HYUNDAI i10 III (AC3, AI3) - Typ: 1.2 CNG
- Manuf. year (from - to): 09.2019 - ...
- Car body type: Hatchback
- Type of drive: Front-Wheel Drive
- Cylinder capacity (cc): 1197
- Cylinders: 4
- Engine type: Petrol Engine
- Power: 69
- ABS: without ABS
- Valves per combustion chamber: 4
- Fuel type: Petrol/Compressed Natural Gas (CNG)
- Fuel handling: Intake Manifold Injection/ Carburettor
- Catalyst: with three-way catalytic converter
PARTS HYUNDAI i10 III Hatchback (AC3, AI3) 1.2 CNG 69 hp Petrol Engine G4LF 2019 - ...
-
Bestsellers
-
Air conditioning
-
Bearings
-
Belts, chains, rollers
-
Body
-
Brakes
-
Clutch
-
Damping
-
Drive shaft and cv joint
-
Electrics
-
Engine
-
Exhaust
-
Filters
-
Fuel supply system
-
Gaskets and sealing rings
-
Heating and ventilation
-
Ignition and preheating
-
Interior
-
Oils and fluids
-
Pipes and hoses
-
Repair kits
-
Sensors, relays, control units
-
Steering
-
Suspension
-
Towbar / parts
-
Wiper and washer system
Parts HYUNDAI i10 III (AC3, AI3) 1.2 CNG 69 hp
-
Brake discs
-
Brake pads
-
Oil filter
-
Air filter
-
Wiper blades
-
Wheel hub
-
Cabin filter
-
Wheel bearing
-
Fuel filter
-
Anti-roll bar link
-
Top strut mount and bearing
-
Serpentine belt
Air conditioning
Top
A-Z
-
Cabin filter
Bearings
Top
A-Z
-
Wheel bearing
-
Clutch release bearing
Show more categories
Belts, chains, rollers
Top
A-Z
-
Serpentine belt
Body
Top
A-Z
-
Headlights
-
Door trim
-
Daytime running lights
-
Licence plate holder / bracket
Brakes
Top
A-Z
-
Brake discs
-
Brake pads
-
Brake hose
-
Brake pad fitting kit
-
Brake drum
-
Brake caliper repair kit
-
Guide sleeve kit, brake caliper
-
Brake pads and discs
-
Drum brake
Clutch
Top
A-Z
-
Clutch release bearing
Damping
Top
A-Z
-
Shock absorber
-
Top strut mount and bearing
-
Suspension kit, coil springs
-
Camber bolts
Drive shaft and cv joint
Top
A-Z
-
Drive shaft oil seal
Electrics
Top
A-Z
-
Alternator parts
-
Tyre pressure sensor (TPMS)
Engine
Top
A-Z
-
Serpentine belt
-
Oil filter
-
Air filter
-
Fuel filter
-
Ignition leads
-
Oil drain plug gasket
-
Sump plug
-
Injector seals
-
Hose, valve cover breather
Exhaust
Top
A-Z
-
Lambda sensor
Filters
Top
A-Z
-
Oil filter
-
Air filter
-
Cabin filter
-
Fuel filter
Fuel supply system
Top
A-Z
-
Fuel filter
-
Injector seals
Gaskets and sealing rings
Top
A-Z
-
Oil drain plug gasket
-
Injector seals
-
Door seal
-
Drive shaft oil seal
Heating and ventilation
Top
A-Z
-
Cabin filter
Ignition and preheating
Top
A-Z
-
Ignition leads
Interior
Top
A-Z
-
Boot
-
Floor mats
Show more categories
Oils and fluids
Top
A-Z
-
Screenwash
Pipes and hoses
Top
A-Z
-
Hose, valve cover breather
Repair kits
Top
A-Z
-
Brake caliper repair kit
-
Guide sleeve kit, brake caliper
-
Alternator parts
-
Suspension kit
Sensors, relays, control units
Top
A-Z
-
Tyre pressure sensor (TPMS)
Steering
Top
A-Z
-
Track rod end
-
Inner tie rod
-
Ball joint
-
Tie rod
Suspension
Top
A-Z
-
Wheel bearing
-
Anti-roll bar link
-
Ball joint
-
Wheel hub
-
Top strut mount and bearing
-
Suspension bushes
-
Wheel bolts and wheel nuts
-
Inner tie rod
-
Axle bushes
-
Suspension kit
-
Tyre pressure sensor (TPMS)
-
Camber bolts
-
Wheel nuts
Towbar / parts
Top
A-Z
-
Towbar
Wiper and washer system
Top
A-Z
-
Wiper blades
-
Screenwash
Top Car parts maker
Automotive products for HYUNDAI i10 III (AC3, AI3) 1.2 CNG 2019 year, 69 hp
-9%
compared to RRP:
£ 4,10
incl. 20% VAT, excl. delivery costs
-
- Production date from: 20000101
- Production date to: 20200703
- Length [mm]: 48
- Thread Size: M12x1,5
- Packaging length [cm]: 4,9
- Packaging width [cm]: 1,9
- Packaging height [cm]: 1,9
- Condition: New
