Car part
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Ignition and preheating
- Interior
- Lighting
- Propshafts and differentials
- Repair kits
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Cv joint Jeep Cherokee XJ 4.0 4x4 197 hp Petrol
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
JEEP CHEROKEE (XJ) 4.0 4x4 year of manufacture 1990, 197 hp vehicle parts products
incl. 20% VAT, excl. delivery costs
- Fitting Position: Wheel Side
- External Toothing wheel side: 27
- Internal Toothing wheel side: 32
- Number of Teeth, ABS ring: 54
- Sealing Ring Diameter [mm]: 60
- Joint Type: CV Joint
- Specification: Groove type: Inner
- Diameter [mm]: 84,8
- Diameter 1 [mm]: 60,5
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle Right, Front Axle Left
- External Toothing wheel side: 27
- Internal Toothing wheel side: 32
- Sealing Ring Diameter [mm]: 65
- Number of Teeth: 48
- Supplementary Article / Supplementary Info: with retaining ring rear side
- Fabrication Number: NPZ-CH-009
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: A1
- Length [mm]: 180
- External Toothing wheel side: 27
- Internal Toothing wheel side: 32
- Number of Teeth, ABS ring: 54
- Sealing Ring Diameter [mm]: 60
- Thread Size: M24X1,5
- Supplementary Article / Supplementary Info: Lock ring, inside
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Wheel Side
- External Toothing wheel side: 27
- Internal Toothing wheel side: 32
- Number of Teeth, ABS ring: 54
- Joint Type: CV Joint
- Diameter [mm]: 85
- Fabrication Number: NPZ-CH-008
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Length [mm]: 70
- External Toothing wheel side: 27
- Sealing Ring Diameter [mm]: 65,4
- Specification: BELL PIN LENGTH - 10
- External Toothing differential side: 32
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle
- Length [mm]: 32
- Diameter [mm]: 100
- Number of Teeth on input shaft: 25
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Length [mm]: 92
- Diameter [mm]: 27
- Fabrication Number: NKW-CH-006
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Wheel Side
- Length [mm]: 102
- External Toothing wheel side: 27
- Internal Toothing wheel side: 32
- Overall Length [mm]: 180
- Sealing Ring Diameter [mm]: 69,5
- Specification: Groove type: INNER
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Length [mm]: 30
- Diameter [mm]: 100
- Number of Teeth on input shaft: 25
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Length [mm]: 178
- External Toothing wheel side: 27
- Internal Toothing wheel side: 32
- Number of Teeth, ABS ring: 48
- Sealing Ring Diameter [mm]: 65,4
- Thread Size: M24X1,5
- Supplementary Article / Supplementary Info: Lock ring, inside
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Length [mm]: 148, 147,5
- External Toothing wheel side: 27
- Internal Toothing wheel side: 26
- Sealing Ring Diameter [mm]: 59
- Thread Size: M24X1,5
- Technical Information Number: Middle groove
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle, Wheel Side
- External Toothing wheel side: 29
- Internal Toothing wheel side: 36
- Sealing Ring Diameter [mm]: 70
- Joint Type: CV Joint
- Diameter [mm]: 90
- Quantity: 1
- Packaging length [cm]: 20,0
- Packaging width [cm]: 10,5
- Packaging height [cm]: 10,5
- Condition: New
Over 100 in stock
