Car part
    - Bearings
- Belts, chains, rollers
- Body
- Brakes
- Damping
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- 
                    Suspension
                                            - Suspension arm Cadenza VG 3.3 GDI 294 hp Petrol
- Wheel hub Cadenza VG 3.3 GDI 294 hp Petrol
- Wheel bearing Cadenza VG 3.3 GDI 294 hp Petrol
- Top strut mount and bearing Cadenza VG 3.3 GDI 294 hp Petrol
- Anti-roll bar link Cadenza VG 3.3 GDI 294 hp Petrol
- Track rod end Cadenza VG 3.3 GDI 294 hp Petrol
- Suspension kit Cadenza VG 3.3 GDI 294 hp Petrol
- Inner tie rod Cadenza VG 3.3 GDI 294 hp Petrol
- Ball joint Cadenza VG 3.3 GDI 294 hp Petrol
- Suspension bushes Cadenza VG 3.3 GDI 294 hp Petrol
- Shock absorber dust cover and bump stops CADENZA 3.3 GDI 294 hp Petrol
- Tyre pressure sensor (TPMS) CADENZA 3.3 GDI 294 hp Petrol
- Anti-roll bar bushes CADENZA 3.3 GDI 294 hp Petrol
- Wheel bolts and wheel nuts CADENZA 3.3 GDI 294 hp Petrol
- Steering rack boot CADENZA 3.3 GDI 294 hp Petrol
- Spring cap CADENZA 3.3 GDI 294 hp Petrol
- Camber bolts CADENZA 3.3 GDI 294 hp Petrol
- Wheel nuts CADENZA 3.3 GDI 294 hp Petrol
- Mounting, shock absorbers CADENZA 3.3 GDI 294 hp Petrol
 
- Towbar / parts
- Wiper and washer system
Suspension kit Cadenza VG 3.3 GDI 294 hp Petrol
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
    KIA Cadenza I (VG) 3.3 GDI year of manufacture 2010, 294 hp vehicle parts products
            incl. 20% VAT, free delivery
                
                - Fitting Position: Front Axle
- Supplementary Article / Supplementary Info Info 2: with coupling rod
- Steering: with tie rod ends
- Observe service information
- Supplementary Info: OE Turbo NEW
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
                
                - Material: Aluminium
- Weight [kg]: 10,7
- Supplementary Info: BREMBO CO-CAST DISCS LINE
- Condition: New
Over 100 in stock
 
                                
                
                
                incl. 20% VAT, free delivery
                
                - Fitting Position: Front Axle
- Condition: New
Over 100 in stock
 
                                
                
                
                incl. 20% VAT, free delivery
                
                - Packing Type: Box
- Packaging length [cm]: 61,2
- Packaging width [cm]: 34,4
- Packaging height [cm]: 8,8
- Condition: New
Over 100 in stock
 
                                
                
                
                incl. 20% VAT, free delivery
                
                - Fitting Position: Rear Axle Right, Rear Axle Left, Rear
- Rod/Strut: Pull Rod, Camber Link
- Supplementary Article / Supplementary Info: with accessories
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
                
                - Fitting Position: Front axle both sides
- Weight [kg]: 11
- Supplementary Article / Supplementary Info Info 2: with coupling rod
- Steering: with tie rod ends
- Supplementary Article / Supplementary Info: with fastening/mounting material
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
                
                - Material: Aluminium
- Control/Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left, Front Axle Right
- Supplementary Article / Supplementary Info Info 2: with coupling rod
- for OE number: 31 12 6 770 849 S2
- Observe service information
- Condition: New
Over 100 in stock
 
                                
                
                
                incl. 20% VAT, free delivery
                
                - Fitting Position: Front Axle
- Weight [kg]: 12,6
- Always compare old and new part (in particular OE No.)
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
                
                - Fitting Position: Front axle both sides
- Weight [kg]: 11
- Supplementary Article / Supplementary Info Info 2: with coupling rod
- Supplementary Article / Supplementary Info: with fastening/mounting material
- Condition: New
Over 100 in stock
