Car part
    - Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- 
                    Brakes
                                            - Brake discs HYUNDAI Tiburon Coupe 2.0 CVVT 143 hp Petrol
- Brake pads HYUNDAI Tiburon Coupe 2.0 CVVT 143 hp Petrol
- Brake caliper HYUNDAI Tiburon Coupe 2.0 CVVT 143 hp Petrol
- ABS sensor HYUNDAI Tiburon Coupe 2.0 CVVT 143 hp Petrol
- Brake caliper repair kit HYUNDAI Tiburon Coupe 2.0 CVVT 143 hp Petrol
- Handbrake HYUNDAI Tiburon Coupe 2.0 CVVT 143 hp Petrol
- Brake caliper carrier HYUNDAI Tiburon Coupe 2.0 CVVT 143 hp Petrol
- Brake hose HYUNDAI Tiburon Coupe 2.0 CVVT 143 hp Petrol
- Master cylinder HYUNDAI Tiburon Coupe 2.0 CVVT 143 hp Petrol
- Handbrake cable HYUNDAI Tiburon Coupe 2.0 CVVT 143 hp Petrol
- Guide sleeve kit, brake caliper TIBURON 2.0 CVVT 143 hp Petrol
- Brake fluid TIBURON 2.0 CVVT 143 hp Petrol
- Brake pad fitting kit TIBURON 2.0 CVVT 143 hp Petrol
- Accessory kit, brake shoes TIBURON 2.0 CVVT 143 hp Petrol
- Brake pads and discs TIBURON 2.0 CVVT 143 hp Petrol
- Brake light switch TIBURON 2.0 CVVT 143 hp Petrol
- Abs ring TIBURON 2.0 CVVT 143 hp Petrol
- Brake caliper piston TIBURON 2.0 CVVT 143 hp Petrol
- Brake disc bolts TIBURON 2.0 CVVT 143 hp Petrol
- High-performance brake pads TIBURON 2.0 CVVT 143 hp Petrol
 
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Wiper and washer system
Brake discs HYUNDAI Tiburon Coupe 2.0 CVVT 143 hp Petrol
 
                Article №: 82B0276
            Details
                    - Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5/10
- Wheel Bolt Bore Diameter [mm]: 12,5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 76
- Height [mm]: 45,3
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
    £26,49
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: 82B0382
            Details
                    - Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Number of Holes: 5/7
- Wheel Bolt Bore Diameter [mm]: 12,5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 26
- Centering Diameter [mm]: 69
- Height [mm]: 47,4
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- usable for vehicles to construction year: 2016/11
- Drilled: no
- Condition: New
More
    £31,99
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: 82B0393
            Details
                    - Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Number of Holes: 5/7
- Wheel Bolt Bore Diameter [mm]: 12,8
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 26
- Centering Diameter [mm]: 69,1
- Height [mm]: 47,3
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- usable for vehicles to construction year: 2016/11
- Drilled: no
- Condition: New
More
    £33,49
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: 231-03-070-2
            Details
                    - Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 26
- Centering Diameter [mm]: 69
- Height [mm]: 47,4
- Required quantity: 2
- Test Mark: ECE R90
- Replace in pairs only
- Assy./disassy. by qualified personnel required!
- Condition: New
More
    £24,99
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: SKBD-0020281
            Details
                    - Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5/10
- Wheel Bolt Bore Diameter [mm]: 12,5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 76
- Height [mm]: 45,3
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
    £26,49
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: BG3862
            Details
                    - 
            - Fitting Position: Rear Axle
- for model code: Coupe
 
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 76
- Height [mm]: 45,3
- Surface: Oiled
- Test Mark: E1 90R-02C0100/0944
- Drilled: no
- Condition: New
More
    £26,99
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: 8DD 355 114-531
            Details
                    - Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Hole Arrangement/Number: 05/10
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 76
- Height [mm]: 45,4
- Weight [kg]: 4,2
- Technical Information Number: 54667
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
    £27,49
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: 17641
            Details
                    - 
            - Fitting Position: Rear Axle
- Vehicle type: Tiburon
 
