Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
-
Exhaust
- Lambda sensor Lancia Dedra 835 1.6i.e. (835AB) 78 hp Petrol
- Turbo Lancia Dedra 835 1.6i.e. (835AB) 78 hp Petrol
- EGR valve Lancia Dedra 835 1.6i.e. (835AB) 78 hp Petrol
- Catalytic converter Lancia Dedra 835 1.6i.e. (835AB) 78 hp Petrol
- Exhaust silencer Lancia Dedra 835 1.6i.e. (835AB) 78 hp Petrol
- Mounting kit, exhaust system Lancia Dedra 835 1.6i.e. (835AB) 78 hp Petrol
- Exhaust pipe Lancia Dedra 835 1.6i.e. (835AB) 78 hp Petrol
- Boost pressure sensor Lancia Dedra 835 1.6i.e. (835AB) 78 hp Petrol
- Exhaust hanger Lancia Dedra 835 1.6i.e. (835AB) 78 hp Petrol
- Exhaust manifold gasket Lancia Dedra 835 1.6i.e. (835AB) 78 hp Petrol
- Exhaust manifold DEDRA 1.6i.e. (835AB) 78 hp Petrol
- Exhaust gasket DEDRA 1.6i.e. (835AB) 78 hp Petrol
- Exhaust clamp DEDRA 1.6i.e. (835AB) 78 hp Petrol
- Middle silencer DEDRA 1.6i.e. (835AB) 78 hp Petrol
- Exhaust tips DEDRA 1.6i.e. (835AB) 78 hp Petrol
- Clamp, exhaust system DEDRA 1.6i.e. (835AB) 78 hp Petrol
- Catalytic converter mounting kit DEDRA 1.6i.e. (835AB) 78 hp Petrol
- Silencer rubber DEDRA 1.6i.e. (835AB) 78 hp Petrol
- Clamp, silencer DEDRA 1.6i.e. (835AB) 78 hp Petrol
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Lambda sensor Lancia Dedra 835 1.6 i.e. 78 hp Petrol

Article №: 3922L0880
Details
-
- Construction Year from: 06/1992
- Exhaust System: before catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 80
- Number of circuits: 3
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£21,49
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 3922L0791
Details
- Oxygen Sensor: Regulating Probe, Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 400
- Number of circuits: 3
- Supplementary Article / Supplementary Info Info 2: without plug
- Voltage [V]: 12
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£30,49
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 3922L0224
Details
-
- TecDoc Engine Number: 835 A1.046
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Number of circuits: 3, 580
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£34,99
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 3922L0003
Details
- Oxygen Sensor: Heated
- Cable Length [mm]: 1090
- Number of circuits: 3
- Number of connectors: 3
- External Thread [mm]: M18 x 1,5
- Connector Shape: round, rectangular
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£37,49
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 3922L0197
Details
-
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Heated
- Cable Length [mm]: 570
- Number of circuits: 3
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£38,99
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 3922L0713
Details
-
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5-6e
- Cable Length [mm]: 420
- Number of circuits: 3
- Number of connectors: 4
- Connector Shape: round
- Line insulation design: with thermal protection flexible insulating tubing
- Condition: New
More
£45,49
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 3922L0548
Details
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 400
- Number of pins: 4
- Number of circuits: 4
- Connector Shape: round
- Plug housing design: Plug sleeve housing
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£56,99
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: ESL-AU-003
Details
-
- Fitting Position: Front
- Exhaust System: before catalytic converter
- Oxygen Sensor: Regulating Probe, Thread pre-greased
- Fitting Position: before catalytic converter
- Fabrication Number: ESL-AU-003
- Condition: New
More
£24,49
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: ESL-CH-009
Details
-
- Fitting Position: Front
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Diagnostic Probe, Thread pre-greased
- Fitting Position: after catalytic converter
- Number of circuits: 4
- Fabrication Number: ESL-CH-009
- Condition: New
More
£28,49
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: ESL-VW-001
Details
-
- Fitting Position: Front
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Diagnostic Probe, Thread pre-greased
- Fitting Position: after catalytic converter
- Fabrication Number: ESL-VW-001
- Condition: New
More
£29,49
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: ESL-RE-001
Details
-
- Fitting Position: Front
- Exhaust System: before catalytic converter
- Oxygen Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased
- Fitting Position: before catalytic converter, after catalytic converter
- Fabrication Number: ESL-RE-001
- Condition: New
More
£30,99
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: ESL-SK-002
Details
-
- Fitting Position: Front
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Diagnostic Probe, Thread pre-greased
- Fitting Position: after catalytic converter
- Fabrication Number: ESL-SK-002
- Condition: New
More
£31,49
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: ESL-SK-000
Details
-
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Diagnostic Probe, Thread pre-greased
- Fitting Position: Front, Rear, before catalytic converter, after catalytic converter
- Transmission Type: 5-Speed Manual Transmission, Manual Transmission, Automatic Transmission, 6-Speed Automatic Transmission
- Fabrication Number: ESL-SK-000
- Condition: New
More
£31,49
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: ESL-AU-007
Details
-
- Fitting Position: Front
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Diagnostic Probe, Thread pre-greased
- Fitting Position: after catalytic converter
- Fabrication Number: ESL-AU-007
- Condition: New
More
£31,99
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: ESL-AU-011
Details
-
- Fitting Position: Front
- Exhaust System: before catalytic converter
- Oxygen Sensor: Regulating Probe, Thread pre-greased
- Fitting Position: before catalytic converter
- Number of circuits: 4
- Fabrication Number: ESL-AU-011
- Condition: New
More
£31,99
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: SKLS-0140081
Details
-
- TecDoc Engine Number: 835 A1.046
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Number of circuits: 3, 580
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£34,99
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: SKLS-0140002
Details
- Oxygen Sensor: Heated
- Cable Length [mm]: 1090
- Number of circuits: 3
- Number of connectors: 3
- External Thread [mm]: M18 x 1,5
- Connector Shape: round, rectangular
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£37,49
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: SKLS-0140309
Details
-
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 570
- Number of circuits: 3
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£38,99
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 3922L0003P
Details
- Oxygen Sensor: Heated
- Cable Length [mm]: 1115
- Number of circuits: 3
- Number of connectors: 3
- External Thread [mm]: M18 x 1,5
- Connector Shape: round, rectangular
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£44,64
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 3922L0548P
Details
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 400
- Number of pins: 4
- Number of circuits: 4
- Connector Shape: round
- Plug housing design: Plug sleeve housing
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£52,74
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: GCC9220101
Details
-
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Overall Length [mm]: 511
- Number of circuits: 3
- Recommended change interval [km]: 100000
- Condition: New
More
£57,74
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: GCC9220167
Details
-
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Heated
- Cable Length [mm]: 570
- Number of circuits: 3
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£65,97
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: GCC9220078
Details
-
- TecDoc Engine Number: 835 A1.046
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Number of circuits: 3, 580
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£81,92
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: GCC9220009
Details
-
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Oxygen Sensor: Heated
- Number of circuits: 3
- Connector/Clamp: Connector may need adjustment
- Condition: New
More
£109,20
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: GCC9220010
Details
-
- Construction Year from: 06/1992
- Fitting Position: before catalytic converter
- Oxygen Sensor: Oxygen Sensor
- Number of pins: 3
- Length [mm]: 135
- Weight [kg]: 0,2
- Condition: New
More
Showing 25 out of 185 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8