height [cm]: 11,0
- Condition: New
Over 100 in stock
Wheel Hub 120, Rear Axle, without wheel bearing, with wheel studs (SWAG)
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info Info 2: without wheel bearing, with wheel studs
- Bolt Hole Circle Ø [mm]: 120
- Inner Diameter [mm]: 35
- Width [mm]: 77
- Diameter [mm]: 158,5, 50
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle
- Rim Hole Number: 5
- Distance of mounting bores [mm]: 108
- Diameter [mm]: 136
- Thread Size: M14x1,5
- Number of Teeth on input shaft: 31
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle, Left, Right
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 120
- Weight [kg]: 2,91
- Diameter [mm]: 158,5
- for wheel bearing diameter [mm]: 50
- Number of Teeth on input shaft: 31
- Always compare old and new part (in particular OE No.)
- Condition: New
Over 100 in stock
