Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
-
Electrics
- Headlights Isuzu D-MAX 8DH 2.5 DiTD (TFR86_) 136 hp Diesel
- Alternator Isuzu D-MAX 8DH 2.5 DiTD (TFR86_) 136 hp Diesel
- Battery Isuzu D-MAX 8DH 2.5 DiTD (TFR86_) 136 hp Diesel
- Rear lights Isuzu D-MAX 8DH 2.5 DiTD (TFR86_) 136 hp Diesel
- Starter motor Isuzu D-MAX 8DH 2.5 DiTD (TFR86_) 136 hp Diesel
- Mass air flow sensor (MAF) Isuzu D-MAX 8DH 2.5 DiTD (TFR86_) 136 hp Diesel
- ABS sensor Isuzu D-MAX 8DH 2.5 DiTD (TFR86_) 136 hp Diesel
- Indicator stalk Isuzu D-MAX 8DH 2.5 DiTD (TFR86_) 136 hp Diesel
- Headlight bulb Isuzu D-MAX 8DH 2.5 DiTD (TFR86_) 136 hp Diesel
- Fog light bulb Isuzu D-MAX 8DH 2.5 DiTD (TFR86_) 136 hp Diesel
- Spotlight bulb D-MAX 2.5 DiTD (TFR86_) 136 hp Diesel
- Camshaft sensor D-MAX 2.5 DiTD (TFR86_) 136 hp Diesel
- Heater resistor D-MAX 2.5 DiTD (TFR86_) 136 hp Diesel
- Crankshaft sensor D-MAX 2.5 DiTD (TFR86_) 136 hp Diesel
- Fog lights D-MAX 2.5 DiTD (TFR86_) 136 hp Diesel
- Window switch D-MAX 2.5 DiTD (TFR86_) 136 hp Diesel
- Windscreen washer pump D-MAX 2.5 DiTD (TFR86_) 136 hp Diesel
- Alternator parts D-MAX 2.5 DiTD (TFR86_) 136 hp Diesel
- Ignition switch D-MAX 2.5 DiTD (TFR86_) 136 hp Diesel
- Towbar electric kit D-MAX 2.5 DiTD (TFR86_) 136 hp Diesel
- Horn D-MAX 2.5 DiTD (TFR86_) 136 hp Diesel
- Reverse light switch D-MAX 2.5 DiTD (TFR86_) 136 hp Diesel
- Fuse D-MAX 2.5 DiTD (TFR86_) 136 hp Diesel
- Hazard switch D-MAX 2.5 DiTD (TFR86_) 136 hp Diesel
- Starter solenoid D-MAX 2.5 DiTD (TFR86_) 136 hp Diesel
- Combination rearlight bulb D-MAX 2.5 DiTD (TFR86_) 136 hp Diesel
- Engine control unit (ECU) D-MAX 2.5 DiTD (TFR86_) 136 hp Diesel
- Fuse box / -holder D-MAX 2.5 DiTD (TFR86_) 136 hp Diesel
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Alternator Isuzu D-MAX 8DH 2.5 DiTD (TFR86_) 136 hp Diesel
Article №: 4G0525
Details
- Alternator Charging Current [A]: 90
- Voltage [V]: 12
- Rated Voltage [V]: 14
- Belt Pulley Ø [mm]: 59
- Pulleys: with belt pulley
- Number of grooves: 7
- Plug Type ID: B+(M8),S,L, S,L
- Vehicle Main Current: for vehicles with 12V main current
- Rotation Direction: Clockwise rotation
- Alternator Type: excl. vacuum pump
- Fastening Type: 3-point attachment
- Clamp: B+ (M8)
- Bore Diameter 1 [mm]: 10
- Number of mounting bores: 3
- Number of threaded holes: 1
- Thread Size: M8
- Distance from belt pulley to alternator [mm]: 41
- Condition: New
More
£133,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 4G1016
Details
- Alternator Charging Current [A]: 80
- Voltage [V]: 12
- Rated Voltage [V]: 14
- Belt Pulley Ø [mm]: 62
- Pulleys: with belt pulley
- Number of grooves: 7
- Vehicle Main Current: for vehicles with 12V main current
- Alternator Type: excl. vacuum pump
- Fastening Type: Single pivoted lever
- Clamp: B+ (M8),L-D
- Bore Diameter 1 [mm]: 10
- Number of threaded holes: 1
- Distance from belt pulley to alternator [mm]: 43
- Condition: New
More
Article №: 4G1422
Details
- Alternator Charging Current [A]: 90
- Voltage [V]: 14
- Rated Voltage [V]: 14
- Belt Pulley Ø [mm]: 62
- Pulleys: with multi-belt pulley
- Number of grooves: 7
- Vehicle Main Current: for vehicles with 12V main current
- Rotation Direction: Clockwise rotation
- Alternator Type: excl. vacuum pump
- Fastening Type: 3-point attachment
- Clamp: M8 B+
- Bore Diameter 1 [mm]: 10
- Number of mounting bores: 3
- Number of threaded holes: 1
- Thread Size: M8
- Distance from belt pulley to alternator [mm]: 43
- Condition: New
More
Article №: 4G0525R
Details
- Alternator Charging Current [A]: 90
- Voltage [V]: 12
- Rated Voltage [V]: 14
- Belt Pulley Ø [mm]: 59
- Pulleys: with belt pulley
- Number of grooves: 7
- Plug Type ID: B+(M8),S,L, S,L
