Car part
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Ignition and preheating
- Oils and fluids
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
-
Suspension
- Suspension arm HONDA Orthia Estate 2.0 4WD (EL3) 150 hp Petrol
- Wheel hub HONDA Orthia Estate 2.0 4WD (EL3) 150 hp Petrol
- Wheel bearing HONDA Orthia Estate 2.0 4WD (EL3) 150 hp Petrol
- Top strut mount and bearing HONDA Orthia Estate 2.0 4WD (EL3) 150 hp Petrol
- Anti-roll bar link HONDA Orthia Estate 2.0 4WD (EL3) 150 hp Petrol
- Track rod end HONDA Orthia Estate 2.0 4WD (EL3) 150 hp Petrol
- Engine mount HONDA Orthia Estate 2.0 4WD (EL3) 150 hp Petrol
- Suspension kit HONDA Orthia Estate 2.0 4WD (EL3) 150 hp Petrol
- Ball joint HONDA Orthia Estate 2.0 4WD (EL3) 150 hp Petrol
- Suspension bushes HONDA Orthia Estate 2.0 4WD (EL3) 150 hp Petrol
- Shock absorber dust cover and bump stops ORTHIA 2.0 4WD (EL3) 150 hp Petrol
- Anti-roll bar bushes ORTHIA 2.0 4WD (EL3) 150 hp Petrol
- Wheel bolts and wheel nuts ORTHIA 2.0 4WD (EL3) 150 hp Petrol
- Steering rack boot ORTHIA 2.0 4WD (EL3) 150 hp Petrol
- Spring cap ORTHIA 2.0 4WD (EL3) 150 hp Petrol
- Camber bolts ORTHIA 2.0 4WD (EL3) 150 hp Petrol
- Repair kit, support- / steering link ORTHIA 2.0 4WD (EL3) 150 hp Petrol
- Steering mounting ORTHIA 2.0 4WD (EL3) 150 hp Petrol
- Wiper and washer system
Suspension kit HONDA Orthia Estate 2.0 4WD (EL3) 150 hp Petrol
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
HONDA Orthia Estate 2.0 4WD (EL3) year of manufacture 1995, 150 hp vehicle parts products
incl. 20% VAT, excl. delivery costs
- Quantity: 2
- Packaging length [cm]: 8,0
- Packaging width [cm]: 8,0
- Packaging height [cm]: 2,7
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Length [mm]: 102
- Thread Size: M14x1,5
- Packaging width [cm]: 2,8
- Packaging height [cm]: 2,8
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Supplementary Article / Supplementary Info Info 2: with grease cap
- Fitting Position: Front Axle
- Required quantity: 1
- Colour: red
- Material: PU (Polyurethane)
- Number of Parts [parts]: 4
- Shore-A hardness value, base body: 80
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Supplementary Article / Supplementary Info Info 2: with grease cap
- Fitting Position: Rear Axle, Front Axle
- Required quantity: 1
- Material: PU (Polyurethane)
- Control/Trailing Arm Type: for trailing arm, for control arm
- Weight [kg]: 3,516
- Number of Parts [parts]: 16
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Lower, Front Axle Left
- Paired product: 532435
- Condition: New
Over 100 in stock
Control arm repair kit Control Arm (FAG)
incl. 20% VAT, free delivery
- Control/Trailing Arm Type: Control Arm
- Material: Cast Steel
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Weight [kg]: 0,087
- Packaging length [cm]: 8,6
- Packaging width [cm]: 2,4
- Packaging height [cm]: 2,4
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Length [mm]: 108
- Thread Size: M14x1,5
- Packaging width [cm]: 2,8
- Packaging height [cm]: 2,8
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Control/Trailing Arm Type: Control Arm
- Quantity Unit: Set
- Required quantity: 1
- Fitting Position: Front Axle, Front Axle Right, Front Axle Left
- Net weight [kg]: 2,35
- Gross Weight [kg]: 2,45
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Lower, Front Axle Right
- Paired product: 532436
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Control/Trailing Arm Type: Control Arm
- Quantity Unit: Set
- Required quantity: 1
- Fitting Position: Front Axle, Front Axle Right, Front Axle Left
- Net weight [kg]: 7,75
- Gross Weight [kg]: 7,85
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Weight [kg]: 0,19
- Supplementary Article / Supplementary Info Info 2: with nut, with eccentric washer
- Control/Trailing Arm Type: for control arm
- Fitting Position: Rear Axle both sides, Rear, inner, Lower
- Required quantity: 1
- Diameter [mm]: 28
- Thread Size: M10X1.25
- Quality/ Grade: 10.9
- Surface: Zinc-coated
- Thread Length [mm]: 15
- Screw length below head [mm]: 72
- Spanner Size: 14
- Condition: New
Over 100 in stock
