Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs Honda Accord 5 Coupe 2.2i ES (CD7) 150 hp Petrol
- Brake pads Honda Accord 5 Coupe 2.2i ES (CD7) 150 hp Petrol
- Brake caliper Honda Accord 5 Coupe 2.2i ES (CD7) 150 hp Petrol
- ABS sensor Honda Accord 5 Coupe 2.2i ES (CD7) 150 hp Petrol
- Brake caliper repair kit Honda Accord 5 Coupe 2.2i ES (CD7) 150 hp Petrol
- Handbrake Honda Accord 5 Coupe 2.2i ES (CD7) 150 hp Petrol
- Master cylinder Honda Accord 5 Coupe 2.2i ES (CD7) 150 hp Petrol
- Brake caliper carrier Honda Accord 5 Coupe 2.2i ES (CD7) 150 hp Petrol
- Brake hose Honda Accord 5 Coupe 2.2i ES (CD7) 150 hp Petrol
- Handbrake cable Honda Accord 5 Coupe 2.2i ES (CD7) 150 hp Petrol
- Guide sleeve kit, brake caliper ACCORD 2.2i ES (CD7) 150 hp Petrol
- Handbrake shoes ACCORD 2.2i ES (CD7) 150 hp Petrol
- Brake fluid ACCORD 2.2i ES (CD7) 150 hp Petrol
- Brake pad fitting kit ACCORD 2.2i ES (CD7) 150 hp Petrol
- Brake pads and discs ACCORD 2.2i ES (CD7) 150 hp Petrol
- Brake light switch ACCORD 2.2i ES (CD7) 150 hp Petrol
- Abs ring ACCORD 2.2i ES (CD7) 150 hp Petrol
- Brake caliper piston ACCORD 2.2i ES (CD7) 150 hp Petrol
- High-performance brake pads ACCORD 2.2i ES (CD7) 150 hp Petrol
- Handbrake repair kit ACCORD 2.2i ES (CD7) 150 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs Honda Accord 5 Coupe 2.2 i ES 150 hp Petrol
Article №: 82B0269
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 259,5
- Brake Disc Type: solid
- Number of Holes: 4/8
- Wheel Bolt Bore Diameter [mm]: 12,8
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 64,1
- Inner Diameter [mm]: 155,5
- Height [mm]: 48,6
- Surface: Uncoated
- Material: Cast Iron
- Bore Diameter [mm]: 12,8
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-32%
compared to RRP:
£ 27,90
£ 18,79
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 15523
Details
-
- Construction Year from: 01/1994
- Construction Year to: 01/1998
- Fitting Position: Rear Axle
- Diameter [mm]: 260
- Brake Disc Type: solid
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Weight [kg]: 1,85
- Drilled: no
- Condition: New
More
£ 18,79
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 16183
Details
-
- Fitting Position: Front Axle
- Braking/Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 282
- Brake Disc Type: Vented
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 23
- Centering Diameter [mm]: 92
- Hub Diameter [mm]: 152
- Height [mm]: 34,5
- Weight [kg]: 5,73
- Drilled: no
- Condition: New
More
£ 19,73
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 16147
Details
-
- Fitting Position: Rear Axle
- Braking/Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 260
- Brake Disc Type: solid
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 64
- Hub Diameter [mm]: 168
- Height [mm]: 48,5
- Weight [kg]: 3,75
- Drilled: no
- Condition: New
More
-73%
compared to RRP:
£ 76,79
£ 20,20
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: A4211P
Details
-
- Construction Year from: 01/1994
- Construction Year to: 01/1998
- Fitting Position: Rear Axle
- Diameter [mm]: 260
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 64
- Brake System: KELSEY HAYES
- Height [mm]: 48
- Drilled: no
- Condition: New
More
£ 21,14
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BG2666
Details
-
- Fitting Position: Rear Axle
- Construction Year to: 12/1994
- Brake System: Akebono
- for model code: CB7/CD7
- Diameter [mm]: 260
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 64
- Height [mm]: 48,5
- Surface: Oiled
- Test Mark: E1 90R-02C0100/0035
- Drilled: no
- Condition: New
More
£ 21,61
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 10773
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 260
- Brake Disc Type: solid
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 114,3
- Thickness [mm]: 48,6
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 64
- Weight [kg]: 3,94
- Surface: Coated
- Observe service information
- Drilled: no
- Condition: New
More
-54%
compared to RRP:
£ 49,98
£ 22,55
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADH24325
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 260
- Brake Disc Type: solid
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 114
- Thickness [mm]: 49
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 64
- Weight [kg]: 3,940
- Surface: Coated
- Observe service information
- Drilled: no
- Condition: New
More
-69%
compared to RRP:
£ 77,98
£ 23,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 08.5803.10
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 260
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 64
- Height [mm]: 49
- Tightening Torque [Nm]: 108
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£ 23,96
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: A4211P
Details
-
- Construction Year from: 01/1994
- Construction Year to: 01/1998
- Fitting Position: Rear Axle
- Diameter [mm]: 260
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 64
- Brake System: KELSEY HAYES
- Height [mm]: 48
- Drilled: no
- Condition: New
More
£ 24,90
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BG3063
Details
-
- Fitting Position: Front Axle, Rear Axle
- Brake System: Akebono
- for model code: CD7
- Construction Year from: 01/1995
- Diameter [mm]: 282
- Brake Disc Type: Vented
- Number of Holes: 4
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 23
- Centering Diameter [mm]: 92
- Height [mm]: 35
- Surface: Oiled
- Test Mark: E1 90R-02C0074/1597
- Drilled: no
- Condition: New
More
£ 25,37
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8DD 355 105-311
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 260
- Brake Disc Type: solid
- Hole Arrangement/Number: 04/09
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 64,1
