Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs Honda Accord CL7 2.0 (CL7) 155 hp Petrol
- Brake pads Honda Accord CL7 2.0 (CL7) 155 hp Petrol
- Brake caliper Honda Accord CL7 2.0 (CL7) 155 hp Petrol
- Drum brake Honda Accord CL7 2.0 (CL7) 155 hp Petrol
- ABS sensor Honda Accord CL7 2.0 (CL7) 155 hp Petrol
- Brake caliper repair kit Honda Accord CL7 2.0 (CL7) 155 hp Petrol
- Handbrake Honda Accord CL7 2.0 (CL7) 155 hp Petrol
- Brake disc back plate Honda Accord CL7 2.0 (CL7) 155 hp Petrol
- Brake caliper carrier Honda Accord CL7 2.0 (CL7) 155 hp Petrol
- Brake hose Honda Accord CL7 2.0 (CL7) 155 hp Petrol
- Master cylinder ACCORD 2.0 (CL7) 155 hp Petrol
- Brake drum ACCORD 2.0 (CL7) 155 hp Petrol
- Handbrake cable ACCORD 2.0 (CL7) 155 hp Petrol
- Vacuum pump ACCORD 2.0 (CL7) 155 hp Petrol
- Guide sleeve kit, brake caliper ACCORD 2.0 (CL7) 155 hp Petrol
- Handbrake shoes ACCORD 2.0 (CL7) 155 hp Petrol
- Brake fluid ACCORD 2.0 (CL7) 155 hp Petrol
- Brake pad fitting kit ACCORD 2.0 (CL7) 155 hp Petrol
- Accessory kit, brake shoes ACCORD 2.0 (CL7) 155 hp Petrol
- Brake pads and discs ACCORD 2.0 (CL7) 155 hp Petrol
- Brake light switch ACCORD 2.0 (CL7) 155 hp Petrol
- Brake caliper piston ACCORD 2.0 (CL7) 155 hp Petrol
- Brake disc bolts ACCORD 2.0 (CL7) 155 hp Petrol
- Master cylinder repair kit ACCORD 2.0 (CL7) 155 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs Honda Accord CL7 2.0 155 hp Petrol

Article №: 82B1140
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 259,7
- Brake Disc Type: solid
- Number of Holes: 5/9
- Wheel Bolt Bore Diameter [mm]: 12,8
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 9,2
- Centering Diameter [mm]: 64,2
- Height [mm]: 48,6
- Surface: Uncoated
- Machining: Untreated
- Manufacturer Restriction: Nissin
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-54%
compared to RRP:
£ 45,90
£ 20,67
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 82B0279
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 260
- Brake Disc Type: solid
- Number of Holes: 5/9
- Wheel Bolt Bore Diameter [mm]: 12,5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 64,1
- Height [mm]: 49,2
- Surface: Uncoated
- Machining: Untreated
- Manufacturer Restriction: Lucas
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-41%
compared to RRP:
£ 36,20
£ 21,14
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 82B1481
Details
- Fitting Position: Front Axle
- Diameter [mm]: 282
- Brake Disc Type: Vented
- Number of Holes: 5/9
- Wheel Bolt Bore Diameter [mm]: 12,8
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 23
- Minimum thickness [mm]: 21
- Centering Diameter [mm]: 64,2
- Inner Diameter [mm]: 141,7
- Height [mm]: 47
- Surface: Uncoated
- Material: Cast Iron
- Brake Size: 15"
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Bore Diameter up to [mm]: 12,8
- Drilled: no
- Condition: New
More
-52%
compared to RRP:
£ 55,20
£ 26,31
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 82B0569
Details
- Fitting Position: Front Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Number of Holes: 5/9
- Wheel Bolt Bore Diameter [mm]: 12,6
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 64
- Height [mm]: 47
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- fulfils ECE norm: ECE-R90
- Drilled: no
- Condition: New
More
-45%
compared to RRP:
£ 48,20
£ 26,31
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 82B0308
Details
- Fitting Position: Front Axle
- Diameter [mm]: 299,8
- Brake Disc Type: Vented
- Number of Holes: 5/9
- Wheel Bolt Bore Diameter [mm]: 12,6
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 64
- Height [mm]: 46,9
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Brake Size: 16"
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-38%
compared to RRP:
£ 56,40
£ 34,77
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 82B0525
Details
- Fitting Position: Front Axle
- Diameter [mm]: 279,7
- Brake Disc Type: Vented
- Number of Holes: 5/9
- Wheel Bolt Bore Diameter [mm]: 12,6
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 64
- Height [mm]: 47,2
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Brake Size: 15"
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-18%
compared to RRP:
£ 46,10
£ 37,59
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: SKBD-0023290
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 259,7
- Brake Disc Type: solid
- Number of Holes: 5/9
- Wheel Bolt Bore Diameter [mm]: 12,8
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 9,2
- Centering Diameter [mm]: 64,2
- Height [mm]: 48,6
- Surface: Uncoated
- Machining: Untreated
- Manufacturer Restriction: Nissin
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-70%
compared to RRP:
£ 45,90
£ 13,46
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: SKBD-0020284
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 260
- Brake Disc Type: solid
- Number of Holes: 5/9
- Wheel Bolt Bore Diameter [mm]: 12,5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 64,1
- Height [mm]: 49,2
- Surface: Uncoated
- Machining: Untreated
- Manufacturer Restriction: Lucas
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-41%
compared to RRP:
£ 36,20
£ 21,14
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 562542CH
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 260
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 64
- Height [mm]: 49
- Weight [kg]: 8,23
- Tightening Torque [Nm]: 108
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packing Type: Box
- Packaging length [cm]: 27
- Packaging width [cm]: 27,5
- Packaging height [cm]: 12
- Drilled: no
- Condition: New
More
£ 21,61
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 25201
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 260
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 64,2
- Height [mm]: 49
- Bore Diameter [mm]: 12,5
- Drilled: no
- Condition: New
More
£ 22,55
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: H1019P
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 260
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 64,2
- Height [mm]: 49
- Drilled: no
- Condition: New
More
£ 24,43
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 23-1648C
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 259,5
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 9,1
- Centering Diameter [mm]: 64,2
- Height [mm]: 48,6
- Surface: Painted
- Test Mark: ECE-R90, ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£ 26,31
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: SKBD-0023624
Details
- Fitting Position: Front Axle
- Diameter [mm]: 282
- Brake Disc Type: Vented
- Number of Holes: 5/9
- Wheel Bolt Bore Diameter [mm]: 12,8
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 23
- Minimum thickness [mm]: 21
- Centering Diameter [mm]: 64,2
- Inner Diameter [mm]: 141,7
- Height [mm]: 47
- Surface: Uncoated
- Material: Cast Iron
- Brake Size: 15"
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Bore Diameter up to [mm]: 12,8
- Drilled: no
- Condition: New
More
-52%
compared to RRP:
£ 55,20
£ 26,31
incl. 20% VAT, excl. delivery costs
In stock
Details