- Vehicle Main Current: for vehicles with 12V main current
- Rotation Direction: Clockwise rotation
- Alternator Type: excl. vacuum pump
- Fastening Type: 3-point attachment
- Clamp: B+ (M8)
- Bore Diameter 1 [mm]: 10
- Number of mounting bores: 3
- Number of threaded holes: 1
- Thread Size: M8
- Distance from belt pulley to alternator [mm]: 41
- Condition: New
More
£77,49
incl. 20% VAT, excl. delivery costs
In stock
Core exchange £31,76 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: SKGN-0320747
Details
- Alternator Charging Current [A]: 90
- Voltage [V]: 12
- Rated Voltage [V]: 14
- Belt Pulley Ø [mm]: 59
- Pulleys: with belt pulley
- Number of grooves: 7
- Plug Type ID: B+(M8),S,L, S,L
- Vehicle Main Current: for vehicles with 12V main current
- Rotation Direction: Clockwise rotation
- Alternator Type: excl. vacuum pump
- Fastening Type: 3-point attachment
- Clamp: B+ (M8)
- Bore Diameter 1 [mm]: 10
- Number of mounting bores: 3
- Number of threaded holes: 1
- Thread Size: M8
- Distance from belt pulley to alternator [mm]: 41
- Condition: New
More
£94,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8EL 015 630-551
Details
- Alternator Charging Current [A]: 80
- Voltage [V]: 14
- Belt Pulley Ø [mm]: 63
- Pulleys: with V-ribbed belt pulley
- Number of grooves: 7
- Used part return not required
- New part without deposit
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£126,20
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: A2148S
Details
- Alternator Charging Current [A]: 90
- Voltage [V]: 12
- Pulleys: with belt pulley
- Manufacturer Restriction: HITACHI
- Quality: STANDARD LINE
- Version: LR190-763
- New part without deposit
- Condition: New
More
Article №: 135.568.090.080
Details
- Alternator Charging Current [A]: 90
- Voltage [V]: 12
- Belt Pulley Ø [mm]: 65,0
- Number of grooves: 7
- Clamp: B+ (M8)
- New Part
- Quality: +Line Original
- Number of mounting bores: 3
- Mounting Angle [degrees]: +15
- Condition: New
More
Article №: 135.573.080.051
Details
- Alternator Charging Current [A]: 80
- Voltage [V]: 12
- Belt Pulley Ø [mm]: 62,0
- Number of grooves: 7
- Clamp: B+ (M8)
- Quality: +Line Original
- Number of mounting bores: 3
- Mounting Angle [degrees]: +15
- Condition: New
More
Article №: SKGN-0321238
Details
- Alternator Charging Current [A]: 80
- Voltage [V]: 12
- Rated Voltage [V]: 14
- Belt Pulley Ø [mm]: 62
- Pulleys: with belt pulley
- Number of grooves: 7
- Vehicle Main Current: for vehicles with 12V main current
- Rotation Direction: Clockwise rotation
- Alternator Type: excl. vacuum pump
- Fastening Type: Single pivoted lever
- Clamp: B+ (M8),L-D
- Bore Diameter 1 [mm]: 10
- Number of threaded holes: 1
- Distance from belt pulley to alternator [mm]: 43
- Condition: New
More
Article №: A6152
Details
- Alternator Charging Current [A]: 80
- Voltage [V]: 12
- Pulleys: with belt pulley
- Manufacturer Restriction: DENSO
- Quality: STANDARD LINE
- Version: 1042109031
- New part without deposit
- Condition: New
More
Article №: RIV610167
Details
- Alternator Charging Current [A]: 90
- Voltage [V]: 12
- Belt Pulley Ø [mm]: 65
- Pulleys: with V-ribbed belt pulley
- Number of grooves: 7
- Condition: New
More
£199,49
incl. 20% VAT, free delivery
Free delivery
In stock
Core exchange £7,70 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: SKGN-03221645
Details
- Alternator Charging Current [A]: 90
- Voltage [V]: 14
- Rated Voltage [V]: 14
- Belt Pulley Ø [mm]: 62
- Pulleys: with multi-belt pulley
- Number of grooves: 7
- Vehicle Main Current: for vehicles with 12V main current
- Rotation Direction: Clockwise rotation
- Alternator Type: excl. vacuum pump
- Fastening Type: 3-point attachment
- Clamp: M8 B+
- Bore Diameter 1 [mm]: 10
- Number of mounting bores: 3
