-
Bestsellers
-
Body
-
Brakes
-
Damping
-
Electrics
-
Engine
-
Engine cooling system
-
Exhaust
-
Filters
-
Gaskets and sealing rings
-
Ignition and preheating
-
Oils and fluids
-
Sensors, relays, control units
-
Steering
-
Suspension
-
Wiper and washer system
Parts FORD USA Mustang Mk1 Convertible 3.3 122 hp
-
Oil filter
-
Anti-roll bar link
-
Suspension arm
-
Top strut mount and bearing
-
Track rod end
-
Suspension bushes
-
Anti-roll bar bushes
-
Inner tie rod
-
Engine coolant
Body
Top
A-Z
-
Headlights
-
Daytime running lights
-
Licence plate holder / bracket
Brakes
Top
A-Z
-
Brake discs
-
Brake pads
-
Brake hose
Electrics
Top
A-Z
-
Tyre pressure sensor (TPMS)
Engine
Top
A-Z
-
Oil filter
-
Ignition leads
-
Engine coolant
Exhaust
Top
A-Z
-
Lambda sensor
Gaskets and sealing rings
Top
A-Z
-
Door seal
Ignition and preheating
Top
A-Z
-
Ignition leads
Oils and fluids
Top
A-Z
-
Engine coolant
-
Screenwash
Sensors, relays, control units
Top
A-Z
-
Tyre pressure sensor (TPMS)
Suspension
Top
A-Z
Wiper and washer system
Top
A-Z
-
Wiper blades
-
Screenwash
Automotive products for FORD USA Mustang Mk1 Convertible 3.3 1965 year, 122 hp
incl. 20% VAT, excl. delivery costs
- Temperature range from [°C]: -37
- Capacity [litre]: 1
- Colour: yellow
- Properties: Ready mixed
- Coolant manufacturer recommendation: other
- Ready to use
- Temperature range to [°C]: +129
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Packing Type: Bag
- Capacity [ml]: 5
- Weight [g]: 5
- Colour: transparent
- Chemical Properties: Long-term Protection, high corrosion protection, Heat-resistant, Water-repellent, Saltwater-Resistant, not metalliferous, Silicon-free
- Observe technical data
- Observe mounting information
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Quantity Unit: Kit
- Nominal Size [mm]: 4,5
- Pipe length [mm]: 500
- Material: POM (Polyoxymethylene), Polyamid 6, EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Supplementary Article / Supplementary Info Info 2: with connecting pipe
- Supplementary Article / Supplementary Info: with gaskets/seals
- Packing Type: Blister Pack
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Product line: Powersport
- Thread Length [mm]: 11,7
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 21 mm
- Spark Plug: 1 - Earthed Electrode, with taper seat, Copper Centre Electrode
- Thread Size: M18x1.5
- Connector type: SAE
- Required quantity: 6
- Packing Type: Box
- Quality/ Grade: Nickel GE
- Technical Information Number: RF11YC
- Tightening torque from [Nm]: 20
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 9,5
- Packaging width [cm]: 2,4
- Packaging height [cm]: 2,2
- Resistor from [kOhm]: 6
- Resistor to [kOhm]: 15
- Projection [mm]: 1,5
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Filter type: Spin-on Filter
- Height [mm]: 137
- Diameter [mm]: 93
- Condition: New
Over 100 in stock

incl. 20% VAT, excl. delivery costs
-
- Fitting Position: transmission sided
- for model year: 1970
- Diameter [mm]: 27
- Length [mm]: 92
- Weight [kg]: 0,612
- Packaging width [cm]: 9,2
- Packaging height [cm]: 3,3
- Condition: New
Over 100 in stock

incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle
- Inner Diameter [mm]: 14,3
- only in connection with: 3 x nut
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
-
- Fitting Position: Front Axle
- Quantity per axle: 2
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Oil Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top eye, Bottom Fork
- max. length [mm]: 367
- min. length [mm]: 250
- Colour: red
- adjustable: adjustable
- Packaging length [cm]: 500
- Packaging width [cm]: 85
- Packaging height [cm]: 85
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear, Lower, Front Axle Left
- Material: Sheet Steel
- Control/Trailing Arm Type: Trailing Arm
- Length [mm]: 225
- Cone Size [mm]: 19,2
- Paired product: 45261
- Thread Size 1: MM14X1,5R
- Rod/Strut: Push Rod
- only in connection with: Ball joint
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle, Left, Right
- Weight [kg]: 0.7
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Temperature range from [°C]: -37
- Capacity [litre]: 1
- Concentrate
- Colour: yellow
- Properties: Concentrate
- Coolant manufacturer recommendation: other
- Temperature range to [°C]: +129
- Condition: New
Over 100 in stock

incl. 20% VAT, excl. delivery costs
- Packing Type: Tin
- Capacity [ml]: 200
- Quantity Unit: Millilitre
- Consistency (property): Creamy
- Temperature range from [°C]: -40
- Temperature range to [°C]: 1500
- Chemical Properties: Food-Safe, Long-term Protection, Heat-resistant, not metalliferous, Water-repellent, Saltwater-Resistant, Silicon-free
- Observe technical data
- Observe mounting information
- Condition: New
Over 100 in stock
Best prices
Sparepartstore24.co.uk guarantees high-quality car parts at very attractive prices.
Save on shipping
Free shipping on orders over £ 140 within the UK
Fast delivery