- Diameter [mm]: 258
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 76
- Hub Diameter [mm]: 167
- Height [mm]: 45
- Weight [kg]: 4,12
- Surface: Coated
- Drilled: no
- Condition: New
More
    £27,99
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: SKBD-0020387
            Details
                    - Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Number of Holes: 5/7
- Wheel Bolt Bore Diameter [mm]: 12,5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 26
- Centering Diameter [mm]: 69
- Height [mm]: 47,4
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- usable for vehicles to construction year: 2016/11
- Drilled: no
- Condition: New
More
    £31,99
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: B130911
            Details
                    - Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Height [mm]: 45,3
- Condition: New
More
    £33,49
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: SKBD-0022041
            Details
                    - Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Number of Holes: 5/7
- Wheel Bolt Bore Diameter [mm]: 12,8
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 26
- Centering Diameter [mm]: 69,1
- Height [mm]: 47,3
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- usable for vehicles to construction year: 2016/11
- Drilled: no
- Condition: New
More
    £33,49
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: 19-2381
            Details
                    - Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114, 114,3
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,5
- Centering Diameter [mm]: 76,1
- Height [mm]: 45,3
- Surface: Painted
- Colour: black
- Test Mark: E190R02 02C0190/0240
- Drilled: no
- Condition: New
More
    £34,49
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: 231-03-070
            Details
                    - Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 26
- Centering Diameter [mm]: 69
- Height [mm]: 47,4
- Required quantity: 2
- Test Mark: ECE R90
- Replace in pairs only
- Assy./disassy. by qualified personnel required!
- Condition: New
More
    £34,99
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: H2017P
            Details
                    - Fitting Position: Rear Axle
- Diameter [mm]: 258
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 75,6
- Height [mm]: 45,9
- Drilled: no
- Condition: New
More
    £34,99
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: 24011004001-PCS-MS
            Details
                    - Fitting Position: Rear Axle
- Diameter [mm]: 284
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 144
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,4
- Centering Diameter [mm]: 76
- Inner Diameter [mm]: 155
- Height [mm]: 31,9
- Surface: Coated
- Machining: High-carbon
- Required quantity: 2
- Bore Diameter [mm]: 12,5
- Net weight [kg]: 4,34
- Gross Weight [kg]: 4,50
- Drilled: no
- Condition: New
More
    £34,99
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: 6054613
            Details
                    - Fitting Position: Rear Axle
- Diameter [mm]: 258,0
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10,0
- Production Number: K6054613
- Condition: New
More
    £36,49
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: 61H04C
            Details
                    - Fitting Position: Rear Axle
- Diameter [mm]: 257,8
- Brake Disc Type: solid
- Number of bores: 5
- Bolt Hole Circle Ø [mm]: 76
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,5
- Height [mm]: 45,5
- Surface: Painted
- Tightening Torque [Nm]: 100
- Test Mark: ECE R90 APPROVED
- for OE number: 584112C000
- Drilled: no
- Condition: New
More
    £37,99
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: 82B0382P
            Details
                    - Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Number of Holes: 5/7
- Wheel Bolt Bore Diameter [mm]: 12,5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 26
- Centering Diameter [mm]: 69
- Height [mm]: 47,4
- Surface: Coated
- Material: Grey Cast Iron
- Supplementary Article / Supplementary Info Info 2: without wheel studs, without wheel hub
- usable for vehicles to construction year: 2016/11
- Drilled: no
- Condition: New
More
    £39,89
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: 61-0H-004C
            Details
                    - Fitting Position: Rear Axle
- Diameter [mm]: 257,8
- Brake Disc Type: solid
- Number of bores: 5
- Bolt Hole Circle Ø [mm]: 76
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,5
- Height [mm]: 45,5
- Surface: Painted
- Tightening Torque [Nm]: 100
- Test Mark: ECE R90 APPROVED
- for OE number: 584112C000
- Drilled: no
- Condition: New
More
    £39,99
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: 19-0939
            Details
                    - Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114
- Brake Disc Thickness [mm]: 26
- Minimum thickness [mm]: 24,4
- Centering Diameter [mm]: 69
- Height [mm]: 47,4
- Surface: Painted
- Test Mark: E190R 0202C0176/0048
- Drilled: no
- Condition: New
More
    £41,49
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: 19-3354
            Details
                    - Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: internally vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114
- Brake Disc Thickness [mm]: 26
- Minimum thickness [mm]: 24,4
- Centering Diameter [mm]: 69
- Height [mm]: 47,3
- Surface: Painted, Coated
- Technical Information Number: 98200 1339 0 1 PRO
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Packaging length [cm]: 33
- Packaging width [cm]: 31,5
- Packaging height [cm]: 12
- Drilled: no
- Condition: New
More
    £45,99
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: B130434
            Details
                    - Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 26
- Minimum thickness [mm]: 24,4
- Centering Diameter [mm]: 69
- Inner Diameter [mm]: 141,5
- Height [mm]: 47,4
- Bore Diameter [mm]: 12,5
- Drilled: no
- Condition: New
More
    £48,49
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                                                
         
                Article №: GCH20337
            Details
                    - Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Number of Holes: 5/7
- Wheel Bolt Bore Diameter [mm]: 12,5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 26
- Centering Diameter [mm]: 69
- Height [mm]: 47,4
- Surface: Coated
- Material: Grey Cast Iron
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- usable for vehicles to construction year: 2016/11
- Drilled: no
- Condition: New
More
    £73,61
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                                                
         
                Article №: GCH20295
            Details
                    - Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5/10
- Wheel Bolt Bore Diameter [mm]: 12,5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 76
- Height [mm]: 45,3
- Surface: Coated
- Material: Grey Cast Iron
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Drilled: no
- Condition: New
More
    £74,76
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                                                
         
                Article №: GCH20365
            Details
                    - Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Number of Holes: 5/7
- Wheel Bolt Bore Diameter [mm]: 12,8
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 26
- Centering Diameter [mm]: 69,1
- Height [mm]: 47,4
- Surface: Coated
- Material: Grey Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- usable for vehicles to construction year: 2016/11
- Drilled: no
- Condition: New
More
    £114,56
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
        Showing 25 out of 167 products
            
            Show the next items
            
        
    
    
    
- 1
- 2
- 3
- 4
- 5
- 6
- 7
 
                                     
                                     
                                     
                                     
                                     
                                    