Over 100 in stock
-8%
compared to RRP:
£ 7,58
incl. 20% VAT, excl. delivery costs
-
- Production date from: 20190727
- Production date to: 20200523
- Fitting Position: Rear Axle, Rear
- Length [mm]: 79
- Quantity: 2
- Packaging length [cm]: 9,1
- Packaging width [cm]: 2,4
- Packaging height [cm]: 2,4
- Condition: New
Over 100 in stock
-58%
compared to RRP:
£ 12,40
incl. 20% VAT, excl. delivery costs
- Chemical Properties: Permanently elastic, not solvent-bearing, UV resistant
- Packing Type: Tube
- Capacity [ml]: 70
- Material: Silicone
- Temperature range from [°C]: -60
- Temperature range to [°C]: 315
- Colour: grey
- Fitting Position: Cylinder Head
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
-
- Production date from: 20000101
- Production date to: 20200522
- Weight [kg]: 0,4
- Packaging length [cm]: 21,0
- Packaging width [cm]: 8,0
- Packaging height [cm]: 3,5
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Spanner Size: 21
- Wheel Fastening: Conical Seat F
- Fitting Position: Front Axle, Rear Axle
- Thickness [mm]: 29,3
- Quality/ Grade: 8
- Surface: Chromed
- Bolt Head-/Nut Design: Male Hex
- Weight [kg]: 0,06
- Observe service information
- Rims: for light alloy rims, for steel rims
- Material: Steel
- Bolt/Nut Version: Cap Nut
- Diameter [mm]: 24
- Internal Thread Size: M12 x 1,5
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
-
- Production date from: 20140101
- Production date to: 20200523
- Fitting Position: Left
- Thickness [mm]: 13
- Inner Diameter [mm]: 39
- Packaging length [cm]: 6,7
- Packaging width [cm]: 6,7
- Packaging height [cm]: 1,3
- Diameter [mm]: 61
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Material: Aluminium
- Inner Diameter [mm]: 14,4
- Thickness [mm]: 2
- Weight [kg]: 0,001
- Colour: silver
- Diameter [mm]: 22
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Thickness [mm]: 9
- Inner Diameter [mm]: 35
- Packaging length [cm]: 5,6
- Packaging width [cm]: 5,6
- Packaging height [cm]: 1,5
- Diameter [mm]: 56
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle
- Weight [kg]: 0,382
- Packaging length [cm]: 9,5
- Packaging width [cm]: 9,5
- Packaging height [cm]: 3,5
- Condition: New
Over 100 in stock
-15%
compared to RRP:
£ 4,96
incl. 20% VAT, excl. delivery costs
- Height [mm]: 11
- Inner Diameter [mm]: 15
- Diameter [mm]: 35
- Bearing Type: Ball Bearing
- DIN standards (Bearings): DIN 625 (groove ball bearings)
- Packaging length [cm]: 3,5
- Packaging width [cm]: 3,5
- Packaging height [cm]: 1,1
- Condition: New
Over 100 in stock
-47%
compared to RRP:
£ 35,39
incl. 20% VAT, excl. delivery costs
- Product line: Platinum CT
- Thread Length [mm]: 26,5
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, with gasket seat, Iridium Middle Electrode
- Thread Size: M14x1.25
- Connector type: SAE
- Required quantity: 4
- Packing Type: Box
- Quality/ Grade: Pt GE
- Technical Information Number: RER8WYPB
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8,85
- Packaging width [cm]: 2,6
- Packaging height [cm]: 2,35
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 7,5
- Projection [mm]: 1,5
- Condition: New
Over 100 in stock
-21%
compared to RRP:
£ 4,15
incl. 20% VAT, excl. delivery costs
-
- Production date from: 19950725
- Production date to: 20200522
- Packaging length [cm]: 10,0
- Packaging width [cm]: 10,0
- Packaging height [cm]: 2,0
- Quantity: 2
- Condition: New
Over 100 in stock
Best prices
Sparepartstore24.co.uk guarantees high-quality car parts at very attractive prices.
Save on shipping
Free shipping on orders over £ 130 within the UK
Fast delivery
