FORD USA Mustang Mk1 Convertible - Typ: 3.3
- Manuf. year (from - to): 09.1967 - 12.1969
- Car body type: Convertible
- Type of drive: Rear-Wheel Drive
- Cylinder capacity (cc): 3273
- Cylinders: 6
- Engine type: Petrol Engine
- Power: 117
- ABS: without ABS
- Valves per combustion chamber: 2
- Fuel type: Petrol
- Fuel handling: Intake Manifold Injection/ Carburettor
- Catalyst: without catalytic convertor
PARTS FORD USA Mustang Mk1 Convertible 3.3 117 hp Petrol Engine T1V 1967 - 1969
-
Bestsellers
-
Bearings
-
Body
-
Brakes
-
Damping
-
Electrics
-
Engine
-
Exhaust
-
Filters
-
Gaskets and sealing rings
-
Ignition and preheating
-
Oils and fluids
-
Sensors, relays, control units
-
Steering
-
Suspension
-
Wiper and washer system
Parts FORD USA Mustang Mk1 Convertible 3.3 117 hp
-
Oil filter
-
Wheel hub
-
Wheel bearing
Bearings
Top
A-Z
-
Wheel bearing
Body
Top
A-Z
-
Headlights
-
Daytime running lights
-
Licence plate holder / bracket
Brakes
Top
A-Z
-
Brake discs
-
Brake pads
-
Brake hose
Damping
Top
A-Z
-
Shock absorber
-
Top strut mount and bearing
Electrics
Top
A-Z
-
Tyre pressure sensor (TPMS)
Engine
Top
A-Z
-
Oil filter
-
Ignition leads
Exhaust
Top
A-Z
-
Lambda sensor
Filters
Top
A-Z
-
Oil filter
-
Air filter
-
Cabin filter
-
Fuel filter
Gaskets and sealing rings
Top
A-Z
-
Door seal
Ignition and preheating
Top
A-Z
-
Ignition leads
Oils and fluids
Top
A-Z
-
Screenwash
Sensors, relays, control units
Top
A-Z
-
Tyre pressure sensor (TPMS)
Steering
Top
A-Z
-
Track rod end
Suspension
Top
A-Z
-
Wheel bearing
-
Anti-roll bar link
-
Wheel hub
-
Tyre pressure sensor (TPMS)
Wiper and washer system
Top
A-Z
-
Wiper blades
-
Screenwash
Top Car parts maker
Automotive products for FORD USA Mustang Mk1 Convertible 3.3 1967 year, 117 hp
incl. 20% VAT, excl. delivery costs
- Quantity: 159
- Nominal Size [mm]: 4,5
- Pipe length [mm]: 2500
- for pipe diameter [mm]: 3, 4
- Material: POM (Polyoxymethylene), Polyamid 6, EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Supplementary Article / Supplementary Info Info 2: with connecting pipe, with adapter
- Supplementary Article / Supplementary Info: with gaskets/seals
- Version: NW 4,5mm -> 3,0mm, NW 4,5mm -> 4,0mm
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Filter type: Spin-on Filter
- Height [mm]: 137
- Diameter [mm]: 93
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 27
- Length [mm]: 92
- Weight [kg]: 0,612
- Packaging width [cm]: 9,2
- Packaging height [cm]: 3,3
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle
- Rod/Strut: Coupling Rod
- Length [mm]: 120
- Thread Size 1: MM12<1,25R
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle
- Inner Diameter [mm]: 31,5
- Length [mm]: 43
- Height [mm]: 64
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Temperature range from [°C]: -37
- Capacity [litre]: 20
- Concentrate
- Colour: yellow
- Properties: Concentrate
- Coolant manufacturer recommendation: other
- Temperature range to [°C]: +129
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Packing Type: Tin
- Capacity [ml]: 200
- Quantity Unit: Millilitre
- Consistency (property): Creamy
- Temperature range from [°C]: -40
- Temperature range to [°C]: 1500
- Chemical Properties: Food-Safe, Long-term Protection, Heat-resistant, not metalliferous, Water-repellent, Saltwater-Resistant, Silicon-free
- Observe technical data
- Observe mounting information
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Product line: Powersport
- Thread Length [mm]: 11,7
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 21 mm
- Spark Plug: 1 - Earthed Electrode, with taper seat, Copper Centre Electrode
- Thread Size: M18x1.5
- Connector type: SAE
- Packing Type: Box
- Quality/ Grade: Nickel GE
- Technical Information Number: RF11YC
- Tightening torque from [Nm]: 20
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 9,5
- Packaging width [cm]: 2,4
- Packaging height [cm]: 2,2
- Resistor from [kOhm]: 6
- Resistor to [kOhm]: 15
- Projection [mm]: 1,5
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle Upper, Front
- Inner Diameter [mm]: 14,2
- Mounting Type: Rubber-Metal Mount
- Control/Trailing Arm Type: for trailing arm
- Height [mm]: 37,8
- Diameter [mm]: 35,7
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle
- Inner Diameter [mm]: 14,3
- only in connection with: 3 x nut
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
-
- Fitting Position: Front Axle
- Quantity per axle: 2
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Oil Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top eye, Bottom Fork
- max. length [mm]: 367
- min. length [mm]: 250
- Colour: red
- adjustable: adjustable
- Packaging length [cm]: 500
- Packaging width [cm]: 85
- Packaging height [cm]: 85
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle
- Thread Size 1: MM16X1,5R
- Thread Size: MM18X1,5R
- Axle Joint Length [mm]: 290
- Condition: New
Over 100 in stock
Best prices
Sparepartstore24.co.uk guarantees high-quality car parts at very attractive prices.
Save on shipping
Free shipping on orders over £ 140 within the UK
Fast delivery