- Number of threaded holes: 1
- Thread Size: M8
- Distance from belt pulley to alternator [mm]: 43
- Condition: New
More
Article №: STX110167R
Details
- Alternator Charging Current [A]: 90
- Voltage [V]: 14
- Belt Pulley Ø [mm]: 65
- Number of ribs: 7
- Condition: New
More
£208,99
incl. 20% VAT, free delivery
Free delivery
In stock
Core exchange £23,12 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: DAN1487
Details
- Alternator Charging Current [A]: 90
- Voltage [V]: 14
- Belt Pulley Ø [mm]: 63
- Number of ribs: 7
- Vehicle Main Current: for vehicles with 12V main current
- Quality: OE
- New part without deposit
- Gross Weight [g]: 4820
- Condition: New
More
Article №: WAL00675
Details
- Alternator Charging Current [A]: 80
- Voltage [V]: 14
- Belt Pulley Ø [mm]: 62
- Pulleys: with multi-belt pulley
- Number of ribs: 7
- Plug Type ID: 0209
- Vehicle Main Current: for vehicles with 12V main current
- Clamp: M8 B+;L Plug 283
- Bore Diameter 1 [mm]: 10
- Net weight [kg]: 4,4
- Condition: New
More
Article №: AEG1408
Details
- Alternator Charging Current [A]: 90
- Voltage [V]: 12
- Pulleys: with multi-belt pulley
- Number of ribs: 7
- Plug Type ID: B+, Dummy, L
- Number of mounting bores: 3
- Plug Type: Round Plug
- Condition: New
More
£261,49
incl. 20% VAT, free delivery
Free delivery
In stock
Core exchange £31,76 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: WAL01549
Details
- Alternator Charging Current [A]: 70
- Voltage [V]: 14
- Belt Pulley Ø [mm]: 62
- Pulleys: with multi-belt pulley
- Number of ribs: 7
- Plug Type ID: 0209
- Vehicle Main Current: for vehicles with 12V main current
- Clamp: M8 B+;L Plug 283
- Bore Diameter 1 [mm]: 10
- Net weight [kg]: 4,45
- Condition: New
More
Article №: 211029A
Details
- Alternator Charging Current [A]: 80
- Voltage [V]: 12
- Belt Pulley Ø [mm]: 62
- Pulleys: with belt pulley
- Number of grooves: 7
- Vehicle Main Current: for vehicles with 12V main current
- Clamp: L Plug 283, M8 B+
- Bore Diameter 1 [mm]: 10
- Condition: New
More
Article №: 135.568.090.088
Details
- Alternator Charging Current [A]: 90
- Voltage [V]: 12
- Belt Pulley Ø [mm]: 65,0
- Number of grooves: 7
- Clamp: B+ (M8)
- Quality: RNL-Standard
- Number of mounting bores: 3
- Condition: New
More
£101,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 135.568.090.265
Details
- Alternator Charging Current [A]: 90
- Voltage [V]: 12
- Belt Pulley Ø [mm]: 65,0
- Number of grooves: 7
- Clamp: B+ (M8)
- Quality: Japan Reman
- Number of mounting bores: 3
- Mounting Angle [degrees]: +15
- Condition: New
More
£110,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 135.573.080.058
Details
- Alternator Charging Current [A]: 80
- Voltage [V]: 12
- Belt Pulley Ø [mm]: 62,0
- Number of grooves: 7
- Clamp: B+ (M8)
- Quality: RNL-Standard
- Number of mounting bores: 3
- Condition: New
More
£119,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 3111228
Details
- Alternator Charging Current [A]: 90
- Voltage [V]: 12
- Number of ribs: 7
- Vehicle Main Current: for vehicles with 12V main current
- Vehicle type: D-Max, Rodeo
- Quality: Standard Neuteil
- Condition: New
More
£133,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 3111230
Details
- Alternator Charging Current [A]: 90
- Voltage [V]: 12
- Number of ribs: 7
- Vehicle Main Current: for vehicles with 12V main current
- Vehicle type: D-Max, Rodeo
- Quality: Japan Reman
- Condition: New
More
Article №: 135.573.080.050
Details
- Alternator Charging Current [A]: 80
- Voltage [V]: 12
- Belt Pulley Ø [mm]: 62,0
- Number of grooves: 7
- Clamp: B+ (M8)
- Quality: +Line Original
- Number of mounting bores: 3
- Mounting Angle [degrees]: +15
- Condition: New
More
Showing 25 out of 42 products