- Height [mm]: 48,8
- Weight [kg]: 3,8
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
-73%
compared to RRP:
£ 97,59
£ 25,84
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 23-0361
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 260,0
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness [mm]: 10,0
- Centering Diameter [mm]: 64,1
- Height [mm]: 48,7
- Test Mark: ECE-R90
- Drilled: no
- Condition: New
More
£ 26,31
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-0931
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 260
- Brake Disc Type: solid
- Bolt Hole Circle Ø [mm]: 114
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 64,1
- Height [mm]: 48,8
- Technical Information Number: 98200 0817 0 1
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Packaging length [cm]: 30
- Packaging width [cm]: 28,5
- Packaging height [cm]: 11,5
- Drilled: no
- Condition: New
More
£ 26,78
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 986 478 172
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 259,5
- Brake Disc Type: solid
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 64,13
- Height [mm]: 48,7
- Surface: Oiled
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 12,7
- Drilled: no
- Condition: New
More
£ 26,78
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: A26-80021
Details
- Fitting Position: Front Axle
- Diameter [mm]: 282
- Brake Disc Type: Vented
- Construction Year to: 09/1997, 01/1998
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 23
- Centering Diameter [mm]: 92
- Height [mm]: 34,5
- Brake Disc Hub Height [mm]: 9,5
- Packaging width [cm]: 30
- Packaging height [cm]: 30
- Packaging Depth [cm]: 7
- Drilled: no
- Condition: New
More
-74%
compared to RRP:
£ 112,53
£ 28,66
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6448.00
Details
-
- Construction Year from: 06/1995
- Construction Year to: 06/1996
- Fitting Position: Rear Axle
- Diameter [mm]: 260
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 64,1
- Height [mm]: 48,6
- Weight [kg]: 3,75
- Test Mark: K.B.A.: 61210
- Drilled: no
- Condition: New
More
£ 29,60
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6205.10
Details
- Fitting Position: Front Axle
- Diameter [mm]: 259
- Brake Disc Type: Vented
- Number of Holes: 4
- Brake Disc Thickness [mm]: 23
- Minimum thickness [mm]: 21
- Centering Diameter [mm]: 92
- Height [mm]: 34
- Weight [kg]: 4,8
- Test Mark: K.B.A.: 61209
- Drilled: no
- Condition: New
More
£ 30,54
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADH24339
Details
- Fitting Position: Front Axle
- Diameter [mm]: 282
- Brake Disc Type: internally vented
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 114
- Thickness [mm]: 34
- Brake Disc Thickness [mm]: 23
- Minimum thickness [mm]: 21
- Centering Diameter [mm]: 92
- Weight [kg]: 5,980
- Surface: Coated
- Observe service information
- Drilled: no
- Condition: New
More
-72%
compared to RRP:
£ 113,98
£ 31,48
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8DD 355 104-971
Details
- Fitting Position: Front Axle
- Diameter [mm]: 282
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 04/04
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 23
- Centering Diameter [mm]: 92
- Height [mm]: 34,5
- Weight [kg]: 5,9
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
£ 31,48
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: A26-40002
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 260
- Brake Disc Type: solid
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 64,1
- Height [mm]: 48,7
- Brake Disc Hub Height [mm]: 38,7
- Packaging width [cm]: 28
- Packaging height [cm]: 28
- Packaging Depth [cm]: 10
- Drilled: no
- Condition: New
More
-55%
compared to RRP:
£ 73,95
£ 32,89
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 61-04-407
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 259,6
- Brake Disc Type: solid
- Number of bores: 4
- Bolt Hole Circle Ø [mm]: 64
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Height [mm]: 49,3
- Tightening Torque [Nm]: 108
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£ 32,89
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24011002331PR-PCS-MS
Details
-
- Construction Year from: 01/1994
- Construction Year to: 01/1998
- Fitting Position: Rear Axle
- Diameter [mm]: 260
- Brake Disc Type: solid
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 114
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,0
- Centering Diameter [mm]: 64,1
- Inner Diameter [mm]: 155,0
- Height [mm]: 48,7
- Surface: Coated
- Required quantity: 2
- Bore Diameter [mm]: 12,8
- Net weight [kg]: 4
- Gross Weight [kg]: 4
- Drilled: no
- Condition: New
More
-25%
compared to RRP:
£ 46,98
£ 34,77
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: A26-80006
Details
-
- Fitting Position: Front Axle
- Braking/Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 282
- Brake Disc Type: Vented
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 23
- Minimum thickness [mm]: 21
- Centering Diameter [mm]: 92
- Height [mm]: 34
- Brake Disc Hub Height [mm]: 11
- Packaging width [cm]: 31,2
- Packaging height [cm]: 29,7
- Packaging Depth [cm]: 7,8
- Drilled: no
- Condition: New
More
-68%
compared to RRP:
£ 112,53
£ 35,24
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 60-04-401C
Details
- Fitting Position: Front Axle
- Diameter [mm]: 281,2
- Brake Disc Type: Vented
- Number of bores: 4
- Bolt Hole Circle Ø [mm]: 92
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 23
- Height [mm]: 35
- Surface: Painted
- Tightening Torque [Nm]: 108
- Test Mark: ECE R90 APPROVED
- for OE number: 45251SM5A00
- Drilled: no
- Condition: New
More
£ 35,71
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 129 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
