Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
-
Exhaust
- Lambda sensor HYUNDAI Accent I Hatchback (X-3) 1.5 92 hp Petrol
- Turbo solenoid valve HYUNDAI Accent I Hatchback (X-3) 1.5 92 hp Petrol
- Exhaust hanger HYUNDAI Accent I Hatchback (X-3) 1.5 92 hp Petrol
- Exhaust manifold gasket HYUNDAI Accent I Hatchback (X-3) 1.5 92 hp Petrol
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Lambda sensor HYUNDAI Accent I Hatchback (X-3) 1.5 92 hp Petrol
Article №: 3922L0222
Details
-
- Oxygen Sensor: Regulating Probe, Diagnostic Probe
- Fitting Position: before catalytic converter, after catalytic converter
- not for emission standard: 96 EEC
- Oxygen Sensor: Unheated
- Thread Size: M18x1,5
- Cable Length [mm]: 200
- Number of circuits: 1
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with fastening/mounting material
- Condition: New
More
£22,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0227
Details
-
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Exhaust System: before catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 570
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£36,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKLS-0140072
Details
-
- Oxygen Sensor: Regulating Probe, Diagnostic Probe
- Fitting Position: before catalytic converter, after catalytic converter
- not for emission standard: 96 EEC
- Oxygen Sensor: Unheated
- Thread Size: M18x1,5
- Cable Length [mm]: 200
- Number of circuits: 1
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with fastening/mounting material
- Condition: New
More
£22,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0222P
Details
-
- Oxygen Sensor: Regulating Probe, Diagnostic Probe
- Fitting Position: before catalytic converter, after catalytic converter
- not for emission standard: 96 EEC
- Oxygen Sensor: Unheated
- Thread Size: M18x1,5
- Cable Length [mm]: 230
- Number of circuits: 1
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with fastening/mounting material
- Condition: New
More
£24,69
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: F 00H L00 311
Details
-
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- not for emission standard: 96 EEC
- Overall Length [mm]: 422
- Number of circuits: 1
- Recommended change interval [km]: 100000
- Available as universal article as well, see article no.: 0258986501
- Condition: New
More
£28,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 59-0051
Details
-
- Construction Year to: 07/1999
- Fitting Position: after catalytic converter
- not for emission standard: 96 EEC
- Oxygen Sensor: Unheated
- Overall Length [mm]: 422
- Number of circuits: 1
- Recommended change interval [km]: 100000
- Condition: New
More
£32,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 258 986 501
Details
-
- Oxygen Sensor: Regulating Probe, Diagnostic Probe
- Fitting Position: before catalytic converter, after catalytic converter
- not for emission standard: 96 EEC
- Number of circuits: 1
- Recommended change interval [km]: 80000
- Connector/Clamp: Connector may need adjustment
- Condition: New
More
£33,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0227P
Details
-
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Exhaust System: before catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 570
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£35,74
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKLS-0140089
Details
-
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Exhaust System: before catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 570
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£36,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCC9220145
Details
-
- Oxygen Sensor: Regulating Probe, Diagnostic Probe
- Fitting Position: before catalytic converter, after catalytic converter
- not for emission standard: 96 EEC
- Oxygen Sensor: Unheated
- Thread Size: M18x1,5
- Cable Length [mm]: 200
- Number of circuits: 1
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with fastening/mounting material
- Condition: New
More
£43,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 258 986 505
Details
-
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Exhaust System: before catalytic converter
- Number of circuits: 4
- Recommended change interval [km]: 160000
- Connector/Clamp: Connector may need adjustment
- Condition: New
More
£45,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 258 986 007
Details
-
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Exhaust System: before catalytic converter
- Overall Length [mm]: 380
- Number of circuits: 4
- Recommended change interval [km]: 160000
- Available as universal article as well, see article no.: 0258986505
- Condition: New
More
£63,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCC9220158
Details
-
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Exhaust System: before catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 570
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£70,87
incl. 20% VAT, excl. delivery costs
In stock
Details
£68,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: YT-1753
Details
- Material: Chrome-Molybdenum Steel
- Spanner Size: 22
More
£4,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: YT-1754
Details
- Material: Chrome Vanadium Steel
- Spanner Size: 22
More
£4,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: HT8G323
Details
- Drive side (profile): Rectangle
- Drive [inch]: 1/2
- Work side (profile): Hexagon
- Spanner Size: 22
- Length [mm]: 50
- Vehicle type: VW, BMW, Audi, Ford, Skoda, SEAT
- Weight [g]: 225
More
£6,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 907G2-01
Details
- Spanner Size: 1/2x7/8x50mmL
- Weight [g]: 250
More
£8,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: HT8G324
Details
- Drive side (profile): Rectangle
- Drive [inch]: 3/8
- Work side (profile): Hexagon
- Spanner Size: 22
- Length [mm]: 80
- Weight [g]: 278
More
£8,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 9G1403
Details
- Bolt Head-/Nut Design: Hexagon, Double Hexagon
- Spanner Size: 22 mm
- Drive [inch]: 3/8"
- Square Drive Tang Size [mm (inch)]: 10 (3/8")
More
£13,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: YT-1752
Details
- Material: Chrome Vanadium Steel, Chrome-Molybdenum Steel
- Length [mm]: 30-80
- Number of tools: 3
- Spanner Size: 22
More
£15,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 150.2128
Details
- Drive side (profile): Rectangle
- Square Drive Tang Size [mm (inch)]: 10 (3/8")
- Drive [inch]: 3/8
- Spanner Size: 22,0
- Bolt Head-/Nut Design: Hexagon
- DIN/ISO: DIN 3120, ISO 1174
- Material: Chrome-Molybdenum Steel
- Total Length [mm]: 90
- Weight [g]: 240
- Condition: New
More
£16,51
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 26026L
Details
- Spanner Size: 22
- Length [mm]: 150
- Width [mm]: 30
- Height [mm]: 30
- Quality: Premium
- Weight [kg]: 0,35
- Drive side (profile): Rectangle
- Drive [inch]: 1/2
- Work side (profile): Double Hexagon
- Vehicle type: BMW, Ford, Mercedes-Benz, Opel
- Weight [g]: 350
- Condition: New
More
£20,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: OK-02.0601
Details
- Spanner Size: 22
- Work side (profile): Hexagon
- Tool handle type: Non-slip Handle
- Surface: Polished, Chromed
- Material: Chrome Vanadium Steel
More
£23,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: YT-1751
Details
- Spanner Size: 22, 27
- Number of tools: 7
- Weight [kg]: 2.2
More
£26,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 89 products
Show the next items
- 1
- 2
- 3
- 4