Article №: 82B0279P
Details
-
- Fitting Position: Rear Axle
- Manufacturer Restriction: Lucas
- Fitting Position: Rear Axle
- Diameter [mm]: 260
- Brake Disc Type: solid
- Number of Holes: 5/9
- Wheel Bolt Bore Diameter [mm]: 12,5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 64,1
- Height [mm]: 49,2
- Surface: Coated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£ 26,55
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 6056667
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 260, 259,7
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10
- Production Number: K6056667
- Condition: New
More
£ 27,25
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 19-1843
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 260
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 64,2
- Height [mm]: 49,1
- Weight [kg]: 3,76
- Surface: Painted
- Test Mark: E190R02 02C0190/0273
- Drilled: no
- Condition: New
More
£ 28,66
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 3463201000
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 260
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10
- Surface: Coated
- Manufacturer Restriction: LUCAS
- Drilled: no
- Condition: New
More
-21%
compared to RRP:
£ 36,31
£ 28,66
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 231-04-101-2
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 260
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 64,2
- Height [mm]: 49
- Required quantity: 2
- Test Mark: ECE R90
- Replace in pairs only
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£ 29,13
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: B130631
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 260
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,0
- Centering Diameter [mm]: 64,2
- Inner Diameter [mm]: 140,4
- Height [mm]: 49
- Bore Diameter [mm]: 12,6
- Drilled: no
- Condition: New
More
£ 30,07
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 6056626
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 282, 281,9
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 9
- Production Number: K6056626
- Condition: New
More
£ 32,42
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 61-04-443C
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 259,5
- Brake Disc Type: solid
- Number of bores: 5
- Bolt Hole Circle Ø [mm]: 64
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 9
- Height [mm]: 49,2
- Surface: Painted
- Tightening Torque [Nm]: 108
- Test Mark: ECE R90 APPROVED
- for OE number: 42510SEAE00
- Drilled: no
- Condition: New
More
£ 33,83
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: A26-40010
Details
-
- Fitting Position: Rear Axle
- Manufacturer Restriction: Nissin
- Diameter [mm]: 260
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 64,2
- Height [mm]: 48,7
- Brake Disc Hub Height [mm]: 39,7
- Packaging width [cm]: 26
- Packaging height [cm]: 26
- Packaging Depth [cm]: 10
- Drilled: no
- Condition: New
More
-63%
compared to RRP:
£ 93,03
£ 34,30
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 103163
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 260
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 64, 64,2
- Height [mm]: 49
- Surface: Coated
- Drilled: no
- Condition: New
More
£ 37,12
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: A26-40016
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 282
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 7,5
- Centering Diameter [mm]: 64,2
- Height [mm]: 61,1
- Brake Disc Hub Height [mm]: 52,1
- Packaging width [cm]: 30
- Packaging height [cm]: 30
- Packaging Depth [cm]: 13
- Drilled: no
- Condition: New
More
-66%
compared to RRP:
£ 116,44
£ 39,00
incl. 20% VAT, excl. delivery costs
In stock
Details


Article №: GCH20285
Details
-
- Fitting Position: Rear Axle
- Manufacturer Restriction: Lucas
- Fitting Position: Rear Axle
- Diameter [mm]: 260
- Brake Disc Type: solid
- Number of Holes: 5/9
- Wheel Bolt Bore Diameter [mm]: 12,5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 64,1
- Height [mm]: 49,2
- Surface: Coated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£ 65,02
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 300 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- ...
- 11
- 12